TAIYO-YUDEN AMK042BJ104MC

Notice for TAIYO YUDEN products　Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called“TAIYO YUDEN’
s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and Foreign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
12
notice_e-01
HIGH VALUE MULTILAYER CERAMIC CAPACITORS(HIGH DIELECTRIC TYPE)
WAVE
■ FEATURES
■ APPLICATIONS
◦Improved higher density mounting.
（042 to 105 type）
◦Communication equipment
（cellular phone, wireless applications, etc.）
◦Monolithic structure provides higher reliability.
REFLOW
◦General digital circuit
◦A wide range of capacitance values available in standard case sizes.
◦Power supply bypass capacitors
Liquid crystal modules
Liquid crystal drive voltage lines
LSI, IC, converters(both for input and output)
◦T he use of nickel as electrode material and plating processing improve the solderability and heat resistance characteristics. It also
prevents migration and raises the level of reliability.
◦Low equivalent series resistance(ESR) provides superior noise absorption characteristics.
◦Smoothing capacitors
DC-DC converters (for both input and output)
Switching power supplies (secondary side)
◦Compared to tantalum or aluminum electrolytic capacitors, multilayer
ceramic capacitors offer a number of superior features, including:
Higher permissible ripple current values
Smaller case sizes with high rated voltage
Improved reliability due to higher insulation resistance and breakdown voltage.
■ PART NUMBER
J
M K
❶
❷
❶Rated
voltage
〔VDC〕
A
4
J 6.3
L 10
E 16
T 25
G 35
U 50
❸
❷Series name
M
❸End
termination
K Plated
Code
△
A
Type
ALL
063
105
107
212
316
325
105
B
107
212
3
1
6 △ B
❹
❺
❹Dimension
Type （inch） L×W［mm］
042 （01005） 0.4×0.2
063 （0201） 0.6×0.3
105 （0402） 1.0×0.5
107 （0603） 1.6×0.8
212 （0805） 2.0×1.25
316 （1206） 3.2×1.6
325 （1210） 3.2×2.5
J
❻
❻Temperature
characteristics code
B
BJ
X5R
B7
X7R
F
△F
Y5V
△＝Blank space
1
0
6 M L － T △
❼
❽
❼Nominal
❽Capacitance
capacitance
tolerance
〔pF〕
K
±10％
example
473
47,000
M
±20％
＋80％
105 1,000,000
Z
－20
❾
❾
Thickness
〔mm〕
C
P
0.2
0.3
V
0.5
K 0.45
A
0.8
D 0.85
G 1.25
L
1.6
N
1.9
Y 2.0max
M
2.5
❺Dimension tolerance［mm］
L
W
T
Standard
Standard
Standard
0.6±0.05
0.3±0.05
0.3±0.05
1.0±0.1
0.5±0.1
0.5±0.1
1.6＋0.15/－0.05 0.8＋0.15/－0.05 0.8＋0.15/－0.05
0.45±0.05
2.0＋0.15/－0.05 1.25＋0.15/－0.05
0.85±0.1
1.25＋0.15/－0.05
0.85±0.1
3.2±0.2
1.6±0.2
1.6±0.2
3.2±0.3
2.5±0.3
2.5±0.3
1.0＋0.15/－0.05 0.5＋0.15/－0.05 0.5＋0.15/－0.05
0.45±0.05
1.6＋0.2/－0
0.8＋0.2/－0
0.8＋0.2/－0
0.85±0.1
2.0＋0.2/－0
1.25＋0.2/－0
1.25＋0.2/－0
△＝Blank space
❿
⓫
❿Special
code
⓬Internal code
△ Standard
△＝Blank space
－ Standard
F
W
T
P
⓬
⓫Packaging
φ178mm Taping
（2mm pitch）
φ178mm Taping
（1mm pitch, 042
Type）
φ178mm Taping
（4mm pitch）
All types
φ178mm Taping
（4mm pitch,
1000pcs/reel）
1210Type　Thickness：M
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Type
□MK042
（01005 inch）
□MK063
（0201 inch）
□MK105
（0402 inch）
L
W
0.4±0.02
0.2±0.02
0.6±0.03
0.3±0.03
1.0±0.05
0.5±0.05
□MK107
（0603 inch）
1.6±0.10
0.8±0.10
□MK212
（0805 inch）
2.0±0.10
1.25±0.10
□MK316
（1206 inch）
3.2±0.15
1.6±0.15
□MK325
（1210 inch）
3.2±0.30
2.5±0.20
Dimension [mm]
T
0.2±0.02
e
Standard quantity [pcs]
Paper tape Embossed tape
－
C
0.1±0.03
0.3±0.03
P
0.15±0.05
15000
－
0.2±0.02
0.3±0.03
0.5±0.05
0.45±0.05
0.8±0.10
0.45±0.05
0.85±0.10
1.25±0.10
0.85±0.10
1.25±0.10
1.6±0.20
0.85±0.10
1.9±0.20
1.9＋0.1/－0.2
2.5±0.20
C
P
V
K
A
K
D
G
D
G
L
D
N
Y
M
0.25±0.10
20000
15000
10000
－
－
－
0.35±0.25
4000
—
0.5±0.25
0.5＋0.35/－0.25
0.6±0.3
40000
4000
—
—
4000
3000
—
3000
2000
—
2000
—
（P）
500
（T）, 1000
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
4
12
mlcc01_e-01
■ AVAILABLE CAPACITANCE RANGE
●Multilayer Ceramic Capacitors　Type
Cap
［pF］
X7R
063
B/X5R
X7R
10 6.3 4
25 16 25 16 10 6.3 4
C
C
C
C
C
C
C
C
C
C
C
C
C
P
P
P
P
P
P
P
C
C
C
C
C
C
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
C
P
P
P
P
P
P
C
C
P
105
B/X5R
X7R
P
P
P
P
P
P
F/Y5V
50 25 16 10 6.3 50 35 25 16 10 6.3 4
50 25 16 10 6.3
V
V
V
V
V
V
V
V
V
V
V
V
P
P
P
P
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
CAPACITORS
VDC
10
〔3-digit〕
C
100
101
C
150
151
C
220
221
C
330
331
C
470
471
C
680
681
C
1000
102
1500
152
2200
222
3300
332
4700
472
6800
682
10000
103
15000
153
22000
223
33000
333
47000
473
68000
683
100000
104
220000
224
330000
334
470000
474
1000000
105
2200000
225
3300000
335
4700000
475
042
B/X5R
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
Note：Letters in the table indicate product thickness.　■■ X5R only
107
Type
Cap
X7R
B/X5R
〔μF〕 VDC 50 25 16 10 6.3 50 35 25 16 10
〔3-digit〕
0.1
104
0.15 154
0.22 224 A
A A A
A A A
0.33 334
0.47 474 A A A A A A
A A A
0.68 684
1
105 A A A A A A A A A A
2.2 225
A
A A A
3.3 335
4.7
475
A A
6.8 685
10
106
A
22
226
47
476
100 107
212
316
325
F/Y5V
X7R
B/X5R
F/Y5V
X7R
B/X5R
F/Y5V
X7R
B/X5R
F/Y5V
6.3 4 50 25 16 10 50 35 25 16 10 6.3 50 25 16 10 6.3 50 16 10 6.3 50 25 16 10 6.3 50 25 16 10 6.3 4 35 25 16 10 50 25 16 10 6.3 50 35 25 16 10 6.3 16 10 6.3
A
A
G
G
A
G
G
A A
G
G
G
G
G
A A G G G G G
A A G
G G G
A
G G G
G G G
A A
A
L
G G G
L
L L
L L L L
G
G G G G
G
G G G G
G G
G
G G
L L
L
L
L L
N
N
M.N N N
L L L
L L L L
L
N
M.N N N N
L L L L
L L L
M M.N N N
M N M.N N N
L L L
L
M M
M M.Y Y N N
M.Y M M.N
N
L L
M M
L L
M M.Y
Note：Letters in the table indicate product thickness.　■■ X5R only
●Low Profile Multilayer Ceramic Capacitors
Type
Cap
［pF］
105
B/X5R
VDC
25 16 10 6.3
〔3-digit〕
100
101
150
151
220
221
330
331
470
471
680
681
1000
102
1500
152
2200
222
3300
332
4700
472
6800
682
P
10000
103
15000
153
22000
223
33000
333
47000
473
68000
683
P
C
100000
104
P
C
220000
224
330000
334
P
P
C
470000
474
P
1000000
105
2200000
225
3300000
335
4700000
475
Temp.char.Code
BJ
B7
F
107
212
Type
B/X5R
X7R
B/X5R
F/Y5V
X7R
Cap
〔μF〕 VDC 25 16 10 6.3 50 25 16 10 50 25 16 10 6.3 50 10 6.3 50 25 10 50
〔3-digit〕
0.1 104
D
0.22 224
D
D
0.33 334
0.47 474
D
D
D
0.68 684
1
105 K K K K D
D D D D D D
D
2.2 225
K K
D D D
D D D
D
D
D
3.3 335
D
D
D
4.7 475
K K
D
D D D. K D.K
6.8 685
10
106
D D D.K
D
226
D
22
47
476
Note：Letters in the table indicate product thickness.　■■ X5R only
Applicable standard
JIS
EIA
EIA
JIS
EIA
B
X5R
X7R
F
Y5V
Temperature characteristics
Temperature range
〔℃〕
－25～＋85
－55～＋85
－55～＋125
－25～＋85
－30～＋85
316
325
B/X5R
F/Y5V
B/X5R
25 16 10 6.3 35 25 16 10 6.3 25 16 10
D
D D
G
D
D
D D D
G D
D D D D
D D D
D
Ref. Temp.
〔℃〕
20
25
25
20
25
D D D D
D D
D
D
Capacitance change
〔％〕
±10
±15
±15
＋30/－80
＋22/－82
Capacitance tolerance
〔％〕
±10（K）
±20（M）
＋80（Z）
－20
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
12
5
■ REPRESENTATIVE PART NUMBERS
●042TYPE
（01005 case size）
【Temperature Characteristic BJ:B/X5R】
・0.2mm thickness
（C）
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
HALT
% Rated
voltage
5
0.2±0.02
R
200%
5
0.2±0.02
R
200%
5
0.2±0.02
R
200%
±10, ±20
5
0.2±0.02
R
200%
470
±10, ±20
5
0.2±0.02
R
200%
B/X5R*1
680
±10, ±20
5
0.2±0.02
R
200%
LMK042 BJ102□C
B/X5R*1
1000
±10, ±20
5
0.2±0.02
R
200%
LMK042 BJ152□C
X5R
1500
±10, ±20
10
0.2±0.02
R
150%
LMK042 BJ222□C
X5R
2200
±10, ±20
10
0.2±0.02
R
150%
LMK042 BJ332□C
X5R
3300
±10, ±20
10
0.2±0.02
R
150%
LMK042 BJ472□C
X5R
4700
±10, ±20
10
0.2±0.02
R
150%
LMK042 BJ682□C
X5R
6800
±10, ±20
10
0.2±0.02
R
150%
LMK042 BJ103□C
X5R
10000
±10, ±20
10
0.2±0.02
R
150%
Rated
voltage
Part number 1
10V
LMK042 BJ101□C
B/X5R*1
100
±10, ±20
LMK042 BJ151□C
B/X5R*1
150
±10, ±20
LMK042 BJ221□C
B/X5R*
1
220
±10, ±20
LMK042 BJ331□C
B/X5R*1
330
LMK042 BJ471□C
B/X5R*1
LMK042 BJ681□C
6.3V
4V
Part number 2
Capacitance
〔pF〕
Temp.
char.
Capacitance
tolerance
tanδ
〔%〕
JMK042 BJ152□C
B/X5R*1
1500
±10, ±20
10
0.2±0.02
R
150%
JMK042 BJ222□C
B/X5R*1
2200
±10, ±20
10
0.2±0.02
R
150%
JMK042 BJ332□C
B/X5R*1
3300
±10, ±20
10
0.2±0.02
R
150%
JMK042 BJ472□C
B/X5R*
1
4700
±10, ±20
10
0.2±0.02
R
150%
JMK042 BJ682□C
B/X5R*1
6800
±10, ±20
10
0.2±0.02
R
150%
JMK042 BJ103□C
B/X5R*1
10000
±10, ±20
10
0.2±0.02
R
150%
JMK042 BJ223□C
X5R
22000
±10, ±20
10
0.2±0.02
R
150%
AMK042 BJ473MC
X5R
AMK042 BJ104MC
X5R
47000
100000
±20
±20
10
10
0.2±0.02
0.2±0.02
R
R
150%
150%
Internal
code
（P/N 1）
Note
Internal
code
（P/N 1）
Note
Internal
code
（P/N 1）
Note
Capacitance tolerance code is applied to □ of part number.　*1 We may provide X7S/X7R for some items according to the individual specification.
【Temperature Characteristic B7：X7R】
・0.2mm thickness
（C）
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
HALT
% Rated
voltage
LMK042 B7101□C
X7R
100
±10, ±20
5
0.2±0.02
R
200%
LMK042 B7151□C
X7R
150
±10, ±20
5
0.2±0.02
R
200%
LMK042 B7221□C
X7R
220
±10, ±20
5
0.2±0.02
R
200%
LMK042 B7331□C
X7R
330
±10, ±20
5
0.2±0.02
R
200%
LMK042 B7471□C
X7R
470
±10, ±20
5
0.2±0.02
R
200%
LMK042 B7681□C
X7R
680
±10, ±20
5
0.2±0.02
R
200%
LMK042 B7102□C
X7R
1000
±10, ±20
5
0.2±0.02
R
200%
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
HALT
% Rated
voltage
Rated
voltage
Part number 1
10V
Part number 2
Capacitance tolerance code is applied to □ of part number.
●063TYPE
（0201 case size）
・0.3mm thickness
（P）
【Temperature Characteristic BJ:B/X5R】
Rated
voltage
25V
16V
10V
6.3V
4V
Part number 1
Part number 2
Temp.
char.
TMK063 BJ101□P
B/X5R*
1
100
±10, ±20
3.5
0.3±0.03
R
200%
TMK063 BJ151□P
B/X5R*1
150
±10, ±20
3.5
0.3±0.03
R
200%
TMK063 BJ221□P
B/X5R*1
220
±10, ±20
3.5
0.3±0.03
R
200%
TMK063 BJ331□P
B/X5R*1
330
±10, ±20
3.5
0.3±0.03
R
200%
TMK063 BJ471□P
B/X5R*1
470
±10, ±20
3.5
0.3±0.03
R
200%
TMK063 BJ681□P
B/X5R*
1
TMK063 BJ102□P
TMK063 BJ152□P
TMK063 BJ222□P
B/X5R*
B/X5R
B/X5R
1
680
1000
1500
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
5
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
200%
200%
200%
TMK063 BJ332□P
TMK063 BJ472□P
TMK063 BJ682□P
B/X5R
B/X5R
B/X5R
2200
3300
4700
±10, ±20
±10, ±20
±10, ±20
5
5
5
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
200%
200%
200%
TMK063 BJ103□P
EMK063 BJ152□P
B/X5R
B/X5R*1
6800
10000
±10, ±20
±10, ±20
5
5
0.3±0.03
0.3±0.03
R
R
200%
200%
EMK063 BJ222□P
EMK063 BJ332□P
B/X5R*1
B/X5R*1
1500
2200
±10, ±20
±10, ±20
5
5
0.3±0.03
0.3±0.03
R
R
200%
200%
EMK063 BJ472□P
EMK063 BJ682□P
EMK063 BJ103□P
B/X5R*1
B/X5R*1
B/X5R*1
3300
4700
6800
±10, ±20
±10, ±20
±10, ±20
5
5
5
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
200%
200%
200%
EMK063 BJ104□P
LMK063 BJ223□P
X5R
B/X5R
10000
100000
±10, ±20
±10, ±20
5
10
0.3±0.03
0.3±0.03
R
R
200%
150%
LMK063 BJ333□P
LMK063 BJ473□P
LMK063 BJ683□P
X5R
X5R
X5R
22000
33000
47000
±10, ±20
±10, ±20
±10, ±20
7.5
7.5
7.5
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
150%
150%
150%
LMK063 BJ104□P
LMK063 BJ224□P
JMK063 BJ223□P
X5R
X5R
B/X5R
68000
100000
220000
±10, ±20
±10, ±20
±10, ±20
10
10
10
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
150%
150%
150%
JMK063 BJ333□P
JMK063 BJ473□P
JMK063 BJ683□P
X5R
X5R
X5R
22000
33000
47000
±10, ±20
±10, ±20
±10, ±20
7.5
7.5
7.5
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
200%
150%
150%
JMK063 BJ104□P
JMK063 BJ224□P
X5R
X5R
68000
100000
±10, ±20
±10, ±20
10
10
0.3±0.03
0.3±0.03
R
R
150%
150%
AMK063 BJ224□P
X5R
220000
220000
±10, ±20
±10, ±20
10
10
0.3±0.03
0.3±0.03
R
R
150%
150%
AMK063 BJ334MP
X5R
330000
±20
10
0.3±0.03
R
150%
AMK063 BJ474MP
X5R
470000
±20
10
0.3±0.03
R
150%
*2
AMK063ABJ105MP
X5R
1000000
±20
10
0.3±0.05
R
150%
Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some items according to the individual specification. *2 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
6
12
mlcc01_e-01
■ REPRESENTATIVE PART NUMBERS
【Temperature Characteristic B7：X7R】
・0.3mm thickness
（P）
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
HALT
% Rated
voltage
100
±10, ±20
3.5
0.3±0.03
R
200%
150
±10, ±20
3.5
0.3±0.03
R
200%
X7R
220
±10, ±20
3.5
0.3±0.03
R
200%
TMK063 B7331□P
X7R
330
±10, ±20
3.5
0.3±0.03
R
200%
TMK063 B7471□P
X7R
470
±10, ±20
3.5
0.3±0.03
R
200%
TMK063 B7681□P
X7R
680
±10, ±20
3.5
0.3±0.03
R
200%
TMK063 B7102□P
X7R
1000
±10, ±20
3.5
0.3±0.03
R
200%
EMK063 B7152□P
X7R
1500
±10, ±20
5
0.3±0.03
R
200%
EMK063 B7222□P
X7R
2200
±10, ±20
5
0.3±0.03
R
200%
EMK063 B7332□P
X7R
3300
±10, ±20
5
0.3±0.03
R
200%
EMK063 B7472□P
X7R
4700
±10, ±20
5
0.3±0.03
R
200%
EMK063 B7682□P
X7R
6800
±10, ±20
5
0.3±0.03
R
200%
EMK063 B7103□P
X7R
10000
±10, ±20
5
0.3±0.03
R
200%
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
HALT
% Rated
voltage
Part number 1
25V
16V
Temp.
char.
Capacitance
〔pF〕
TMK063 B7101□P
X7R
TMK063 B7151□P
X7R
TMK063 B7221□P
Part number 2
Internal
code
（P/N 1）
Note
Internal
code
（P/N 1）
Note
CAPACITORS
Capacitance
tolerance
Rated
voltage
Capacitance tolerance code is applied to □ of part number.
●105TYPE
（0402 case size）
【Temperature Characteristic BJ:B/X5R】
・0.5mm thickness
（V）
Rated
voltage
50V
35V
25V
16V
10V
6.3V
Part number 1
Part number 2
UMK105 BJ221□V
B/X5R*
1
220
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 BJ331□V
B/X5R*1
330
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 BJ471□V
B/X5R*1
470
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 BJ681□V
B/X5R*1
680
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 BJ102□V
B/X5R*1
1000
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 BJ152□V
B/X5R*1
1500
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 BJ222□V
B/X5R*
1
2200
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 BJ332□V
B/X5R*1
3300
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 BJ472□V
B/X5R*1
4700
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 BJ682□V
B/X5R*1
UMK105 BJ103□V
GMK105 BJ104□V
B/X5R*
B/X5R
1
6800
10000
100000
±10, ±20
±10, ±20
±10, ±20
2.5
3.5
5
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
150%
200%
150%
TMK105 BJ153□V
TMK105 BJ223□V
TMK105 BJ333□V
TMK105 BJ473□V
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
15000
22000
33000
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
200%
200%
150%
TMK105 BJ104□V
TMK105 BJ105□V
B/X5R
X5R
47000
100000
±10, ±20
±10, ±20
3.5
5
0.5±0.05
0.5±0.05
R
R
150%
150%
EMK105 BJ153□V
EMK105 BJ223□V
EMK105 BJ333□V
B/X5R*1
B/X5R*1
B/X5R*1
1000000
15000
22000
±10, ±20
±10, ±20
±10, ±20
10
3.5
3.5
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
150%
200%
200%
EMK105 BJ473□V
EMK105 BJ683□V
B/X5R*1
B/X5R
33000
47000
±10, ±20
±10, ±20
3.5
3.5
0.5±0.05
0.5±0.05
R
R
200%
200%
EMK105 BJ104□V
EMK105 BJ224□V
EMK105 BJ105□V
LMK105 BJ104□V
B/X5R*1
B/X5R
X5R
B/X5R
68000
100000
220000
1000000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
5
5
5
10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
200%
150%
150%
150%
LMK105 BJ224□V
LMK105 BJ474□V
B/X5R
X5R
100000
220000
±10, ±20
±10, ±20
5
5
0.5±0.05
0.5±0.05
R
R
200%
150%
LMK105 BJ105□V
LMK105 BJ225MV
JMK105 BJ224□V
X5R
X5R
B/X5R
470000
1000000
2200000
±10, ±20
±10, ±20
±20
10
10
10
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
150%
150%
150%
JMK105 BJ474□V
JMK105 BJ105□V
X5R
X5R
220000
470000
1000000
±10, ±20
±10, ±20
±10, ±20
5
10
10
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
150%
150%
150%
150%
JMK105 BJ225MV
JMK105 BJ475MV
4V
JMK105BBJ475MV
AMK105 BJ335MV
AMK105 BJ475MV
AMK105ABJ475MV
X5R
2200000
±20
10
0.5±0.05
R
X5R
4700000
±20
10
0.5＋0.15/－0.05
R
150%
X5R
3300000
±20
10
0.5±0.05
R
150%
X5R
4700000
±20
10
0.5±0.1
R
150%
D
*2
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some items according to the individual specification.
*2 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
12
7
■ REPRESENTATIVE PART NUMBERS
（P）
・0.3mm thickness
Rated
voltage
Part number 1
25V
TMK105 BJ103□P
TMK105 BJ104□P
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
HALT
% Rated
voltage
5
0.3±0.03
R
150%
10
0.3±0.03
R
150%
10
0.3±0.03
R
150%
±10, ±20
10
0.3±0.03
R
150%
470000
±10, ±20
10
0.3±0.03
R
150%
X5R
1000000
±10, ±20
10
0.3±0.03
R
150%
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
HALT
% Rated
voltage
Capacitance
〔pF〕
Capacitance
tolerance
B/X5R
10000
±10, ±20
X5R
100000
±10, ±20
TMK105 BJ224□P
X5R
220000
±10, ±20
TMK105 BJ474□P
X5R
470000
16V
EMK105 BJ474□P
X5R
6.3V
JMK105 BJ105□P
Part number 2
Temp.
char.
tanδ
〔%〕
Internal
code
（P/N 1）
Note
Internal
code
（P/N 1）
Note
Internal
code
（P/N 1）
Note
・0.2mm thickness
（C）
Rated
voltage
Part number 1
10V
LMK105 BJ104□C
X5R
100000
±10, ±20
10
0.2±0.02
R
150%
6.3V
JMK105 BJ224□C
X5R
220000
±10, ±20
10
0.2±0.02
R
150%
JMK105 BJ474□C
X5R
470000
±10, ±20
10
0.2±0.02
R
150%
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
HALT
% Rated
voltage
Part number 2
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic B7:X7R】
・0.5mm thickness
（V）
Rated
voltage
50V
25V
16V
10V
Part number 1
Part number 2
UMK105 B7221□V
X7R
220
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 B7331□V
X7R
330
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 B7471□V
X7R
470
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 B7681□V
X7R
680
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 B7102□V
X7R
1000
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 B7152□V
X7R
1500
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 B7222□V
X7R
2200
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 B7332□V
X7R
3300
±10, ±20
2.5
0.5±0.05
R
200%
UMK105 B7472□V
X7R
4700
±10, ±20
2.5
0.5±0.05
R
150%
UMK105 B7682□V
X7R
UMK105 B7103□V
TMK105 B7152□V
X7R
X7R
6800
10000
±10, ±20
±10, ±20
2.5
3.5
0.5±0.05
0.5±0.05
R
R
150%
150%
TMK105 B7222□V
TMK105 B7332□V
TMK105 B7472□V
X7R
X7R
X7R
1500
2200
3300
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
200%
200%
200%
TMK105 B7682□V
TMK105 B7103□V
TMK105 B7224□V
X7R
X7R
X7R
4700
6800
10000
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
3.5
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
200%
200%
200%
EMK105 B7223□V
EMK105 B7473□V
EMK105 B7104□V
X7R
X7R
X7R
220000
22000
47000
±10, ±20
±10, ±20
±10, ±20
10
3.5
3.5
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
150%
200%
200%
EMK105 B7224□V
LMK105 B7223□V
X7R
X7R
100000
220000
±10, ±20
±10, ±20
5
10
0.5±0.05
0.5±0.05
R
R
150%
150%
LMK105 B7473□V
LMK105 B7104□V
X7R
X7R
22000
47000
±10, ±20
±10, ±20
3.5
3.5
0.5±0.05
0.5±0.05
R
R
200%
200%
X7R
X7R
X7R
100000
220000
470000
220000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
5
10
10
5
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
150%
150%
150%
150%
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
HALT
% Rated
voltage
LMK105 B7224□V
LMK105 B7474□V
6.3V
JMK105 B7224□V
Capacitance tolerance code is applied to □ of part number.
R
R
R
【Temperature Characteristic F:Y5V】
・0.5mm thickness
（V）
Rated
voltage
Part number 1
50V
UMK105 F103ZV
F/Y5V
10000
＋80/－20
5
0.5±0.05
R
200%
25V
TMK105 F223ZV
F/Y5V
22000
＋80/－20
5
0.5±0.05
R
200%
16V
Part number 2
EMK105 F473ZV
F/Y5V
47000
＋80/－20
7
0.5±0.05
R
200%
EMK105 F104ZV
F/Y5V
100000
＋80/－20
9
0.5±0.05
R
200%
10V
LMK105 F224ZV
F/Y5V
220000
＋80/－20
11
0.5±0.05
R
200%
6.3V
JMK105 F474ZV
F/Y5V
470000
＋80/－20
12.5
0.5±0.05
R
200%
JMK105 F105ZV
F/Y5V
1000000
＋80/－20
20
0.5±0.05
R
150%
Internal
code
（P/N 1）
Note
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
8
12
mlcc01_e-01
■ REPRESENTATIVE PART NUMBERS
●107TYPE
【Temperature Characteristic BJ:B/X5R】
・0.8mm thickness
（A）
Rated
voltage
50V
35V
25V
16V
6.3V
4V
Part number 2
UMK107 BJ474□A
UMK107 BJ105□A
GMK107 BJ105□A
TMK107 BJ224□A
TMK107 BJ474□A
TMK107 BJ105□A
TMK107 BJ225□A
EMK107 BJ224□A
EMK107 BJ474□A
EMK107 BJ105□A
EMK107 BJ225□A
EMK107 BJ475□A
LMK107 BJ224□A
LMK107 BJ474□A
LMK107 BJ105□A
LMK107 BJ225□A
LMK107 BJ475□A
LMK107 BJ106MA
JMK107 BJ225□A
JMK107 BJ475□A
JMK107 BJ106MA
AMK107 BJ106MA
AMK107 BJ226MA
UMK107ABJ474□A
TMK107ABJ225□A
EMK107ABJ475□A
LMK107BBJ106MA
JMK107ABJ106MA
AMK107BBJ226MA
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R
B/X5R
B/X5R
B/X5R
B/X5R
X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
X5R
X5R
B/X5R
X5R
X5R
X5R
X5R
0.47
1
1
0.22
0.47
1
2.2
0.22
0.47
1
2.2
4.7
0.22
0.47
1
2.2
4.7
10
2.2
4.7
10
10
22
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±20
±20
±20
10
10
5
3.5
3.5
5
10
3.5
3.5
5
10
10
3.5
3.5
5
10
10
10
10
10
10
10
10
0.8＋0.15/－0.05
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8＋0.15/－0.05
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8＋0.15/－0.05
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8＋0.2/－0
0.8±0.1
0.8±0.1
0.8＋0.15/－0.05
0.8±0.1
0.8＋0.2/－0
R
R
R
R/W
R
R
R
R/W
R
R
R
R
R/W
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R
B/X5R
X5R
X5R
B/X5R
X5R
X5R
1
1
1
2.2
4.7
1
2.2
4.7
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±20
10
10
10
10
10
10
10
10
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
150%
150%
150%
200%
150%
150%
150%
200%
200%
150%
150%
150%
200%
200%
200%
150%
150%
150%
150%
150%
150%
150%
150%
Internal
code
（P/N 1）
D
Special code：L
HALT
% Rated
voltage
150%
150%
150%
150%
150%
150%
150%
150%
Internal
code
（P/N 1）
Note
D
Special code：L
HALT
% Rated
voltage
150%
150%
150%
150%
150%
150%
150%
150%
200%
200%
150%
150%
200%
200%
150%
Internal
code
（P/N 1）
Note
Note
D
D
CAPACITORS
10V
Part number 1
D
・0.45mm thickness
（K）
Rated
voltage
25V
16V
10V
6.3V
Part number 1
TMK107 BJ105□K
EMK107 BJ105□K
LMK107 BJ105□K
LMK107 BJ225□K
LMK107 BJ475MK
JMK107 BJ105□K
JMK107 BJ225□K
JMK107 BJ475MK
Part number 2
LMK107BBJ475MK
Capacitance tolerance code is applied to □ of part number.
*1　We may provide X7R for some itemes according to the individual specification.
【Temperature Characteristic B7：X7R】
・0.8mm thickness
（A）
Rated
voltage
Part number 1
50V
UMK107 B7224□A
UMK107 B7474□A
25V
TMK107 B7474□A
TMK107 B7105□A
EMK107 B7224□A
EMK107 B7474□A
EMK107 B7105□A
LMK107 B7224□A
LMK107 B7474□A
LMK107 B7105□A
LMK107 B7225□A
JMK107 B7224□A
JMK107 B7474□A
JMK107 B7105□A
Part number 2
UMK107AB7105□A
16V
10V
6.3V
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.22
0.47
1
0.47
1
0.22
0.47
1
0.22
0.47
1
2.2
0.22
0.47
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
10
10
10
10
10
3.5
3.5
5
3.5
3.5
5
10
3.5
3.5
5
0.8±0.1
0.8±0.1
0.8＋0.15/－0.05
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R
R
R
R
R
R/W
R
R
R/W
R
R
R
R/W
R
R
R
R
R
Capacitance tolerance code is applied to □ of part number.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
12
9
■ REPRESENTATIVE PART NUMBERS
【Temperature Characteristic F：Y5V】
・0.8mm thickness
（A）
Rated
voltage
50V
25V
16V
10V
Part number 1
UMK107
TMK107
EMK107
EMK107
EMK107
EMK107
LMK107
LMK107
Part number 2
F104ZA
F474ZA
F224ZA
F474ZA
F105ZA
F225ZA
F105ZA
F225ZA
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
0.1
0.47
0.22
0.47
1
2.2
1
2.2
＋80/－20
＋80/－20
＋80/－20
＋80/－20
＋80/－20
＋80/－20
＋80/－20
＋80/－20
7
7
7
7
16
16
16
16
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R/W
R/W
R/W
R/W
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
B/X5R
X5R
X5R
B/X5R*1
B/X5R*1
X5R
B/X5R*1
B/X5R*1
X5R
X5R
B/X5R
X5R*1
X5R
X5R
0.1
0.22
0.47
1
2.2
4.7
10
2.2
4.7
10
2.2
4.7
10
22
4.7
10
22
47
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±20
±20
3.5
3.5
3.5
5
5
10
10
5
5
10
5
5
10
10
5
10
10
10
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25＋0.15/－0.05
1.25＋0.2/－0
1.25±0.1
1.25＋0.15/－0.05
1.25＋0.15/－0.05
1.25±0.1
1.25＋0.15/－0.05
1.25＋0.15/－0.05
1.25＋0.2/－0
1.25＋0.15/－0.05
1.25＋0.15/－0.05
1.25＋0.15/－0.05
1.25＋0.2/－0
R/W
R/W
R/W
R/W
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
B/X5R
B/X5R
B/X5R
X5R
B/X5R*1
B/X5R*1
B/X5R
X5R
B/X5R*1
B/X5R*1
B/X5R
X5R
X5R
X5R
X5R
1
0.47
1
2.2
4.7
1
2.2
4.7
10
1
2.2
4.7
10
4.7
10
22
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
3.5
5
5
10
5
5
10
10
3.5
5
10
10
10
10
10
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
（P/N 1）
Note
HALT
% Rated
voltage
200%
150%
150%
150%
150%
150%
150%
200%
150%
150%
200%
200%
200%
150%
200%
200%
150%
150%
Internal
code
（P/N 1）
Note
HALT
% Rated
voltage
150%
200%
200%
150%
150%
200%
200%
150%
150%
200%
200%
200%
150%
200%
200%
150%
Internal
code
（P/N 1）
Note
HALT
% Rated
voltage
150%
150%
150%
Internal
code
（P/N 1）
●212TYPE
【Temperature Characteristic BJ：B/X5R】
・1.25mm thickness
（G）
Rated
voltage
50V
25V
16V
10V
6.3V
Part number 1
UMK212 BJ104□G
UMK212 BJ224□G
UMK212 BJ474□G
UMK212 BJ105□G
TMK212 BJ225□G
TMK212 BJ475□G
EMK212 BJ225□G
EMK212 BJ475□G
EMK212 BJ106□G
LMK212 BJ225□G
LMK212 BJ475□G
LMK212 BJ106□G
LMK212 BJ226MG
JMK212 BJ475□G
JMK212 BJ106□G
JMK212 BJ226MG
JMK212 BJ476MG
Part number 2
TMK212ABJ475□G
TMK212BBJ106MG
EMK212ABJ475□G
EMK212ABJ106□G
LMK212ABJ475□G
LMK212ABJ106□G
LMK212BBJ226MG
JMK212ABJ475□G
JMK212ABJ106□G
JMK212ABJ226MG
JMK212BBJ476MG
・0.85mm thickness
（D）
Rated
voltage
50V
25V
16V
10V
6.3V
Part number 1
Part number 2
UMK212 BJ105□D
TMK212 BJ474□D
TMK212 BJ105□D
TMK212 BJ225□D
TMK212 BJ475□D
EMK212 BJ105□D
EMK212 BJ225□D
EMK212 BJ475□D
EMK212 BJ106□D
LMK212 BJ105□D
LMK212 BJ225□D
LMK212 BJ475□D
LMK212 BJ106□D
JMK212 BJ475□D
JMK212 BJ106□D
JMK212 BJ226MD
UMK212ABJ105□D
TMK212ABJ225□D
TMK212BBJ475□D
EMK212ABJ225□D
EMK212ABJ106□D
LMK212ABJ106□D
JMK212ABJ106□D
JMK212ABJ226MD
D
D
D
・0.45mm thickness
（K）
Rated
voltage
10V
6.3V
Part number 1
Part number 2
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
LMK212 BJ475□K
JMK212 BJ475□K
JMK212 BJ106MK
LMK212ABJ475□K
JMK212ABJ475□K
JMK212ABJ106MK
X5R
X5R
X5R
4.7
4.7
10
±10, ±20
±10, ±20
±20
10
10
10
0.45±0.05
0.45±0.05
0.45±0.05
R
R
R
Note
Capacitance tolerance code is applied to □ of part number.
*1　We may provide X7R for some itemes according to the individual specification.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
10
12
mlcc01_e-01
■ REPRESENTATIVE PART NUMBERS
【Temperature Characteristic B7：X7R】
・1.25mm thickness
（G）
Rated
voltage
Part number 1
UMK212 B7104□G
UMK212 B7224□G
UMK212 B7474□G
UMK212 B7105□G
35V
25V
GMK212 B7105□G
TMK212 B7105□G
TMK212 B7225□G
TMK212 B7475□G
EMK212 B7105□G
EMK212 B7225□G
EMK212 B7475□G
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.1
0.22
0.47
1
2.2
1
1
2.2
4.7
1
2.2
4.7
10
1
2.2
4.7
10
10
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
3.5
3.5
3.5
10
10
3.5
3.5
10
10
3.5
10
10
10
3.5
5
10
10
10
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25＋0.2/－0
1.25±0.1
1.25±0.1
1.25±0.1
1.25＋0.15/－0.05
1.25±0.1
1.25±0.1
1.25±0.1
1.25＋0.2/－0
1.25±0.1
1.25±0.1
1.25±0.1
1.25＋0.15/－0.05
1.25＋0.15/－0.05
R/W
R/W
R/W
R/W
R
R/W
R/W
R
R
R/W
R
R
R
R/W
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.1
0.22
0.47
1
2.2
0.47
1
2.2
1
2.2
4.7
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
10
10
10
10
10
3.5
5
5
3.5
5
10
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
R/W
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
0.47
1
2.2
4.7
10
10
＋80/－20
＋80/－20
＋80/－20
＋80/－20
＋80/－20
＋80/－20
7
7
7
9
16
16
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
R/W
R/W
R/W
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
F/Y5V
0.22
2.2
4.7
＋80/－20
＋80/－20
＋80/－20
7
9
16
0.85±0.1
0.85±0.1
0.85±0.1
R/W
R
R
Part number 2
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
EMK316ABJ226ML
B/X5R*1
X5R
B/X5R*1
B/X5R
X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R
B/X5R*1
B/X5R
X5R
B/X5R*1
B/X5R
X5R
X5R
X5R
1
4.7
2.2
4.7
10
2.2
4.7
10
22
10
22
47
10
22
47
100
100
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±20
±20
±10, ±20
±10, ±20
±20
±20
±20
3.5
10
3.5
5
5
3.5
5
5
10
5
10
10
5
10
10
10
10
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R
R
R
R
R
R/W
R
R
R
R
R
R
R
R
R
R
R
UMK212BB7225□G
16V
TMK212AB7475□G
EMK212BB7106MG
10V
6.3V
LMK212 B7105□G
LMK212 B7225□G
LMK212 B7475□G
LMK212 B7106MG
JMK212 B7106□G
LMK212AB7106MG
JMK212AB7106□G
HALT
% Rated
voltage
200%
150%
150%
150%
150%
150%
150%
150%
150%
200%
150%
150%
150%
200%
200%
150%
150%
150%
Internal
code
（P/N 1）
HALT
% Rated
voltage
150%
150%
150%
150%
150%
200%
200%
150%
200%
200%
150%
Internal
code
（P/N 1）
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
Internal
code
（P/N 1）
Note
HALT
% Rated
voltage
200%
200%
200%
Internal
code
（P/N 1）
Note
HALT
% Rated
voltage
200%
150%
200%
150%
150%
200%
200%
150%
150%
200%
150%
150%
200%
200%
200%
150%
150%
Internal
code
（P/N 1）
Note
Note
R
D
CAPACITORS
50V
Temp.
char.
Part number 2
D
・0.85mm thickness
（D）
Rated
voltage
Part number 1
50V
25V
16V
10V
Part number 2
UMK212AB7104□D
UMK212AB7224□D
UMK212AB7474□D
UMK212AB7105□D
TMK212AB7225□D
EMK212 B7474□D
EMK212 B7105□D
EMK212 B7225□D
LMK212 B7105□D
LMK212 B7225□D
LMK212 B7475□D
EMK212AB7225□D
LMK212AB7225□D
LMK212AB7475□D
Note
R
R
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic F：Y5V】
・1.25mm thickness
（G）
Rated
voltage
Part number 1
50V
UMK212
UMK212
EMK212
LMK212
LMK212
JMK212
16V
10V
6.3V
Part number 2
F474ZG
F105ZG
F225ZG
F475ZG
F106ZG
F106ZG
・0.85mm thickness
（D）
Rated
voltage
Part number 1
50V
10V
6.3V
UMK212 F224ZD
LMK212 F225ZD
JMK212 F475ZD
Part number 2
●316Type
【Temperature Characteristic BJ：B/X5R】
・1.6mm thickness
（L）
Rated
voltage
50V
25V
16V
10V
6.3V
4V
Part number 1
UMK316 BJ105□L
UMK316 BJ475□L
TMK316 BJ225□L
TMK316 BJ475□L
TMK316 BJ106□L
EMK316 BJ225□L
EMK316 BJ475□L
EMK316 BJ106□L
EMK316 BJ226ML
LMK316 BJ106□L
LMK316 BJ226ML
LMK316 BJ476ML
JMK316 BJ106□L
JMK316 BJ226□L
JMK316 BJ476ML
JMK316 BJ107ML
AMK316 BJ107ML
LMK316ABJ226ML
LMK316ABJ476ML
JMK316ABJ226□L
JMK316ABJ476ML
JMK316ABJ107ML
AMK316ABJ107ML
Capacitance tolerance code is applied to □ of part number.
*1　We may provide X7R for some itemes according to the individual specification.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
12
11
■ REPRESENTATIVE PART NUMBERS
・0.85mm thickness
（D）
Rated
voltage
50V
25V
16V
10V
6.3V
Part number 1
UMK316 BJ105□D
UMK316 BJ225□D
UMK316 BJ475□D
TMK316 BJ105□D
TMK316 BJ225□D
TMK316 BJ475□D
TMK316 BJ106□D
EMK316 BJ225□D
EMK316 BJ475□D
EMK316 BJ106□D
EMK316 BJ226MD
LMK316 BJ475□D
LMK316 BJ106□D
LMK316 BJ226MD
JMK316 BJ106□D
JMK316 BJ226MD
JMK316 BJ476MD
Part number 2
UMK316ABJ475□D
TMK316ABJ106□D
EMK316ABJ226MD
LMK316ABJ226MD
JMK316ABJ226MD
JMK316ABJ476MD
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R
B/X5R
X5R
B/X5R
B/X5R
X5R
X5R
B/X5R
B/X5R
X5R
X5R
B/X5R
B/X5R
X5R
B/X5R
X5R
X5R
1
2.2
4.7
1
2.2
4.7
10
2.2
4.7
10
22
4.7
10
22
10
22
47
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±20
±10, ±20
±20
±20
3.5
3.5
10
3.5
3.5
5
10
3.5
5
10
10
5
10
10
10
10
10
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.22
0.47
1
2.2
4.7
1
2.2
4.7
10
2.2
10
2.2
4.7
10
22
10
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
2.5
3.5
3.5
10
10
3.5
3.5
10
10
3.5
10
3.5
5
10
10
5
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R/W
R/W
R
R
R
R/W
R
R
R
R/W
R
R/W
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
2.2
4.7
10
±10, ±20
±10, ±20
±20
10
10
10
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
F/Y5V
F/Y5V
10
10
10
22
＋80/－20
＋80/－20
＋80/－20
＋80/－20
9
9
9
16
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
2.2
4.7
＋80/－20
＋80/－20
7
7
1.25±0.1
1.25±0.1
R/W
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
4.7
10
＋80/－20
＋80/－20
9
16
0.85±0.1
0.85±0.1
R
R
HALT
% Rated
voltage
150%
150%
150%
200%
150%
150%
150%
200%
200%
150%
150%
200%
200%
150%
200%
150%
150%
Internal
code
（P/N 1）
HALT
% Rated
voltage
200%
200%
200%
150%
150%
200%
200%
200%
150%
200%
200%
200%
200%
200%
150%
200%
Internal
code
（P/N 1）
HALT
% Rated
voltage
150%
150%
150%
Internal
code
（P/N 1）
Note
HALT
% Rated
voltage
200%
200%
200%
200%
Internal
code
（P/N 1）
Note
HALT
% Rated
voltage
200%
200%
Internal
code
（P/N 1）
Note
HALT
% Rated
voltage
200%
200%
Internal
code
（P/N 1）
Note
Note
D
D
D
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic B7：X7R】
・1.6mm thickness
（L）
Rated
voltage
50V
25V
16V
10V
6.3V
Part number 1
UMK316 B7224□L
UMK316 B7474□L
UMK316 B7105□L
UMK316 B7225□L
UMK316 B7475□L
TMK316 B7105□L
TMK316 B7225□L
TMK316 B7475□L
TMK316 B7106□L
EMK316 B7225□L
EMK316 B7106□L
LMK316 B7225□L
LMK316 B7475□L
LMK316 B7106□L
LMK316 B7226ML
JMK316 B7106□L
Part number 2
UMK316AB7475□L
TMK316AB7475□L
TMK316AB7106□L
EMK316AB7106□L
LMK316AB7106□L
LMK316AB7226ML
Note
D
D
D
D
D
R
Capacitance tolerance code is applied to □ of part number.
・0.85mm thickness
（D）
Rated
voltage
50V
25V
10V
Part number 1
Part number 2
UMK316 B7225□D
TMK316AB7475□D
LMK316AB7106MD
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic F：F/Y5V】
・1.6mm thickness
（L）
Rated
voltage
35V
25V
16V
10V
Part number 1
GMK316
TMK316
EMK316
LMK316
Part number 2
F106ZL
F106ZL
F106ZL
F226ZL
・1.25mm thickness
（G）
Rated
voltage
Part number 1
50V
35V
UMK316 F225ZG
GMK316 F475ZG
Part number 2
・0.85mm thickness
（D）
Rated
voltage
Part number 1
10V
6.3V
LMK316 F475ZD
JMK316 F106ZD
Part number 2
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
12
12
mlcc01_e-01
■ REPRESENTATIVE PART NUMBERS
●325Type
【Temperature Characteristic BJ：B/X5R】
・2.5mm thickness
（M）
Rated
voltage
50V
25V
16V
10V
UMK325 BJ475MM
UMK325 BJ106MM
TMK325 BJ106MM
EMK325 BJ226MM
EMK325 BJ476MM
LMK325 BJ226MM
LMK325 BJ476MM
LMK325 BJ107MM
JMK325 BJ476MM
JMK325 BJ107MM
Part number 2
LMK325ABJ107MM
JMK325ABJ107MM
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R
B/X5R*1
B/X5R
X5R
B/X5R
X5R
X5R
X5R
X5R
4.7
10
10
22
47
22
47
100
47
100
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
5
3.5
5
10
5
10
10
10
10
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.3
2.5±0.2
2.5±0.3
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
B/X5R
X5R
B/X5R
B/X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R
X5R
B/X5R
B/X5R*1
B/X5R
X5R
X5R
4.7
2.2
4.7
10
3.3
4.7
10
4.7
10
47
22
10
22
100
47
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
10
3.5
10
5
3.5
3.5
5
3.5
3.5
10
5
3.5
5
10
10
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9＋0.1/－0.2
1.9＋0.1/－0.2
1.9±0.2
1.9＋0.1/－0.2
1.9＋0.1/－0.2
1.9±0.2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R
B/X5R
B/X5R
B/X5R
B/X5R
B/X5R
10
10
22
3.3
4.7
10
±20
±20
±20
±20
±20
±20
5
5
10
3.5
5
5
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
R
HALT
% Rated
voltage
150%
150%
150%
150%
150%
200%
150%
150%
150%
150%
Internal
code
（P/N 1）
Note
HALT
% Rated
voltage
150%
200%
150%
150%
200%
200%
200%
200%
200%
150%
150%
200%
200%
150%
150%
Internal
code
（P/N 1）
Note
HALT
% Rated
voltage
150%
150%
150%
200%
200%
150%
Internal
code
（P/N 1）
Note
HALT
% Rated
voltage
150%
150%
150%
150%
150%
150%
200%
Internal
code
（P/N 1）
Note
HALT
% Rated
voltage
150%
200%
150%
150%
200%
150%
200%
Internal
code
（P/N 1）
HALT
% Rated
voltage
200%
200%
200%
Internal
code
（P/N 1）
・1.9mm thickness
（Y, N）
Rated
voltage
50V
35V
25V
16V
10V
6.3V
Part number 1
Part number 2
UMK325 BJ475MN
GMK325 BJ225MN
GMK325 BJ475MN
GMK325 BJ106MN
TMK325 BJ335MN
TMK325 BJ475MN
TMK325 BJ106MN
EMK325 BJ475MN
EMK325 BJ106MN
EMK325 BJ476MY
LMK325 BJ226MY
LMK325 BJ106MN
JMK325 BJ226MY
JMK325 BJ107MY
JMK325 BJ476MN
CAPACITORS
6.3V
Part number 1
・0.85mm thickness
（D）
Rated
voltage
25V
16V
10V
Part number 1
Part number 2
TMK325 BJ106MD
EMK325 BJ106MD
EMK325 BJ226MD
LMK325 BJ335MD
LMK325 BJ475MD
LMK325 BJ106MD
*1　We may provide X7R for some itemes according to the individual specification.
【Temperature Characteristic B7：X7R】
・2.5mm thickness
（M）
Rated
voltage
Part number 1
50V
UMK325 B7475MM
Part number 2
UMK325AB7106MM
25V
TMK325 B7226MM
TMK325AB7106MM
16V
10V
6.3V
EMK325 B7226MM
LMK325 B7476MM
JMK325 B7476MM
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
4.7
10
22
10
22
47
47
±20
±20
±20
±20%
±20
±20
±20
5
10
10
10
10
10
10
2.5±0.2
2.5±0.3
2.5±0.2
2.5±0.3
2.5±0.2
2.5±0.2
2.5±0.2
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
4.7
3.3
4.7
10
4.7
10
10
±20
±20
±20
±20
±20
±20
±20
10
3.5
3.5
10
3.5
3.5
3.5
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
F/Y5V
22
22
47
＋80/－20
＋80/－20
＋80/－20
16
16
16
1.9±0.2
1.9±0.2
1.9±0.2
R
R
R
R
R
R
R
・1.9mm thickness
（N）
Rated
voltage
50V
25V
16V
10V
Part number 1
Part number 2
UMK325 B7475MN
TMK325 B7335MN
TMK325 B7475MN
TMK325 B7106MN
EMK325 B7475MN
EMK325 B7106MN
LMK325 B7106MN
Note
R
R
【Temperature Characteristic F：F/Y5V】
・1.9mm thickness
（N）
Rated
voltage
Part number 1
16V
10V
6.3V
EMK325 F226ZN
LMK325 F226ZN
JMK325 F476ZN
Part number 2
Note
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
12
13
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
■ Taiyo Yuden multilayer ceramic capacitor
TMK107 BJ105KA
JMK107ABJ106MA
JMK107 BJ106MA
JMK212ABJ226MG
JMK212 BJ226MG
TMK316 BJ106KL
JMK316ABJ476ML
JMK316 BJ476ML
JMK316ABJ107ML
JMK316 BJ107ML
GMK325 BJ106MN
EMK325 BJ476MY
JMK325 BJ107MY
UMK107 F104ZA
LMK107 F105ZA
LMK107 F225ZA
UMK212 F224ZD
UMK212 F105ZG
LMK212 F106ZG
UMK316 F225ZG
GMK316 F106ZL
LMK316 F226ZL
AMK107BBJ226MA
AMK107 BJ226MA
TMK212BBJ106MG
JMK325 F476ZN
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
14
12
mlcc01_e-01
CAPACITORS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
12
15
■ PACKAGING
①Minimum Quantity
◦Taped package
Thickness
Type
□MK042
□MK063
□2K096
□WK105
□MK105
□VK105
□MK107
□WK107
□2K110
□MK212
□WK212
□4K212
□2K212
□MK316
□MK325
□MK432
mm
code
0.2
0.3
0.3
0.45
0.3
0.2
0.3
0.5
0.5
0.45
0.5
0.8
0.5
0.6
0.8
0.45
0.85
1.25
0.85
0.85
0.85
1.15
1.25
1.6
0.85
1.15
1.9
2.0max
2.5
2.5
C,D
P,T
P
K
P
C
P
V, W
W
K
V
A
V
B
A
K
D
G
D
D
D
F
G
L
D
F
N
Y
M
M
Standard quantity [pcs]
Embossed
tape
—
40000
15000
③Representative taping dimensions
◦Paper Tape（8mm wide）
◦Pressed carrier tape（2mm pitch）
㧗0.1/−0
Paper tape
10000
20000
15000
—
T1
10000
4000
—
4000
Unit：mm
4000
—
—
3000
4000
—
Type
※No bottom tape for pressed carrier tape
Insertion Pitch
Ｆ
□MK063
□2K096
□WK105
MK105
（*1C）
0.65
1.15
MK105
（*1P）
1
* Thickness, C：0.2mm、P：0.3mm
Tape Thickness
Ｔ
T1
0.45max.
0.42max.
0.4max.
0.45max.
0.3max.
0.42max.
2.0±0.05
◦Punched carrier tape（2mm pitch）
㧗0.1/−0
—
3000
2000
—
—
500（T）, 1000（P）
500
Unit：mm
Type
②Taping material
Chip Cavity
Ａ
Ｂ
0.37
0.67
0.65
1.02
□2K096
□MK105
□VK105
Chip Cavity
A
B
0.72
1.02
0.65
Insertion Pitch
F
Tape Thickness
T
0.6max.
52.0±0.05
1.15
0.8max.
◦Paper tape
◦Punched carrier tape（4mm pitch）
㧗0.1/−0
Unit：mm
◦Embossed tape
Type
□MK107
□WK107
□2K110
□MK212
□WK212
□4K212
□2K212
□MK316
Chip Cavity
A
B
Insertion Pitch
F
Tape Thickness
T
1.0
1.8
1.1max.
1.15
1.55
1.0max.
1.65
2.4
2.0
3.6
4.0±0.1
1.1max.
◦Chip filled
Note：Taping size might be different depending on the size of the product.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_pack-P1
12
mlcc_pack_e-01
■ PACKAGING
◦Embossed tape（4mm wide）
④Trailer and Leader
0.8±0.04
4.0±0.05
1.8±0.02
0.9±0.05
100mm or more
Trailer 160mm min.
Leader 400mm min.
Ｆ
1.0±0.02
2.0±0.04
Unit：mm
Type
□MK042
Chip Cavity
A
B
0.23
0.43
Insertion Pitch
F
1.0±0.02
Tape Thickness
K
T
0.5max.
0.25max.
⑤Reel size
t
E
C
◦Embossed tape（8mm wide）
㧗0.1/−0
A
B
D
R
W
Unit：mm
A
φ178±2.0
B
φ50min.
C
φ13.0±0.2
D
φ21.0±0.8
E
2.0±0.5
R
1.0
4mm wide tape
8mm wide tape
12mm wide tape
t
1.5max.
2.5max.
2.5max.
W
5±1.0
10±1.5
14±1.5
Unit：mm
Type
□WK107
□MK212
□MK316
□MK325
Chip Cavity
A
B
1.0
1.8
1.65
2.4
2.0
3.6
2.8
3.6
Insertion Pitch
F
4.0±0.1
Tape Thickness
K
T
1.3max
0.25±0.1
3.4max.
0.6max.
◦Embossed tape（12mm wide）
⑥Top Tape Strength
㧗0.1/−0
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow
as illustrated below.
2.0±0.1
F
Type
□MK432
Chip Cavity
A
B
3.7
4.9
Unit：mm
Insertion Pitch
F
8.0±0.1
Tape Thickness
K
T
4.0max.
0.6max.
⑦Bulk Cassette
The exchange of individual specification is necessary.
Please contact Taiyo Yuden sales channels.
12±0.1
36＋0/−0.2
110±0.7
8.8±0.1
2.0＋0/−0.1
1.5＋0.1/−0
6.8±0.1
12.0±0.1
＋0/−0.2
＋0.2/−0
1.0＋0/−0.1
Unit：mm
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_pack_e-01
12
mlcc_pack-P2
■ RELIABILITY DATA
Super Low Distortion Multilayer Ceramic Capacitors and Medium-High
Voltage Multilayer Ceramic Capacitors are noted separately.
Multilayer Ceramic Capacitors
1.Operating Temperature Range
Temperature Compensating
（Class 1）
Specified
Value
Standard
High Frequency Type
－55 to ＋125℃
BJ
B7
C6
C7
High Permittivity（Class 2）
F
Specification
B
X5R
X7R
X6S
X7S
F
Y5V
Temperature Range
－25 to ＋85℃
－55 to ＋85℃
－55 to ＋125℃
－55 to ＋105℃
－55 to ＋125℃
－25 to ＋85℃
－30 to ＋85℃
2. Storage Conditions
Temperature Compensating
（Class 1）
Specified
Value
Standard
High Frequency Type
－55 to ＋125℃
BJ
B7
C6
C7
High Permittivity（Class 2）
F
Specification
B
X5R
X7R
X6S
X7S
F
Y5V
Temperature Range
－25 to ＋85℃
－55 to ＋85℃
－55 to ＋125℃
－55 to ＋105℃
－55 to ＋125℃
－25 to ＋85℃
－30 to ＋85℃
3. Rated Voltage
Temperature Compensating
Specified（Class 1）
Value
High Permittivity（Class 2）
Standard
High Frequency Type
4. Withstanding Voltage
（Between terminals）
Standard
Temperature Compensating
Specified（Class 1）
High Frequency Type
Value
High Permittivity
（Class 2）
【Test Methods and Remarks】
Applied voltage
Duration
Charge/discharge current
50VDC, 25VDC, 16VDC
50VDC, 16VDC
50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC
No breakdown or damage
Class 1
Class 2
Rated voltage×3 Rated voltage×2.5
1 to 5 sec.
50mA max.
5. Insulation Resistance
Standard
Temperature Compensating
High Frequency Type
Specified（Class 1）
Value
High Permittivity（Class 2）Note 1
10000 MΩ min.
C≦0.047μF : 10000 MΩ min.
C＞0.047μF : 500MΩ・μF
【Test Methods and Remarks】
Applied voltage: Rated voltage
Duration: 60±5 sec.
Charge/discharge current: 50mA max.
6. Capacitance（Tolerance）
Standard
Temperature Compensating
Specified（Class 1）
Value
High Frequency Type
High Permittivity（Class 2）
【Test Methods and Remarks】
Standard
Preconditioning
Measuring frequency
Measuring voltage Note 1
Bias application
C△
U△
0.5pF≦C≦5pF：±0.25pF
0.5pF<C≦10pF：±0.5pF
C＞10pF：±5%
CH
RH
0.5pF≦C≦2pF：±0.1pF
C＞2pF：±5%
RH
S△
T△
0.5pF≦C≦2pF：±0.1pF
C＞2pF：±5%
BJ, B7, C6,C7：±10％ or ±20％, F：－20％／＋80％
Class 1
Class 2
High Frequency Type
C≦10μF
C＞10μF
None
Thermal treatment（at 150℃ for 1hr） Note 2
1ＭHz±10％
1ｋHz±10％
120±10Hz
0.5 to 5Vrms
1±0.2Vrms
0.5±0.1Vrms
None
7. Q or Dissipation Factor
Standard
Temperature Compensating
Specified（Class 1）
High Frequency Type
Value
High Permittivity
（Class 2）Note 1
【Test Methods and Remarks】
C＜30 pF：Q≧400＋20C、C≧30 pF：Q≧1000　（C：Nominal capacitance）
Refer to detailed specification
BJ, B7, C6,C7：2.5％ max.,　F：7％ max.
Class 1
Class 2
High Frequency Type
C≦10μF
C＞10μF
None
Thermal treatment（at 150℃ for 1hr） Note 2
1ＭHz±10％
1GHz
1ｋHz±10％
120±10Hz
0.5 to 5Vrms
1±0.2Vrms
0.5±0.1Vrms
None
Standard
Preconditioning
Measuring frequency
Measuring voltage Note 1
Bias application
High Frequency Type
Measuring equipment: HP4291A
Measuring jig: HP16192A
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli-R1
12
mlcc_reli_e-01
■ RELIABILITY DATA
8. Temperature Characteristic
（Without voltage application）
Standard
Temperature Compensating
（Class 1）
High Frequency Type
Temperature Characteristic［ppm/℃］
C□ ：0
CH, CJ, CK
R□ ：ー220 RH
S□ ：ー330 SH, SJ, SK
T□ ：ー470 TJ, TK
U□ ：ー750 UJ, UK
SL ：＋350 to －1000
Specified
Value
BJ
B7
C6
C7
High Permittivity（Class 2）
F
Specification
B
X5R
X7R
X6S
X7S
F
Y5V
Tolerance
H±60
J±120
K±250
Capacitance change
±10％
±15％
±15％
±22％
±22％
＋30/ー80％
＋22/ー82％
Reference temperature
20℃
25℃
25℃
25℃
25℃
20℃
25℃
Temperature Range
－25 to ＋85℃
－55 to ＋85℃
－55 to ＋125℃
－55 to ＋105℃
－55 to ＋125℃
－25 to ＋85℃
－30 to ＋85℃
【Test Methods and Remarks】
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.
（C85－C20）
6
× 10（ppm/℃）
C20×△T　△T＝65
Class 2
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.
（C－C2）
×100
（％）
B、F
X5R、X7R、X6S、X7S、Y5V
C2
Minimum operating temperature
C ：Capacitance in Step 1 or Step 3
20℃
25℃
C2 ：Capacitance in Step 2
Maximum operating temperature
Step
1
2
3
9. Deflection
Standard
Temperature Compensating
Specified（Class 1）
Value
High Frequency Type
High Permittivity（Class 2）
Appearance :
Capacitance change :
Appearance :
Capacitance change :
Appearance :
Capacitance change :
No abnormality
Within ±5% or ±0.5 pF, whichever is larger.
No abnormality
Within±0.5 pF
No abnormality
Within ±12.5%
（BJ, B7, C6, C7）
, Within ±30%
（F）
【Test Methods and Remarks】
Multilayer Ceramic Capacitors
Board
042、063 Type
The other types
glass epoxy-resin substrate
Thickness
0.8mm
1.6mm
Warp
Duration
1mm
10 sec.
Thickness
1.6mm
Warp
1mm
Duration
10 sec.
Board
Warp
Array Type
096、110、212 Type
Board
glass epoxy-resin substrate
Capacitance measurement shall
be conducted with the board bent
10. Body Strength
Standard
High Frequency Type
Temperature Compensating
Specified（Class 1）
Value
High Permittivity（Class 2）
【Test Methods and Remarks】
High Frequency Type
Applied force: 5N
Duration: 10 sec.
—
No mechanical damage.
—
A
A
A
11. Adhesive Strength of Terminal Electrodes
Standard
Temperature Compensating
Specified（Class 1）
High Frequency Type
Value
High Permittivity（Class 2）
【Test Methods and Remarks】
Multilayer Ceramic Capacitors
042、063 Type
105 Type or more
Applied force
2N
5N
No terminal separation or its indication.
Array Type
Duration
30±5 sec.
096 Type
110、212 Type
Applied force
2N
5N
Duration
30±5 sec.
12. Solderability
Standard
Temperature Compensating
Specified（Class 1）
At least 95% of terminal electrode is covered by new solder.
High Frequency Type
Value
High Permittivity（Class 2）
【Test Methods and Remarks】
Solder type
Solder temperature
Duration
Eutectic solder
H60A or H63A
230±5℃
4±1 sec.
Lead-free solder
Sn-3.0Ag－0.5Cu
245±3℃
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
12
mlcc_reli-R2
■ RELIABILITY DATA
13. Resistance to Soldering
Standard
Temperature Compensating
（Class 1）
High Frequency Type
Specified
Value
High Permittivity（Class 2）
Note 1
Appearance:
No abnormality
Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger.
Q:
Initial value
Insulation resistance: Initial value
Withstanding voltage（between terminals）
: No abnormality
Appearance:
No abnormality
Capacitance change: Within ±2.5%
Q:
Initial value
Insulation resistance: Initial value
Withstanding voltage（between terminals）
: No abnormality
Appearance:
No abnormality
Capacitance change: Within ±7.5%（BJ, B7, C6, C7）
Within ±20%（F）
Dissipation factor:
Initial value
Insulation resistance: Initial value
Withstanding voltage（between terminals）
: No abnormality
【Test Methods and Remarks】
Class 1
Class 2
105 Type
Array
（096, 110 Type）
None
150℃, 1 to 2 min.
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
270±5℃
3±0.5 sec.
6 to 24 hrs（Standard condition） Note 5
042, 063 Type
Preconditioning
Preheating
Solder temp.
Duration
Recovery
105, 107, 212 Type
316, 325 Type
Array
（096, 110,212 Type）
Thermal treatment（at 150℃ for 1 hr）Note 2
150℃, 1 to 2 min.
80 to 100℃, 2 to 5 min. 80 to 100℃, 5 to 10 min.
150 to 200℃, 2 to 5 min. 150 to 200℃, 5 to 10 min.
270±5℃
3±0.5 sec.
24±2 hrs（Standard condition） Note 5
042、063 Type
Preconditioning
Preheating
Solder temp.
Duration
Recovery
14. Temperature Cycle (Thermal Shock）
Standard
Temperature Compensating
（Class 1）
High Frequency Type
Specified
Value
High Permittivity（Class 2）
Note 1
Appearance:
No abnormality
Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger.
Q:
Initial value
Insulation resistance: Initial value
Withstanding voltage（between terminals）
: No abnormality
Appearance:
No abnormality
Capacitance change: Within ±0.25pF
Q:
Initial value
Insulation resistance: Initial value
Withstanding voltage（between terminals）
: No abnormality
Appearance:
No abnormality
Capacitance change: Within ±7.5%（BJ, B7, C6, C7）
Within ±20%（F）
Dissipation factor:
Initial value
Insulation resistance: Initial value
Withstanding voltage（between terminals）
: No abnormality
【Test Methods and Remarks】
Class 1
None
Preconditioning
Step
1
2
3
4
1 cycle
Number of cycles
Recovery
Class 2
Thermal treatment（at 150℃ for 1 hr） Note 2
Temperature
（℃）
Lowest operating temperature ＋0/－3
Normal temperature
Highest operating temperature ＋0/－3
Normal temperature
Time
（min.）
30±3
2 to 3
30±3
2 to 3
5 times
6 to 24 hrs（Standard condition） Note 5
24±2 hrs（Standard condition） Note 5
15. Humidity（Steady State）
Standard
Temperature Compensating
（Class 1）
Specified
Value
High Frequency Type
High Permittivity（Class 2）
Note 1
Appearance:
No abnormality
Capacitance change: Within ±5% or ±0.5pF, whichever is larger.
Q：
C＜10pF：
Q≧200＋10C　10≦C＜30pF： Q≧275＋2.5C
C≧30pF：
Q≧350
（C：Nominal capacitance）
Insulation resistance: 1000 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±0.5pF,
Insulation resistance: 1000 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%
（BJ, B7, C6, C7）
Within ±30%
（F）
Dissipation factor：
5.0% max.（BJ, B7, C6, C7）
11.0% max.
（F）
Insulation resistance: 50 MΩμF or 1000 MΩ whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
Preconditioning
Temperature
Humidity
Duration
Recovery
High Frequency Type
None
40±2℃
60±2℃
90 to 95％RH
500＋24/ー0 hrs
6 to 24 hrs（Standard condition） Note 5
Preconditioning
Temperature
Humidity
Duration
Recovery
All items
Thermal treatment（at 150℃ for 1 hr）　Note 2
40±2℃
90 to 95％RH
500＋24/ー0 hrs
24±2 hrs（Standard condition） Note 5
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli-R3
12
mlcc_reli_e-01
■ RELIABILITY DATA
16. Humidity Loading
Standard
Temperature Compensating
（Class 1）
High Frequency Type
Specified
Value
High Permittivity（Class 2）
Note 1
Appearance:
No abnormality
Capacitance change: Within ±7.5% or ±0.75pF, whichever is larger.
Q：
C＜30pF：Q≧100＋10C/3
C≧30pF：Q≧200
（C：Nominal capacitance）
Insulation resistance: 500 MΩ min.
Appearance:
No abnormality
Capacitance change: C≦2pF：Within ±0.4 pF
C＞2pF：Within ±0.75 pF
（C：Nominal capacitance）
Insulation resistance: 500 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%（BJ, B7, C6, C7）
Within ±30%
（F）
Dissipation factor：
5.0% max.（BJ, B7, C6, C7）
11.0% max.
（F）
Insulation resistance: 25 MΩμF or 500 MΩ, whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
Preconditioning
Temperature
Humidity
Duration
Applied voltage
Charge/discharge current
Recovery
High Frequency Type
None
40±2℃
60±2℃
90 to 95％RH
500＋24/ー0 hrs
Rated voltage
50mA max.
6 to 24 hrs（Standard condition） Note 5
Preconditioning
Temperature
Humidity
Duration
Applied voltage
Charge/discharge current
Recovery
All items
Voltage treatment
（Rated voltage are applied for 1 hour at 40℃） Note 3
40±2℃
90 to 95％RH
500＋24/ー0 hrs
Rated voltage
50mA max.
24±2 hrs（Standard condition） Note 5
17. High Temperature Loading
Standard
Temperature Compensating
（Class 1）
Specified
Value
High Frequency Type
High Permittivity（Class 2）
Note 1
Appearance:
No abnormality
Capacitance change: Within ±3% or ±0.3pF, whichever is larger.
Q：
C＜10pF：
Q≧200＋10C
10≦C＜30pF： Q≧275＋2.5C
C≧30pF：
Q≧350（C：Nominal capacitance）
Insulation resistance: 1000 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±3% or ±0.3pF, whichever is larger.
Insulation resistance: 1000 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%
（BJ, B7, C6, C7）
Within ±30%
（F）
Dissipation factor：
5.0% max.
（BJ, B7, C6, C7）
11.0% max.
（F）
Insulation resistance: 50 MΩμF or 1000 MΩ, whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
Preconditioning
Temperature
Duration
Applied voltage
Charge/discharge current
Recovery
Note 1
Note 2
Note 3
Note 4
Note 5
High Frequency Type
None
125±3℃
1000＋48/ー0 hrs
Rated voltage×2
50mA max.
6 to 24hr（Standard condition） Note 5
Preconditioning
Temperature
Duration
Applied voltage
Charge/discharge current
Recovery
BJ, F
C6
B7, C7
Voltage treatment（Twice the rated voltage shall be
applied for 1 hour at 85℃, 105℃ or 125℃） Note 3, 4
85±2℃
105±3℃
125±3℃
1000＋48/ー0 hrs
Rated voltage×2　Note 4
50mA max.
24±2 hrs（Standard condition） Note 5
The figures indicate typical specifications. Please refer to individual specifications in detail.
Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for 24±2hours.
Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and
kept at room temperature for 24±2hours.
150% of rated voltage is applicable to some items. Please refer to their specifications for further information.
Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
12
mlcc_reli-R4
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
1. Circuit Design
◆Verification of operating environment, electrical rating and performance
1. A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have severe social ramifications.
Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from them used in general purpose applications.
◆Operating Voltage（Verification of Rated voltage）
Precautions
1. The operating voltage for capacitors must always be their rated voltage or less.
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.
For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.
2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC voltage or a pulse voltage
having rapid rise time is used in a circuit.
2. PCB Design
◆Pattern configurations（Design of Land-patterns）
1. When capacitors are mounted on PCBs, the amount of solder used（size of fillet）can directly affect the capacitor performance. Therefore, the following items must
be carefully considered in the design of land patterns:
（1）
Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider appropriate land-patterns for proper
amount of solder.
Precautions
（2）
When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by solder-resist.
◆Pattern configurations
（Capacitor layout on PCBs）
After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes（PCB cutting, board inspection,
mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.）
. For this reason, land pattern configurations and positions of capacitors
shall be carefully considered to minimize stresses.
◆Pattern configurations（Design of Land-patterns）
The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.
（1）
Recommended land dimensions for typical chip capacitors
●Multilayer Ceramic Capacitors : Recommended land dimensions（unit: mm）
Wave-soldering
Land patterns for PCBs
Type
Size
L
W
A
B
C
Land
107
212
316
325
1.6
2.0
3.2
3.2
0.8
51.25
1.6
2.5
0.8 to 1.0 1.0 to 1.4 1.8 to 2.5 1.8 to 2.5
0.5 to 0.8 0.8 to 1.5 0.8 to 1.7 0.8 to 1.7
0.6 to 0.8 0.9 to 1.2 1.2 to 1.6 1.8 to 2.5
Chip capacitor
C
B
Reflow-soldering
Type
Size
L
W
A
B
C
042
063
105
107
0.4
0.6
1.0
1.6
0.2
0.3
0.5
0.8
0.15 to 0.25 0.20 to 0.30 0.45 to 0.55 0.8 to 1.0
0.15 to 0.20 0.20 to 0.30 0.40 to 0.50 0.6 to 0.8
0.15 to 0.30 0.25 to 0.40 0.45 to 0.55 0.6 to 0.8
212
2.0
51.25
0.8 to 1.2
0.8 to 1.2
0.9 to 1.6
316
3.2
1.6
1.8 to 2.5
1.0 to 1.5
1.2 to 2.0
325
3.2
2.5
1.8 to 2.5
1.0 to 1.5
1.8 to 3.2
432
4.5
3.2
2.5 to 3.5
1.5 to 1.8
2.3 to 3.5
Chip capacitor
W
L
●LWDC: Recommended land dimensions for reflow-soldering（unit: mm）
Type
Technical
considerations
105
0.52
1.0
0.18 to 0.22
0.2 to 0.25
0.9 to 1.1
L
W
A
B
C
107
50.8
1.6
0.25 to 0.3
0.3 to 0.4
1.5 to 1.7
LWDC
212
1.25
2.0
0.5 to 0.7
0.4 to 0.5
1.9 to 2.1
W
L
●Array type: Recommended land dimensions for reflow-soldering（unit: mm）
Type
Size
a
b
c
d
L
W
B
A
Note：Recommended land size might be different according to the allowance of the size of the product.
Size
Solder-resist
2 circuits
096（2 circuits） 110（2 circuits） 212（2 circuits） 212
（4 circuits）
0.9
1.37
2.0
2.0
0.6
1.0
1.25
1.25
0.25 to 0.35
0.35 to 0.45
0.5 to 0.6
0.5 to 0.6
0.15 to 0.25
0.55 to 0.65
0.5 to 0.6
0.5 to 0.6
0.15 to 0.25
0.3 to 0.4
0.5 to 0.6
0.2 to 0.3
0.45
0.64
1.0
0.5
4 circuits
Chip capacitor
c
c
a
b
a
Land
d
a
b
a
d
（2）
Examples of good and bad solder application
Items
Not recommended
Recommended
Mixed mounting of
SMD and leaded
components
Component
placement close to
the chassis
Hand-soldering
of leaded
components
near mounted
components
Horizontal
component
placement
To next page
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec-P1
12
mlcc_prec_e-01
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
2. PCB Design
◆Pattern configurations
（Capacitor layout on PCBs）
1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any possible mechanical stresses from board warp or deflection.
Items
Not recommended
Recommended
Deflection of board
Technical
considerations
1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below.
1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods are listed in order from
least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB, split methods as well as chip location.
3. Mounting
◆Adjustment of mounting machine
1. When capacitors are mounted on PCB, excessive impact load shall not be imposed on them.
2.Maintenance and inspection of mounting machines shall be conducted periodically.
Precautions ◆Selection of Adhesives
1. When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the following factors are appropriately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and hardening period. Therefore, please contact us for further
information.
◆Adjustment of mounting machine
1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid this, the following points
shall be considerable.
（1）The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection.
（2）The pressure of nozzle shall be adjusted between 1 and 3 N static loads.
（3）To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be used on the other side of the
PCB. The following diagrams show some typical examples of good and bad pick-up nozzle placement:
Items
Not recommended
Recommended
Single-sided
mounting
Double-sided
mounting
Technical
considerations
2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical impact on the capacitors.
To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of the pin shall be conducted
periodically.
◆Selection of Adhesives
Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in stresses on the capacitors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect components. Therefore, the following precautions
shall be noted in the application of adhesives.
（1）
Required adhesive characteristics
a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process.
b. The adhesive shall have sufficient strength at high temperatures.
c. The adhesive shall have good coating and thickness consistency.
d. The adhesive shall be used during its prescribed shelf life.
e. The adhesive shall harden rapidly.
f . The adhesive shall have corrosion resistance.
g. The adhesive shall have excellent insulation characteristics.
h. The adhesive shall have no emission of toxic gasses and no effect on the human body.
（2）
The recommended amount of adhesives is as follows;
［Recommended condition］
Figure
212/316 case sizes as examples
a
0.3mm min
b
100 to 120 μm
c
Adhesives shall not contact land
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec_e-01
12
mlcc_prec-P2
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
4. Soldering
◆Selection of Flux
Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;
（1）
Flux used shall be less than or equal to 0.1 wt%（in CI equivalent）of halogenated content. Flux having a strong acidity content shall not be applied.
（2）
When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level.
（3）
When water-soluble flux is used, special care shall be taken to properly clean the boards.
Precautions
◆Soldering
Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions.
Sn-Zn solder paste can adversely affect MLCC reliability.
Please contact us prior to usage of Sn-Zn solder.
◆Selection of Flux
1-1. When too much halogenated substance（Chlorine,
Chlorine, etc.）
）content is used to activate fl
flux,
ux, or highly acidic fl
flux
ux is used, it may lead to corrosion of terminal electrodes or degradation of insulation resistance on the surfaces of the capacitors.
1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted and may adversely affect
the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high humidity conditions may cause
a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning methods and the capability of the machines used shall also be
considered carefully when water-soluble flux is used.
Peak260℃
260℃Max.
Max.
Peak
230℃
Within10sec.
10sec.
Within
Within 10 sec.
Preheating
200 60sec.
200
200
Min.
60sec.
Min.
Slow
Slow
cooling
Slowcooling
cooling
300
100
100
100
Peak 260℃ Max.
Withinabove
10sec.
Heating
Preheating 150℃
230℃
200 60sec. Min.
40sec. Max.
0
Slow
cooling
300
100
Peak 260℃ Max.
230∼250℃
Within 10sec.
Heating
above
Heating
above
Within
3sec.
Preheating
Heating
above
Preheating 150℃
150℃
Preheating
230℃
230℃
Preheating
150℃
120sec. Min.
230℃
60sec. Min.
Min.
60sec.
40sec. Max.
Max.
40sec.
200
60sec. Min.
200
00
40sec.
Max.
Slow
0
0
Slow cooling
cooling
Caution
300
①The300
ideal condition is to have solder mass（fillet）controlled
to
1/2
to
1/3
of
the
thickness
of a capacitor.
300
100 excessive dwell times
100
230∼250℃
230∼250℃
②Because
can adversely affect solderability,
soldering duration230∼250℃
shall be kept as
Within
3sec.
Within
3sec.
close to recommended
timesHeating
as possible.
Preheating
Preheating
Within 3sec.
above
Preheating
Preheating
150℃
120sec.
Min.
120sec.
Min.
230℃
120sec. Min.
200
200
60sec. Min.
200
40sec. Max.
［Wave soldering］
0
0
Slow cooling
cooling
Slow
Slow cooling
【Recommended condition for Pb-free
soldering】
【Recommended conditions for eutectic soldering】
200
00
Preheating
120sec. Min.
300
100
200
Slow cooling
300
300
100
200
200
0
230∼250℃
Within 3sec.
Peak260℃
260℃Max.
Max.
Peak
Within10sec.
10sec.
Within
120sec. Min.
Min.
120sec.
Slow
Slow
cooling
Preheating cooling
Preheating
150℃
150℃
120sec. Min.
［Hand200
soldering］
00
120sec. Min.
0
300
100
200
0
Slow
Preheating cooling
150℃
Peak 260℃ Max.
Within 10sec.
120sec. Min.
Slow
100
300
230∼280℃
Within 3 sec.
②The soldering iron shall not directly touch capacitors.
0
Preheating
60sec. Min.
0
400
60sec. Min.
⊿T
Slow cooling
200
400
400
400
100
300
300
300
0
200
200
200
400
100
100
100
300
00
200
100
0
400
Peak 350℃ Max.
Within 3sec.
300
0
【Recommended condition for Pb-free soldering】
200
400
400
Slow cooling
400
Peak 350℃
350℃Max.
Max.
Peak
230∼280℃Within
Within 3sec.
3sec.
100
Within 3 sec.
300
300
300 Preheating
⊿T
⊿T
60sec. Min.
0
Slow cooling
cooling
Slow
0
200
200
200
200
200
Slow cooling
cooling
Slow
Preheating
Preheating
Slow cooling
400
400
150℃
Min.350℃ Max.
150℃
Min.
Peak
230∼280℃
100
100
100
100
Within
3sec.
100
Within 3 sec.
300 Preheating
300
Preheating
Preheating
⊿T
60sec.
Min.
60sec.
Min.
60sec. Min.
Min.
60sec.
60sec. Min.
00
00
0
Slow cooling
⊿T
200
200
Slow cooling
316type or less Preheating
⊿T≦150℃
Caution
150℃ Min.
①Use100
a 50W soldering iron with a maximum tip diameter of100
1.0 mm.
Slow
【Recommended conditions for eutectic soldering】
Preheating cooling
400
400
150℃
100
230∼280℃
230∼280℃
Within 33 sec.
sec.
Within
300
300
T
PC board
Peak 260℃ Max.
Within 10sec.
Caution
Preheating cooling
300
400 as for reflow soldering
①Wave
soldering must not be applied to capacitors designated
150℃ only.
100
100
Peak 260℃ Max.
Within 10sec.
Capacitor
Solder
Temperature（℃） Temperature
Temperature（℃）
（℃） Temperature（℃）
Temperature（℃）
300
100
100
Temperature（℃） Temperature
Temperature（℃）
（℃） Temperature（℃）
Temperature（℃）
Temperature（℃）
Temperature（℃）
Temperature（℃）
Temperature（℃）
Technical
considerations
300
100
0
Preheating
Peak 280℃
280℃Max.
Max.
Peak
150℃ Peak
Min. 350℃ Max.
Within 3sec.
3sec.
Within
Within 3sec.
⊿T Min.
60sec.
⊿T
⊿T
Temperature（℃）
Temperature（℃） Temperature
Temperature（℃）
（℃）Temperature（℃） Temperature
Temperature（℃）
（℃） Temperature（℃） Temperature
Temperature（℃）
（℃） Temperature（℃）
Temperature
（℃）
Temperature
（℃）
Temperature
（℃）
300
300
300
200
Slow
【Recommended condition for Pb-free cooling
soldering】
Slow cooling
cooling
Slow
Slow cooling
Preheating
Preheating
Preheating
150℃
Min.
150℃
Min.
Peak
280℃ Max.
150℃
Min.
Within 3sec.
60sec. Min.
Min.
60sec.
60sec. Min.
⊿T
Slow cooling
⊿T
325type or morePreheating
⊿T≦130℃
150℃ Min.
60sec. Min.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec-P3
12
mlcc_prec_e-01
300
⊿T
200
400
100
Temperature（℃）
【Recommended conditions for eutectic soldering】
Temperature（℃）
［Reflow soldering］
Temperature（℃）
◆Soldering
• Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling.
as to prevent malfunction of the components due to excessive thermal shock.
• Therefore, the soldering must be conducted with great care so300
Peak 260℃
• Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between
theMax.
capacitors and solder shall be within 100 to 130℃.
• Cooling : The temperature difference between the capacitors and cleaning process shall Within
not be10sec.
greater than 100℃.
300
60sec. M
0
200
⊿T
100
0
60sec.
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
5. Cleaning
Precautions
Technical
considerations
◆Cleaning conditions
1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use of the cleaning.（e.g. to
remove soldering flux or other materials from the production process.）
2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect capacitor's characteristics.
1. The use of inappropriate cleaning solutions can cause foreign substances such as flux residue to adhere to capacitors or deteriorate their outer coating, resulting in
a degradation of the capacitor's electrical properties（especially insulation resistance）
.
2. Inappropriate cleaning conditions（insufficient or excessive cleaning）may adversely affect the performance of the capacitors.
In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead to the cracking of capacitors or the soldered
portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall be carefully checked;
Ultrasonic output : 20 W/ℓ or less
Ultrasonic frequency : 40 kHz or less
Ultrasonic washing period : 5 min. or less
6. Resin coating and mold
1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while left under normal storage conditions resulting in the deterioration of the capacitor's performance.
2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat may lead to damage or
Precautions
destruction of capacitors.
The use of such resins, molding materials etc. is not recommended.
7. Handling
◆Splitting of PCB
1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board.
2. Board separation shall not be done manually, but by using the appropriate devices.
Precautions
◆Mechanical considerations
Be careful not to subject capacitors to excessive mechanical shocks.
（1）
If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used.
（2）
Please be careful that the mounted components do not come in contact with or bump against other boards or components.
8. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control temperature and humidity in
the storage area. Humidity should especially be kept as low as possible.
・Recommended conditions
Ambient temperature
: Below 30℃
Humidity
: Below 70% RH
Precautions
The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as time passes, so capacitors shall be used within 6 months from the time of delivery.
・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air.
2. The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time, ｓo care shall be taken to design circuits . Even if
capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at 150℃ for 1hour.
Technical If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and quality loss of taping/
consider- packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the above period, please check solderability beations
fore using the capacitors.
※RCR-2335B
（Safety Application Guide for fixed ceramic capacitors for use in electronic equipment）
is published by JEITA.
Please check the guide regarding precautions for deflection test, soldering by spot heat, and so on.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec_e-01
12
mlcc_prec-P4