AOZ8802A Ultra-Low Capacitance TVS Diode Array General Description Features The AOZ8802A is a transient voltage suppressor array designed to protect high speed data lines such as HDMI, MDDI, USB, SATA, and Gigabit Ethernet from damaging ESD events. z ESD protection for high-speed data lines: This device incorporates four surge rated, low capacitance steering diodes and a TVS in a single package. During transient conditions, the steering diodes direct the transient to either the positive side of the power supply line or to ground. The AOZ8802A provides a typical line to line capacitance of 0.3pF and low insertion loss up to 6GHz providing greater signal integrity making it ideally suited for HDMI 1.3 applications, such as Digital TVs, DVD players, set-top boxes and USB applications in mobile computing devices. The AOZ8802A comes in a RoHS compliant and Halogen Free 1.6mm x 1.0mm x 0.55mm DFN-6 package and is rated -40°C to +85°C junction temperature range. – IEC 61000-4-2, level 4 (ESD) immunity test – Air discharge: ±15kV; Contact discharge: ±15kV – IEC61000-4-4 (EFT) 40A (5/50nS) – IEC61000-4-5 (Lightning) 2.5A (8/20µS) – Human Body Model (HBM) ±24kV z Array of surge rated diodes with internal TVS diode z Small package saves board space z Protects two I/O lines z Low capacitance between I/O lines: 0.3pF z Low clamping voltage z Low operating voltage: 5.0V Applications z USB, MDDI, SATA ports z Monitors and flat panel displays z Set-top box z Video graphics cards z Digital Video Interface (DVI) z Notebook computers Typical Application Vbus +5V USB 2.0 Controller D+ D+ D- D- AOZ8802A USB 2.0 Port GND Figure 1. USB Port Rev. 1.0 October 2010 www.aosmd.com Page 1 of 9 AOZ8802A Ordering Information Part Number Ambient Temperature Range Package Environmental AOZ8802ADI -40°C to +85°C DFN-6 Green Product RoHS Compliant AOS Green Products use reduced levels of Halogens, and are also RoHS compliant. Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information. Pin Configuration CH1 1 6 NC CH2 2 5 NC VN 3 4 VN DFN-6 (Top View) Absolute Maximum Ratings Exceeding the Absolute Maximum ratings may damage the device. Parameter Rating Storage Temperature (TS) -65°C to +150°C ESD Rating per IEC61000-4-2, contact (1) ±15kV ESD Rating per IEC61000-4-2, air(1) ESD Rating per Human Body Model ±15kV (2) ±24kV Notes: 1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330Ω. 2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5kΩ. Maximum Operating Ratings Parameter Rating Junction Temperature (TJ) Rev. 1.0 October 2010 -40°C to +125°C www.aosmd.com Page 2 of 9 AOZ8802A Electrical Characteristics TA = 25°C unless otherwise specified. Symbol Parameter Diagram IPP Maximum Reverse Peak Pulse Current VCL Clamping Voltage @ IPP VRWM IR VBR IF Working Peak Reverse Voltage Maximum Reverse Leakage Current Breakdown Voltage IF Forward Current VF Forward Voltage PPK Peak Power Dissipation CJ I VCL VBR VRWM V IR VF IT IPP Max. Capacitance @ VR = 0 and f = 1MHz Specifications in BOLD indicate a temperature range of -40°C to +85°C. Symbol VRWM VBR Parameter Reverse Working Voltage Conditions VN(4) IT = 1mA, between I/O and IR Reverse Leakage Current VRWM = 5V, between I/O and VN VF Diode Forward Voltage IF = 15mA Cj Typ. Max. Units 5.0 V Between I/O and VN(3) Reverse Breakdown Voltage VCL Min. 6.0 0.70 V 0.85 1 µA 1 V 12 -3 V V 14 -5 V V 16.5 -7 V V Ground(5) Channel Clamp Voltage Positive Transients Negative Transient IPP = 1A, tp = 100ns, any I/O pin to Channel Clamp Voltage Positive Transients Negative Transient IPP = 5A, tp = 100ns, any I/O pin to Ground(5) Channel Clamp Voltage Positive Transients Negative Transient IPP = 12A, tp = 100ns, any I/O pin to Ground(5) Channel Input Capacitance VR = 0V, f = 1MHz, between I/O pins 0.30 0.35 pF VR = 0V, f = 1MHz, any I/O pin to Ground 0.60 0.75 pF Notes: 3. The working peak reverse voltage, VRWM, should be equal to or greater than the DC or continuous peak operating voltage level. 4. VBR is measured at the pulse test current IT. 5. Measurements performed using a 100ns Transmission Line Pulse (TLP) system. Rev. 1.0 October 2010 www.aosmd.com Page 3 of 9 AOZ8802A Typical Performance Characteristics Forward Voltage vs. Forward Peak Pulse Current I/O – Gnd Insertion Loss (S21) vs. Frequency (tperiod = 100ns, tr = 1ns) 8 0.00E+00 -5.00E+00 6 5 S21 (dB) Forward Voltage (V) 7 4 3 -1.00E+01 -1.50E+01 -2.00E+01 2 -2.50E+01 1 -3.00E+01 0 0 2 4 6 8 10 Forward Current, IPP (A) 12 14 1 1000 10000 Analog Crosstalk (I/O–I/O) vs. Frequency (tperiod = 100ns, tr = 1ns) 0 16 -20 Insertion Loss (dB) Clamping Voltage, VCL (V) 100 Frequency (MHz) Clamping Voltage vs. Peak Pulse Current 18 10 14 12 10 8 6 -40 -60 -80 -100 4 -120 2 0 2 4 6 8 10 Peak Puse Current, IPP (A) Rev. 1.0 October 2010 12 14 1 10 100 1000 10000 Frequency (MHz) www.aosmd.com Page 4 of 9 AOZ8802A Protecting USB Ports from ESD Because electrostatic discharge (ESD) is common in electronic systems, a device that provides protection from the undesirable effects of ESD must be included in the system design. Designing ESD protection structures is becoming more and more challenging with the system bus and I/O operating more often at high-speed data rates. An Integrated Circuit (IC) connected to external ports can be damaged by ESD from the operating environment. The result of ever-shrinking IC process technology is the decrease of ESD robustness because of the smaller geometry of the silicon die. Since USB is a hot insertion and removal system, the USB components are subjected to ESD and cable discharge event more frequently. Traditional methods of ESD protection include metal oxide varistors (MOVs), and regular CMOS or bipolar clamping diodes. At higher data rates the parasitic characteristics of those devices can cause distortion, deterioration and data loss of the signal integrity. AOZ8802A offers ESD protection for high-speed data rates and for diode array chips for ease of design. The very low 0.6pF (typical) line capacitance of the AOZ8802A ensures less distortion of the 480 Mbit/s USB 2.0 signal; the chips also protect against electrostatic discharge up to the stringent IEC61000-4-2 level 4, 8kV (Contact Discharge) and 15kV standard (Air Discharge). They also provide ultra low matching capacitance to help improve the signal quality of differential data lines. Monolithic integration provides high device reliability, and an optimized pin-out allows EMI-free board layouts. Figure 2 illustrates the flow through design of the PCB layout with the AOZ8802A package design. The pinout of the AOZ8802A is designed to simply drop onto the IO lines of a USB 2.0 design without having to divert the signal lines that may add more parasitic inductance. Pins 1, 2 & 3 is connected to the internal TVS devices and ground. and pins 4, 5, 6 are no connects. The no connects is in place so the package can be securely soldered onto the PCB surface. D+ D+ D- D- Ground Ground Figure 2. Flow-through Layout Rev. 1.0 October 2010 www.aosmd.com Page 5 of 9 AOZ8802A USB 2.0 PCB Layout Guidelines Printed circuit board layout is the key to achieving the highest level of surge immunity on power and data lines. The location of the protection devices on the PCB is the simplest and most important design rule to follow. The AOZ8802A devices should be located as close as possible to the noise source. The placement of the AOZ8802A devices should be used on all data and power lines that enter or exit the PCB at the I/O connector. In most systems, surge pulses occur on data and power lines that enter the PCB through the I/O connector. Placing the AOZ8802A devices as close as possible to the noise source ensures that a surge voltage will be clamped before the pulse can be coupled into adjacent PCB traces. In addition, the PCB should use the shortest possible traces. A short trace length equates to low impedance, which ensures that the surge energy will be dissipated by the AOZ8802A device. Long signal traces will act as antennas to receive energy from fields Rev. 1.0 October 2010 that are produced by the ESD pulse. By keeping line lengths as short as possible, the efficiency of the line to act as an antenna for ESD related fields is reduced. Minimize interconnecting line lengths by placing devices with the most interconnect as close together as possible. The protection circuits should shunt the surge voltage to either the reference or chassis ground. Shunting the surge voltage directly to the IC’s signal ground can cause ground bounce. The clamping performance of TVS diodes on a single ground PCB can be improved by minimizing the impedance with relatively short and wide ground traces. The PCB layout and IC package parasitic inductances can cause significant overshoot to the TVS’s clamping voltage. The inductance of the PCB can be reduced by using short trace lengths and multiple layers with separate ground and power planes. One effective method to minimize loop problems is to incorporate a ground plane in the PCB design. www.aosmd.com Page 6 of 9 AOZ8802A Package Dimensions, DFN-6 1.6mm x 1.0mm x 0.55mm e D b b1 L E 3 Pin #1 Dot by Marking TOP VIEW Pin #3 Identification R 0.130 2 1 e BOTTOM VIEW A c A1 Dimensions in millimeters SIDE VIEW RECOMMENDED LAND PATTERN 0.40 0.20 0.50 0.36 Symbols A A1 b b1 c D E e L Min. 0.50 0.00 0.15 Nom. 0.55 — 0.20 0.40 0.152 Ref. 1.55 1.60 0.95 1.00 0.50 BSC 0.33 0.38 Max. 0.60 0.05 0.25 1.65 1.05 0.43 Dimensions in inches Symbols A A1 b b1 c D E e L Min. 0.020 0.000 0.006 Nom. Max. 0.022 0.024 — 0.002 0.008 0.010 0.016 0.006 Ref. 0.061 0.063 0.065 0.037 0.039 0.041 0.020 BSC 0.013 0.015 0.017 1.20 0.72 0.24 0.48 0.50 0.30 0.10 UNIT: mm 0.15 Note: 1. Controlling dimension is millimeter. Converted inch dimensions are not necessarily exact. Rev. 1.0 October 2010 www.aosmd.com Page 7 of 9 AOZ8802A Tape and Reel Dimensions, DFN-6 1.6mm x 1.0mm x 0.55mm Carrier Tape P1 D1 T P2 E1 E2 E B0 K0 A0 P0 D0 Feeding Direction UNIT: mm Package DFN 1.6 x 1.0 (8 mm) A0 1.12 ±0.05 B0 1.72 ±0.05 K0 0.70 ±0.05 D0 0.55 ±0.05 D1 E 1.55 8.00 ±0.10 +0.30/-0.10 E1 1.75 ±0.10 E2 3.50 ±0.05 P0 4.00 ±0.10 P1 4.00 ±0.10 P2 2.00 ±0.10 T 0.25 ±0.05 Reel W1 S G N M K V R H W UNIT: mm Tape Size Reel Size 8mm ø178 M N W W1 H ø178.0 ±0.50 ø60.0 ±1 9.0 ±0.5 N/A ø13.0 +0.5/-0.2 K S 10.25 2.40 ±0.2 ±0.10 G R V ø9.8 N/A N/A Leader / Trailer & Orientation Trailer Tape 300mm Min. 75 Empty Pockets Rev. 1.0 October 2010 Components Tape Orientation in Pocket www.aosmd.com Leader Tape 500mm Min. 125 Empty Pockets Page 8 of 9 AOZ8802A Part Marking AOZ8802ADI (1.6 x 1.0 DFN) BB3 Product Number Code Assembly Lot Code Week Code This datasheet contains preliminary data; supplementary data may be published at a later date. Alpha & Omega Semiconductor reserves the right to make changes at any time without notice. LIFE SUPPORT POLICY ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. Rev. 1.0 October 2010 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.aosmd.com Page 9 of 9