AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE NEW PRODUCT Description Pin Assignments The AP2161D and AP2171D are integrated high-side power switches optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB 2.0 and is available with both polarities of Enable input. They offer current and thermal limiting and short circuit protection as well as controlled rise time and under-voltage lockout functionality. A 7ms deglitch capability on the opendrain Flag output prevents false over-current reporting and does not require any external components. ( Top View ) GND 1 8 NC IN 2 7 OUT IN 3 6 OUT EN 4 5 FLG All devices are available in SOT25, SO-8, MSOP-8-EP, and DFN2018-6 packages. SO-8 Features ( Top View ) • • • • • • • • • • • • • • • • • Single USB port power switches with output discharge Over-current and thermal protection 1.5A accurate current limiting Fast transient response Reverse Current Blocking 90mΩ on-resistance Input voltage range: 2.7V – 5.5V 0.6ms typical rise time Very low shutdown current: 1uA (max) Fault report (FLG) with blanking time (7ms typ) ESD protection: 4KV HBM, 300V MM Active high (AP2171D) or active low (AP2161D) enable Ambient temperature range -40ºC to 85°C SOT25, SO-8, MSOP-8-EP (Exposed Pad), and DFN2018-6: Available in “Green” Molding Compound (No Br, Sb) Lead Free Finish / RoHS Compliant (Note 1) UL Recognized, File Number E322375 IEC60950-1 CB Scheme Certified GND 1 8 NC IN 2 7 OUT IN 3 6 OUT EN 4 5 FLG MSOP-8-EP ( Top View ) OUT 1 GND 2 FLG 3 5 IN 4 EN SOT25 Applications ( Top View ) • • • Consumer electronics – LCD TV & Monitor, Game Machines Communications – Set-Top-Box, GPS, Smartphone Computing – Laptop, Desktop, Servers, Printers, Docking Station, HUB GND 1 6 OUT IN 2 5 OUT EN 3 4 FLG DFN2018-6 Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. AP2161D/2171D Document number: DS32250 Rev. 2 - 2 1 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Application Circuit AP2171D Enable Active High IN Power Supply 2.7V to 5.5V 10k 10uF Load OUT 0.1uF 0.1uF 120uF NEW PRODUCT FLG ON EN GND OFF Available Options Part Number Channel Enable pin (EN) Current limit (typical) Recommended maximum continuous load current AP2161D AP2171D 1 1 Active Low Active High 1.5A 1.5A 1A 1A Pin Descriptions Pin Number Pin Name SO-8 MSOP-8-EP SOT25 DFN2018-6 Descriptions GND 1 2 1 Ground IN 2, 3 4 2 3 Voltage input pin (all IN pins must be tied together externally) EN 5 4 FLG 5 3 4 Over-current and over-temperature fault report; open-drain flag is active low when triggered OUT 6, 7 1 5, 6 Voltage output pin (all OUT pins must be tied together externally) NC 8 N/A N/A No internal connection; recommend tie to OUT pins AP2161D/2171D Document number: DS32250 Rev. 2 - 2 Enable input, active low (AP2161D) or active high (AP2171D) 2 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Functional Block Diagram Current Sense IN Discharge Control UVLO NEW PRODUCT Current Limit Driver EN OUT FLG Deglitch Thermal Sense GND Absolute Maximum Ratings Symbol ESD HBM Human Body Model ESD Protection ESD MM VIN Machine Model ESD Protection Input Voltage VOUT VEN , VFLG Iload TJmax TST Notes: Parameter Output Voltage Enable Voltage Maximum Continuous Load Current Ratings Unit 4 KV 300 6.5 VIN + 0.3 V V V 6.5 V Internal Limited A 150 °C -65 to 150 °C Maximum Junction Temperature Storage Temperature Range (Note 2) 2. UL Recognized Rating from -30°C to 70°C (Diodes qualified TST from -65°C to 150°C) Recommended Operating Conditions Symbol VIN IOUT TA Parameter Input voltage Output Current Operating Ambient Temperature AP2161D/2171D Document number: DS32250 Rev. 2 - 2 3 of 17 www.diodes.com Min Max Unit 2.7 0 -40 5.5 1.0 85 V A °C September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Electrical Characteristics (TA = 25oC, VIN = +5.0V, unless otherwise stated) NEW PRODUCT Symbol Parameter VUVLO Input UVLO ISHDN Input Shutdown Current IQ Test Conditions Min Typ. Max Unit 1.6 1.9 2.5 V 0.5 1 μA Disabled, IOUT= 0 Input Quiescent Current Enabled, IOUT= 0 45 70 μA ILEAK Input Leakage Current Disabled, OUT grounded 0.1 1 μA IREV Reverse Leakage Current Disabled, VIN= 0V, VOUT= 5V, IREV at VIN 0.1 1 μA 95 115 90 110 RDS(ON) Switch on-resistance TA = 25°C SOT25, MSOP-8-EP, SO-8 VIN = 5V, IOUT= 1A DFN2018-6 -40°C ≤ TA ≤ 85°C VIN = 3.3V, IOUT= 1A ISHORT 140 120 TA = 25°C -40°C ≤ TA ≤ 85°C mΩ 140 170 Short-Circuit Current Limit Enabled into short circuit, CL=22μF ILIMIT Over-Load Current Limit VIN= 5V, VOUT= 4.0V, CL=120μF,-40°C ≤ TA ≤85°C ITrig Current limiting trigger threshold Output Current Slew rate (<100A/s) , CL=22μF VIL EN Input Logic Low Voltage VIN = 2.7V to 5.5V VIH EN Input Logic High Voltage VIN = 2.7V to 5.5V ISINK EN Input leakage VEN = 5V Output turn-on delay time CL=1μF, Rload=10Ω 0.05 Output turn-on rise time CL=1μF, Rload=10Ω 0.6 Output turn-off delay time CL=1μF, Rload=10Ω 0.05 0.05 0.1 ms 20 40 Ω 7 15 ms TD(ON) TR TD(OFF) Output turn-off fall time CL=1μF, Rload=10Ω RFLG TF FLG output FET on-resistance IFLG =10mA TBlank FLG blanking time CIN=10uF, CL=22μF RDIS Discharge resistance (Note 3) VIN = 5V, disabled, IOUT= 1mA TDIS 1.2 1.1 1.5 A 1.9 A 2.0 A 0.8 V 1 μA 2 4 V ms 1.5 ms ms 100 Ω Discharge Time CL= 1µF, VIN = 5V, disabled to VOUT < 0.5V 0.6 ms TSHDN Thermal Shutdown Threshold Enabled, Rload=1kΩ 140 °C THYS Thermal Shutdown Hysteresis 25 °C SOT25 (Note 4) θJA Thermal Resistance Junction-to- SO-8 (Note 4) Ambient MSOP-8-EP (Note 5) DFN2018-6 (Note 5) Notes: 170 127 67 o C/W 70 3. The discharge function is active when the device is disabled (when enable is de-asserted). The discharge function offers a resistive discharge path for the external storage capacitor. 4. Device mounted on FR-4 4 substrate PCB, 2oz copper, with minimum recommended pad layout. 5. Device mounted on 2” x 2” FR-4 substrate PCB, 2oz copper, with minimum recommended pad on top layer and thermal vias to bottom layer ground plane. AP2161D/2171D Document number: DS32250 Rev. 2 - 2 4 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics VEN 50% TD(ON) NEW PRODUCT 10% TD(OFF) TR TF 90% 50% 50% TD(OFF) TR VOUT VEN 50% TD(ON) 90% VOUT 10% TF 90% 10% 90% 10% Figure 1. Voltage Waveforms: AP2161D (left), AP2171D (right) All Enable Plots are for AP2171D Active High Turn-Off Delay and Fall Time Turn-On Delay and Rise Time Ven 5V/div Ven 5V/div Vout 2V/div CL=1uF TA=25°C CL=1uF RL=10Ω TA=25°C Vout 2V/div RL=10Ω 100us/div 100us/div Turn-On Delay and Rise Time Turn-Off Delay and Fall Time Ven 5V/div Ven 5V/div Vout 2V/div CL=120uF TA=25°C CL=120uF RL=10Ω TA=25°C RL=10Ω Vout 2V/div 500us/div AP2161D/2171D Document number: DS32250 Rev. 2 - 2 500us/div 5 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics (Continued) Short Circuit Current, Device Enabled Into Short Short Circuit with Blanking Time and Recovery Vout 5V/div Vflag 2V/div NEW PRODUCT Ven 5V/div VIN=5V TA=25°C CL=22uF Iout 500mA/div VIN=5V TA=25°C CL=22uF Iout 1A/div 100us/div 20ms/div 1 Ω Load Connected to Enabled Device 2 Ω Load Connected to Enabled Device Vflag 2V/div VIN=5V TA=25°C CL=22uF Vflag 2V/div VIN=5V TA=25°C CL=22uF Iout 1A/div Iout 1A/div 1ms/div 1ms/div Power Off Power On TA=25°C CL=120uF RL=10Ω Vflag 5V/div Vflag 5V/div TA=25°C CL=120uF RL=10Ω Iout 500mA/div Iout 500mA/div Ven 5V/div Ven 5V/div Vout 5V/div Vout 5V/div 20ms/div 2ms/div AP2161D/2171D Document number: DS32250 Rev. 2 - 2 6 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics (Continued) UVLO Decreasing UVLO Increasing TA=25°C CL=22uF RL=10Ω TA=25°C CL=22uF RL=10Ω Vin 2V/div Vin 2V/div Iout 500mA/div 20ms/div 2ms/div Discharge Time No Load Resistance Vout 2V/div Inrush Current TA=25°C VIN=5V No Load Resistance CL=470uF VIN=5V TA=25°C RL=10Ω CL=680uF CL=120uF CL=220uF Iin 400mA/div CL=100uF CL=22uF Ven 2V/div Ven 5V/div 100ms/div 1ms/div Turn-On Time vs Input Voltage Turn-Off Time vs Input Voltage 800 31 700 31 600 Turn-Off Time (us) Turn-On Time (us) NEW PRODUCT Iout 500mA/div 500 400 CL=1uF RL=10Ω TA=25°C 300 200 30 CL=1uF RL=10Ω TA=25°C 30 29 29 28 100 28 0 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 1.5 AP2161D/2171D Document number: DS32250 Rev. 2 - 2 2 2.5 3 3.5 4 4.5 5 5.5 6 Input Voltage (V) Input Voltage (V) 7 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics (Continued) Fall Time vs Input Voltage 25 500 24 400 23 Fall Time (us) Rise Time (us) 600 300 CL=1uF RL=10Ω TA=25°C 200 22 CL=1uF RL=10Ω TA=25°C 21 20 100 19 0 1.5 2 2.5 3 3.5 4 4.5 5 5.5 1.5 6 2 2.5 3 4 4.5 5 5.5 6 Supply Current, Output Disabled vs Ambient Temperature Supply Current, Output Enabled vs Ambient Temperature 1.60 Supply Current, Output Disabled (uA) 65 Supply Current, Output Enabled (uA) 3.5 Input Voltage (V) Input Voltage (V) 60 Vin=5.0V 55 Vin=5.5V 50 45 Vin=2.7V 40 Vin=3.3V 35 Vin=5.5V 1.40 1.20 Vin=5.0V 1.00 Vin=3.3V 0.80 0.60 Vin=2.7V 0.40 0.20 0.00 30 -60 -40 -20 0 20 40 60 80 -45 100 -25 -5 15 35 55 75 95 Ambient Temperature (°C) Ambient Temperature (°C) Short-Circuit Output Current vs Ambient Temperature Static Drain-Source On-State Resistance vs Ambient Temperature 710 Short-Circuit Output Current (mA) 200 190 Static Drain-Source On-State Resistance (mΩ) NEW PRODUCT Rise Time vs Input Voltage 180 Vin=2.7V Vin=3.3V 170 160 150 140 130 120 110 Vin=5V 100 700 Vin=3.3V Vin=2.7V Vin=5.0V 690 680 670 660 650 Vin=5.5V 640 630 -60 -40 -20 0 20 40 60 80 100 -60 Ambient Temperature (°C) AP2161D/2171D Document number: DS32250 Rev. 2 - 2 -40 -20 0 20 40 60 80 100 Ambient Temperature (°C) 8 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics (Continued) Threshold Trip Current vs Input Voltage Undervoltage Lockout vs Ambient Temperature 1.15 2.05 Threshold Trip Current (A) Undervoltage Lockout (V) NEW PRODUCT 2.04 2.03 UVLO Rising 2.02 2.01 2.00 1.99 UVLO Falling 1.98 1.97 1.14 1.13 1.12 TA=25°C CL=22uF 1.11 1.96 1.10 1.95 -60 -40 -20 0 20 40 60 80 100 2.8 AP2161D/2171D Document number: DS32250 Rev. 2 - 2 3.3 3.8 4.3 4.8 5.3 Input Voltage (V) Ambient Temperature (°C) 9 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Application Note NEW PRODUCT The AP2161D and AP2171D are integrated high-side power switches optimized for Universal Serial Bus (USB) that require protection functions. The power switches are equipped with a driver that controls the gate voltage and incorporates slew-rate limitation. This, along with the various protection features and special functions, makes these power switches ideal for hot-swap or hot-plug applications. Protection Features: Under-voltage Lockout (UVLO) Under-voltage lockout function (UVLO) guarantees that the internal power switch is initially off during start-up. The UVLO functions only when the switch is enabled. Even if the switch is enabled, the switch is not turned ON until the power supply has reached at least 1.9V. Whenever the input voltage falls below approximately S.NO 1 1.9V, the power switch is turned off. This facilitates the design of hot-insertion systems where it is not possible to turn off the power switch before input power is removed. Over-current and Short Circuit Protection An internal sensing FET is employed to check for overcurrent conditions. Unlike current-sense resistors, sense FETs do not increase the series resistance of the current path. When an over-current condition is detected, the device maintains a constant output current and reduces the output voltage accordingly. Complete shutdown occurs only if the fault stays long enough to activate thermal limiting. The different overload conditions and the corresponding response of the AP2161D/2171D are outlined below: Conditions Short circuit condition at start-up Explanation Output is shorted before input voltage is applied or before the part is enabled Behavior of the AP2161D/2171D The IC senses the short circuit and immediately clamps output current to a certain safe level namely ILIMIT. 2 Short-circuit or overcurrent condition Short-Circuit or Overload condition that occurs when the part is enabled. • At the instance the overload occurs, higher current may flow for a very short period of time before the current limit function can react. • After the current limit function has tripped (reached the over-current trip threshold), the device switches into current limiting mode and the current is clamped at ILIMIT. 3 Gradual increase from nominal operating current to ILIMIT Load increases gradually until the current-limit threshold.(ITRIG) The current rises until ITRIG or thermal limit. Once the threshold has been reached, the device switches into its current limiting mode and is set at ILIMIT. Note that when the output has been shorted to GND at o extremely low temperature (< -30 C), a minimum 120-μF electrolytic capacitor on the output pin is recommended. A correct capacitor type with capacitor voltage rating and temperature characteristics must be properly chosen so that capacitance value does not drop too low at the extremely low temperature operation. A recommended capacitor should have temperature characteristics of less than 10% variation of capacitance change when operated at extremely low temp. Our recommended aluminum electrolytic capacitor type is Panasonic FC series. Thermal Protection Thermal protection prevents the IC from damage when the die temperature exceeds safe margins. This mainly occurs when heavy-overload or short-circuit faults are AP2161D/2171D Document number: DS32250 Rev. 2 - 2 present for extended periods of time. The AP2161D/AP2171D implements thermal sensing to monitor the operating junction temperature of the power distribution switch. Once the die temperature rises to approximately 140°C, the Thermal protection feature gets activated as follows: The internal thermal sense circuitry turns the power switch off and the FLG output is asserted thus preventing the power switch from damage. Hysteresis in the thermal sense circuit allows the device to cool down to approximately 25°C before the output is turned back on. The built-in thermal hysteresis feature avoids undesirable oscillations of the thermal protection circuit. The switch continues to cycle in this manner until the load fault is removed, resulting in a pulsed output. The FLG open-drain output is asserted when an overcurrent occurs with 7-ms deglitch. 10 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Application Note (Continued) Reverse Current Protection NEW PRODUCT In a normal MOSFET switch, current can flow in reverse direction (from the output side to the input side) when the output side voltage is higher than the input side, even when the switch is turned off. A reverse-current blocking feature is implemented in the AP21x1 series to prevent such back currents. This circuit is activated by the difference between the output voltage and the input voltage. When the switch is disabled, this feature blocks reverse current flow from the output back to the input. Special Functions: may cause ringing on the input. Additionally, bypassing the output with a 0.01-μF to 0.1-μF ceramic capacitor improves the immunity of the device to short-circuit transients. This capacitor also prevents output from going negative during turn-off due to inductive parasitics. Power Dissipation and Junction Temperature The low on-resistance of the internal MOSFET allows the small surface-mount packages to pass large current. Using the maximum operating ambient temperature (TA) and RDS(ON), the power dissipation can be calculated by: PD = RDS(ON)× I2 Discharge Function When enable is de-asserted, the discharge function is active. The output capacitor is discharged through an internal NMOS that has a discharge resistance of 100Ω. Hence, the output voltage drops down to zero. The time taken for discharge is dependent on the RC time constant of the resistance and the output capacitor. FLG Response The FLG open-drain output goes active low for any of the two conditions: Over-Current or Over-Temperature. The time from when a fault condition is encountered to when the FLG output goes low is 7-ms (TYP). The FLG output remains low until both over-current and over-temperature conditions are removed. Connecting a heavy capacitive load to the output of the device can cause a momentary Over-current condition, which does not trigger the FLG due to the 7-ms deglitch timeout. The 7-ms timeout is also applicable for Over-current recovery and Thermal recovery. The AP2161D/AP2171D are designed to eliminate erroneous Over-current reporting without the need for external components, such as an RC delay network. Applications Information: Power Supply Considerations A 0.01-μF to 0.1-μF X7R or X5R ceramic bypass capacitor between IN and GND, close to the device, is recommended. This limits the input voltage drop during line transients. Placing a high-value electrolytic capacitor on the input (10-μF minimum) and output pin(s) is recommended when the output load is heavy. This precaution also reduces power-supply transients that AP2161D/2171D Document number: DS32250 Rev. 2 - 2 The junction temperature can be calculated by TJ = PD x RθJA + TA Where: TA= Ambient temperature °C RθJA = Thermal resistance PD = Total power dissipation Generic Hot-Plug Applications In many applications it may be necessary to remove modules or PC boards while the main unit is still operating. These are considered hot-plug applications. Such implementations require the control of current surges as seen by the main power supply and the card being inserted. The most effective way to control these surges is to limit and slowly ramp up the current and voltage being applied to the card, similar to the way in which a power supply normally turns on. Due to the controlled rise and fall times of the AP2161D/AP2171D, these devices can be used to provide a softer start-up to devices being hot-plugged into a powered system. The UVLO feature of the AP2161D/AP2171D also ensures that the switch is off after the card has been removed, and that the switch is off during the next insertion. By placing the AP2161D/AP2171D between the VCC input and the rest of the circuitry, the input power reaches these devices first after insertion. The typical rise time of the switch is approximately 1ms, providing a slow voltage ramp at the output of the device. This implementation controls the system surge current and provides a hot-plugging mechanism for any device. 11 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Ordering Information NEW PRODUCT AP 21 X 1 D XX G - X Enable Channel Package Green 6 : Active Low 7 : Active High 1 : 1 Channel S : SO-8 MP : MSOP-8-EP W : SOT25 FM : DFN2018-6 G : Green Device AP21X1DSG-13 AP21X1DMPG-13 AP21X1DWG-7 AP21X1DFMG-7 Notes: Package Code S MP W FM Packaging (Note 6) SO-8 MSOP-8-EP SOT25 DFN2018-6 Packing 7/13 : Tape & Reel 7”/13” Tape and Reel Quantity Part Number Suffix 2500/Tape & Reel -13 2500/Tape & Reel -13 3000/Tape & Reel -7 3000/Tape & Reel -7 6. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Marking Information (1) SO-8 ( Top View ) 8 7 6 5 1 : 1 Channel YY : Year : 08, 09,10~ WW : Week : 01~52; 52 represents 52 and 53 week X : Internal Code G : Green Logo Part Number 6 : Active Low 7 : Active High AP21X X D YY WW X X 1 AP2161D/2171D Document number: DS32250 Rev. 2 - 2 2 3 4 12 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Marking Information (Continued) (2) MSOP-8-EP ( Top View ) 8 7 6 YWXE AP21X X D Part Number 6 : Active Low 7 : Active High 1 2 3 A~Z : Green MSOP-8-EP Y : Year : 0~9 W : Week : a~z : 1~26 week; A~Z : 27~52 week; Z represents 52 and 53 week 1 : 1 Channel 4 (3) SOT25 ( Top View ) 5 4 7 NEW PRODUCT Logo 5 XX : Identification code Y : Year 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Green XX Y W X 1 2 3 Device Package type Identification Code AP2161DW AP2171DW SOT25 SOT25 JC JD (4) DFN2018-6 (Top View) XX YWX XX : Identification Code Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Green Device Package type Identification Code AP2161DFM AP2171DFM DFN2018-6 DFN2018-6 JC JD AP2161D/2171D Document number: DS32250 Rev. 2 - 2 13 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Package Outline Dimensions (All Dimensions in mm) 0.254 0.10/0.20 5.90/6.10 3.85/3.95 (1) Package type: SO-8 Gauge Plane Seating Plane 0.62/0.82 NEW PRODUCT Detail "A" 7°~9° 7°~9° 0.15/0.25 1.30/1.50 1.75max. 0.35max. 45° Detail "A" 0°/8° 0.3/0.5 1.27typ 4.85/4.95 5.4 8x-0.60 8x-1.55 6x-1.27 Land Pattern Recommendation (Unit: mm) (2) Package type: MSOP-8-EP EXPOSED PAD (BOTTOM) 4.4 4.7/5.1 2.9/3.1 8x-0.45 8x-1.4 6x-0.65 1 Land Pattern Recommendation (Unit:mm) "A" 1 0.25 0.05 2.9/3.1 Gauge plane 0.4/0.8 ° 0.05/0.15 1.35/1.65 EXPOSED PAD (BOTTOM) 0.95Ref. 0 °/ 8 0.75/0.95 0.22/0.38 1.10Max. 0.15Typ. 1 0.65Bsc. DETAIL "A" 1.65/1.95 AP2161D/2171D Document number: DS32250 Rev. 2 - 2 14 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Package Outline Dimensions (Continued) NEW PRODUCT (3) Package type: SOT25 0.13Typ Seating Plane Side View 1.75/1.875 B A CL 0.9/1.1 1.3/1.5 CL Pin #1 0.20 0.2/0.3 CL Pin #1 ID 1.95/2.075 CL C 1.20 2X0.25 A 0.08 C 6x-0.35 6X- 0/0.05 0.10 C 0.47/0.53 (4) Package type: DFN2018-6 4x-0.50 6x-0.25 1.600 Land Pattern Recommendation (Unit:mm) 2X- Top View 0.25 B 0.50Typ 0.15/0.25 0.10 C A B Bottom View AP2161D/2171D Document number: DS32250 Rev. 2 - 2 15 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Taping Orientation (Note 7) NEW PRODUCT For DFN2018-6 Notes: 7. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf AP2161D/2171D Document number: DS32250 Rev. 2 - 2 16 of 17 www.diodes.com September 2010 © Diodes Incorporated AP2161D/AP2171D 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com AP2161D/2171D Document number: DS32250 Rev. 2 - 2 17 of 17 www.diodes.com September 2010 © Diodes Incorporated