ATMEL ATF22LV10CQZ-30PU

Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3.0V to 5.5V Operating Range
Lowest Power in Its Class
Advanced Low-voltage, Zero-power, Electrically Erasable Programmable Logic Device
“Zero” Standby Power (25µA Maximum) (Input Transition Detection)
Low-voltage Equivalent of Atmel ATF22V10CZ
Ideal for Battery Powered Systems
CMOS- and TTL-compatible Inputs and Outputs
Inputs are 5V Tolerant
Latch Feature Hold Inputs to Previous Logic States
EE Technology
– Reprogrammable
– 100% Tested
High-reliability CMOS Process
– 20-year Data Retention
– 10,000 Erase/Write Cycles
– 2,000V ESD Protection
– 200mA Latch-up Immunity
Commercial and Industrial Temperature Ranges
Dual Inline and Surface Mount Standard Pinouts
Green Package Options (Pb/Halide-free/RoHS Compliant) Available
1.
High-performance
Electrically
Erasable
Programmable
Logic Device
Atmel ATF22LV10CZ
Atmel ATF22LV10CQZ
Description
The Atmel® ATF22LV10CZ/CQZ is a high-performance CMOS (electrically erasable)
programmable logic device (PLD) that utilizes The Atmel proven electrically erasable
Flash memory technology and provides 25ns speed with standby current of 25µA
maximum. All speed ranges are specified over the 3.0V to 5.5V range for industrial
and commercial temperature ranges.
The ATF22LV10CZ/CQZ provides a low-voltage and edge-sensing “zero” power
CMOS PLD solution with “zero” standby power (5µA typical). The
ATF22LV10CZ/CQZ powers down automatically to the zero power mode through The
Atmel patented Input Transition Detection (ITD) circuitry when the device is idle. The
ATF22LV10CZ/CQZ is capable of operating at supply voltages down to 3.0V. Pin
“keeper” circuits on input and output pins hold pins to their previous logic levels when
idle, which eliminate static power consumed by pull-up resistors. The “CQZ” combines
this low high-frequency ICC of the “Q” design with the “Z” feature.
The ATF22LV10CZ/CQZ macrocell incorporates a variable product term architecture.
Each output is allocated from 8 to 16 product terms which allows highly complex logic
functions to be realized. Two additional product terms are included to provide synchronous reset and asynchronous reset. These additional product terms are common
to all ten registers and are automatically cleared upon power-up. Register Preload
simplifies testing. A security fuse prevents unauthorized copying of programmed fuse
patterns.
0779M–PLD–7/10
Figure 1-1.
2.
Block Diagram
Pin Configurations
Table 2-1.
Pin Configurations (All Pinouts Top View)
Pin Name
Function
CLK
Clock
IN
Logic Inputs
I/O
Bi-directional Buffers
GND
Ground
VCC
(3 to 5.5V) Supply
Figure 2-1.
TSSOP
1
2
3
4
5
6
7
8
9
10
11
12
CLK/IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
GND
Note:
Figure 2-2.
24
23
22
21
20
19
18
17
16
15
14
13
VCC
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
IN
DIP/SOIC
CLK/IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
GND
1
2
3
4
5
6
7
8
9
10
11
12
24
23
22
21
20
19
18
17
16
15
14
13
VCC
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
IN
TSSOP is the smallest package of SPLD
offering
PLCC
25
24
23
22
21
20
19
12
13
14
15
16
17
18
5
6
7
8
9
10
11
I/O
I/O
I/O
GND*
I/O
I/O
I/O
IN
IN
GND
GND*
IN
I/O
I/O
IN
IN
IN
GND*
IN
IN
IN
4
3
2
1
28
27
26
IN
IN
CLK/IN
VCC*
VCC
I/O
I/O
Figure 2-3.
Note:
2
For PLCC, pins 1, 8, 15, and 22 can be
left unconnected. For superior performance, connect VCC to pin 1 and GND
to pins 8, 15, and 22
Atmel ATF22LV10C(Q)Z
0779M–PLD–7/10
Atmel ATF22LV10C(Q)Z
3.
Absolute Maximum Ratings*
*NOTICE:
Temperature under Bias ................... -40°C to +85°C
Storage Temperature...................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground...........................-2.0V to +7.0V(1)
Voltage on Input Pins
with Respect to Ground
during Programming ......................-2.0V to +14.0V(1)
Note:
Programming Voltage with
Respect to Ground.........................-2.0V to +14.0V(1)
4.
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of
the device at these or any other conditions beyond
those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device
reliability.
1. Minimum voltage is -0.6V DC, which may undershoot to 2.0V for pulses of less than 20ns. Maximum output pin
voltage is VCC + 0.75V DC, which may overshoot to 7.0V
for pulses of less than 20ns.
DC and AC Operating Conditions
Commercial
Industrial
Operating Temperature (Ambient)
0C - 70C
-40C - 85C
VCC Power Supply
3.0V - 5.5V
3.0V - 5.5V
3
0779M–PLD–7/10
4.1
DC Characteristics
Symbol
Parameter
Condition(2)
IIL
Input or I/O Low
Leakage Current
0  VIN  VIL (Max)
IIH
Input or I/O High
Leakage Current
(VCC - 0.2)V  VIN  VCC
Min
CZ-25(3)
ICC
ISB
Clocked Power
Supply Current
Power Supply Current,
Standby
VCC = Max
Outputs Open,
f = 15MHz
VCC = Max
VIN = Max
Outputs Open
Typ
Max
Units
-10.0
µA
10.0
µA
Com.
50.0
85.0
mA
Ind.
55.0
90.0
mA
CQZ-30
Com.
18.0
50.0
mA
CQZ-30
Ind.
19.0
60.0
mA
CZ-25(3)
Com.
3.0
25.0
µA
Ind.
4.0
50.0
µA
CQZ-30
Com.
3.0
25.0
µA
CQZ-30
Ind.
4.0
50.0
µA
-130.0
mA
CZ-25
CZ-25
(3)
(3)
IOS(1)
Output Short Circuit
Current
VIL
Input Low Voltage
-0.5
0.8
V
VIH
Input High Voltage
2.0
VCC + 0.75
V
VOL
Output Low Voltage
VIN = VIH or VIL
VCC = Min,
IOL = 16mA
0.5
V
VOH
Output High Voltage
VIN = VIH or VIL
VCCIO = Min,
IOH = -2.0mA
2.4
V
VOH
Output High Voltage
IOH = -100 µA
VCC - 0.2V
V
Note:
VOUT = 0.5V
1. Not more than one output at a time should be shorted. Duration of short circuit test should not exceed 30 sec
2. For DC characterization, the test condition of VCC = Max corresponds to 3.6V
3. Shaded devices are becoming obsolete and replaced with CQZ-30 part in green package offering
4
Atmel ATF22LV10C(Q)Z
0779M–PLD–7/10
Atmel ATF22LV10C(Q)Z
4.2
AC Waveforms
INPUTS, I/O
REG. FEEDBACK
SYNCH. PRESET
tS
tH
tW
tW
CP
tP
tAW
tAR
ASYNCH. RESET
tCO
tAP
REGISTERED
OUTPUTS
VALID
tER
4.3
OUTPUT
DISABLED
VALID
tPD
COMBINATORIAL
OUTPUTS
tEA
tER
VALID
VALID
tEA
OUTPUT
DISABLED
VALID
VALID
AC Characteristics(1)
-25(2)
-30
Symbol
Parameter
Min
Max
Min
Max
Units
tPD
Input or Feedback to Non-registered Output
3.0
25.0
10.0
30.0
ns
tCF
Clock to Feedback
13.0
10.0
15.0
ns
tCO
Clock to Output
2.0
15.0
4.0
20.0
ns
tS
Input or Feedback Setup Time
15.0
18.0
ns
tH
Input Hold Time
0
0
ns
tP
Clock Period
25.0
30.0
ns
tW
Clock Width
12.5
15.0
ns
fMAX
External Feedback 1/(tS + tCO)
Internal Feedback 1/(tS + tCF)
No Feedback 1/(tP)
33.3
35.7
40.0
tEA
Input to Output Enable
3.0
25.0
tER
Input to Output Disable
3.0
tAP
Input or I/O to Asynchronous Reset of Register
3.0
tSP
Setup Time, Synchronous Preset
15.0
20.0
ns
tAW
Asynchronous Reset Width
25.0
30.0
ns
tAR
Asynchronous Reset Recovery Time
25.0
30.0
ns
tSPR
Synchronous Preset to Clock Recovery Time
15.0
20.0
ns
Note:
25.0
30.0
33.3
MHz
MHz
MHz
10.0
30.0
ns
25.0
10.0
30.0
ns
25.0
10.0
3.0
ns
1. See ordering information for valid part numbers
2. Shaded products are becoming obsolete
5
0779M–PLD–7/10
4.4
Input Test Waveforms
4.4.1
Input Test Waveforms and Measurement Levels
4.4.2
Output Test Loads
Note:
4.5
Similar competitors devices are specified with slightly different loads. These load differences may affect output signals’
delay and slew rate. Atmel devices are tested with sufficient margins to meet compatible device specification
conditions
Pin Capacitance
Table 4-1.
Typ
Max
Units
Conditions
CIN
5
8
pF
VIN = 0V
CI/O
6
8
pF
VOUT = 0V
Note:
4.6
Pin Capacitance (f = 1MHz, T = 25C(1))
1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested
Power-up Reset
The registers in the Atmel® ATF22LV10CZ/CQZ are designed to reset during power-up. At a point delayed slightly
from VCC crossing VRST, all registers will be reset to the low state. The output state will depend on the polarity of the
buffer.
This feature is critical for state machine initialization. However, due to the asynchronous nature of reset and the
uncertainty of how VCC actually rises in the system, the following conditions are required:
1. The VCC rise must be monotonic and start below 0.7V
2. The clock must remain stable during TPR
3. After TPR, all input and feedback setup times must be met before driving the clock pin high
4.7
Preload of Register Outputs
The ATF22LV10CZ/CQZ’s registers are provided with circuitry to allow loading of each register with either a high or
a low. This feature will simplify testing since any state can be forced into the registers to control test sequencing. A
JEDEC file with preload is generated when a source file with vectors is compiled. Once downloaded, the JEDEC
file preload sequence will be done automatically by most of the approved programmers after the programming.
6
Atmel ATF22LV10C(Q)Z
0779M–PLD–7/10
Atmel ATF22LV10C(Q)Z
5.
Electronic Signature Word
There are 64-bits of programmable memory that are always available to the user, even if the device is secured.
These bits can be used for user-specific data.
6.
Security Fuse Usage
A single fuse is provided to prevent unauthorized copying of the Atmel® ATF22LV10CZ/CQZ fuse patterns. Once
programmed, fuse verify and preload are inhibited. However, the 64-bit User Signature remains accessible.
The security fuse should be programmed last, as its effect is immediate.
7.
Programming/Erasing
Programming/erasing is performed using standard PLD programmers. See CMOS PLD Programming
Hardware and Software Support for information on software/ programming.
Table 7-1.
8.
Programming/Erasing
Parameter
Description
Typ
Max
Units
TPR
Power-up
Reset Time
600
1000
ns
VRST
Power-up
Reset Voltage
2.3
2.7
V
Input and I/O Pin Keepers
All ATF22LV10CZ/CQZ family members have internal input and I/O pin-keeper circuits. Therefore, whenever
inputs or I/Os are not being driven externally, they will maintain their last driven state. This ensures that all logic
array inputs and device outputs are at known states. These are relatively weak active circuits that can be easily
overridden by TTL-compatible drivers (see input and I/O diagrams below).
Figure 8-1.
Input Diagram
VCC
100K
INPUT
ESD
PROTECTION
CIRCUIT
7
0779M–PLD–7/10
Figure 8-2.
I/O Diagram
VCC
OE
DATA
I/O
VCC
INPUT
100K
9.
Functional Logic Diagram Description
The Functional Logic Diagram describes the Atmel® ATF22LV10CZ/CQZ architecture.
The ATF22LV10CZ/CQZ has 12 inputs and 10 I/O macrocells. Each macrocell can be configured into one of four
output configurations: active high/low or registered/combinatorial. The universal architecture of the
ATF22LV10CZ/CQZ can be programmed to emulate most 24-pin PAL devices.
Unused product terms are automatically disabled by the compiler to decrease power consumption. A security fuse,
when programmed, protects the contents of the ATF22LV10CZ/CQZ. Eight bytes (64-fuses) of User Signature are
accessible to the user for purposes such as storing project name, part number, revision or date. The User
Signature is accessible regardless of the state of the security fuse.
8
Atmel ATF22LV10C(Q)Z
0779M–PLD–7/10
Atmel ATF22LV10C(Q)Z
Figure 9-1.
Functional Logic Diagram Atmel ATF22LV10CZ/CQZ
9
0779M–PLD–7/10
ATMEL ATF22LV10CZ/CQZ STANDBY
CURRENT VS. SUPPLY VOLTAGE (TA = 25°C)
NORMALIZED ICC VS. TEMP
1.2
NORMALIZED ICC
3.500
ICC (uA)
3.000
2.500
2.000
1.500
1.000
0.500
1.1
1.0
0.9
0.8
-40.0
0.0
25.0
TEMPERATURE (C)
0.000
3.00
3.30
75.0
3.60
VCC (V)
ATMEL ATF22LV10CZ SUPPLY CURRENT
VS. INPUT FREQUENCY (VCC = 3.3V, TA = 25°C)
25.000
50.000
20.000
I CC (mA)
60.000
40.000
ICC (mA)
ATMEL ATF22LV10CQZ SUPPLY CURRENT VS.
INPUT FREQUENCY (VCC = 3.3V, TA = 25°C)
30.000
15.000
10.000
5.000
20.000
0.000
10.000
0.0
0.000
2.5
5.0
7.5
10.0
25.0
37.5
50.0
Frequency (MHz)
0
0.5
2.5
5
7.5
10
Frequency (MHz)
25
37.5
50
ATMEL ATF22LV10C/CZ OUTPUT SOURCE
CURRENT VS. OUTPUT VOLTAGE (VCC = 3.3V, TA = 25°C)
ATMEL ATF22LV10CZ/CQZ SOURCE
CURRENT VS. SUPPLY VOLTAGE (VOH = 2.4V)
0.0
-2.0
-4.0
-6.0
-8.0
-10.0
-12.0
-14.0
0.0
IOH (mA)
-2.0
Ioh (mA)
0.5
-4.0
-6.0
-8.0
-10.0
-12.0
3.0
3.2
3.3
3.5
2.0
3.6
2.2
2.4
2.6
2.8
VOH (V)
3.0
3.2
3.3
SUPPLY VOLTAGE (V)
ATMEL ATF22LV10CZ/CQZ OUTPUT SINK
CURRENT VS. OUTPUT VOLTAGE (VCC = 3.3V, TA = 25°C)
100.0
40.0
39.0
38.0
37.0
36.0
35.0
34.0
33.0
32.0
80.0
I OL (mA)
I OL (mA)
ATMEL ATF22LV10CZ/CQZ OUTPUT SINK
CURRENT VS. SUPPLY VOLTAGE (VOL = 0.5V)
40.0
20.0
0.0
3.0
3.2
3.3
3.5
3.6
SUPPLY VOLTAGE (V)
10
60.0
0.00
0.50
1.00
1.50
2.00
VOL (V)
2.50
3.00
3.30
Atmel ATF22LV10C(Q)Z
0779M–PLD–7/10
Atmel ATF22LV10C(Q)Z
ATMEL ATF22LV10CZ/CQZ INPUT CURRENT
VS. INPUT VOLTAGE (VCC = 3.3V, TA = 25°C)
20.0
0.0
-20.0
-40.0
-60.0
-80.0
-100.0
-120.0
INPUT CURRENT (µA)
INPUT CURRENT (mA)
ATMEL ATF22LV10CZ/CQZ INPUT CLAMP
CURRENT VS. INPUT VOLTAGE (VCC = 3.3V, TA = 25°C)
0.0
-0.2
-0.4
-0.6
INPUT VOLTAGE (V)
-0.8
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
-2.0
-4.0
-1.0
0.0
NORMALIZED TPD
NORMALIZED TPD
1.5
2.0
2.5
INPUT VOLTAGE (V)
3.0
3.5
4.0
1.2
1.2
1.1
1.0
0.9
0.8
1.1
1.0
0.9
0.8
3.0
3.2
3.3
SUPPLY VOLTAGE (V)
3.5
3.6
-40.0
0.0
25.0
TEMPERATURE (C)
75.0
NORMALIZED TCO VS. TEMP
NORMALIZED TCO VS. VCC
1.2
1.2
NORMALIZED TCO
NORMALIZED TCO
1.0
NORMALIZED TPD VS. TEMP
NORMALIZED TPD VS. VCC
1.1
1.0
0.9
0.8
3.0
3.2
3.3
SUPPLY VOLTAGE (V)
3.5
1.1
1.0
0.9
0.8
-40.0
3.6
0.0
25.0
75.0
TEMPERATURE (C)
NORMALIZED TSU VS. VCC
NORMALIZED TSU VS. TEMP
1.2
1.2
NORMALIZED TSU
NORMALIZED TSU
0.5
1.1
1.0
0.9
0.8
1.1
1.0
0.9
0.8
3.0
3.2
3.3
SUPPLY VOLTAGE (V)
3.5
3.6
-40.0
0.0
25.0
75.0
TEMPERATURE (C)
11
0779M–PLD–7/10
ATMEL AT22LV10CZ/CQZ
DELTA TPD VS. OUTPUT LOADING
ATMEL AT22LV10CZ/CQZ
DELTA TCO VS. OUTPUT LOADING
15.0
DELTA TCO (ns)
DELTA TPD (ns)
15.0
10.0
5.0
0.0
10.0
5.0
0.0
-5.0
-5.0
0.00
0.50
1.00
1.50
2.00
OUTPUT LOADING (PF)
2.50
0.00
3.00
0.0
0.0
-0.1
-0.1
DELTA TCO (ns)
DELTA TPD (ns)
1.00
1.50
2.00
OUTPUT LOADING (PF)
2.50
3.00
DELTA TCO VS. # OF OUTPUT SWITCHING
DELTA TPD VS. # OF OUTPUT SWITCHING
-0.2
-0.3
-0.4
-0.5
-0.6
-0.1
-0.2
-0.2
-0.3
-0.7
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
NUMBER OF OUTPUTS SWITCHING
12
0.50
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
NUMBER OF OUTPUTS SWITCHING
Atmel ATF22LV10C(Q)Z
0779M–PLD–7/10
Atmel ATF22LV10C(Q)Z
10.
Ordering Information
10.1
Standard Package Options(1)
tPD (ns)
25
Notes:
10.2
15
tCO (ns)
15
Ordering Code
Package
Operation Range
ATF22LV10CZ-25JC
ATF22LV10CZ-25PC
ATF22LV10CZ-25SC
ATF22LV10CZ-25XC
28J
24P3
24S
24X
Commercial
(0C to 70C)
ATF22LV10CZ-25JI
ATF22LV10CZ-25PI
ATF22LV10CZ-25SI
ATF22LV10CZ-25XI
28J
24P3
24S
24X
Industrial
(-40C to +85C)
ATF22LV10CQZ-30JC
ATF22LV10CQZ-30PC
ATF22LV10CQZ-30SC
ATF22LV10CQZ-30XC
28J
24P3
24S
24X
ATF22LV10CQZ-30JI
ATF22LV10CQZ-30PI
ATF22LV10CQZ-30SI
ATF22LV10CQZ-30XI
28J
24P3
24S
24X
Commercial
(0C to 70C)
Industrial
(-40C to +85C)
1. Shaded devices are becoming obsolete and replaced with CQZ-30 parts in green product/package options listed
below.
Atmel ATF22LV10CQZ Green Package Options (Pb/Halide-free/RoHS Compliant)
tPD (ns)
30
10.3
tS (ns)
tS (ns)
15
tCO (ns)
15
Ordering Code
ATF22LV10CQZ-30JU
ATF22LV10CQZ-30PU
ATF22LV10CQZ-30SU
ATF22LV10CQZ-30XU
Package
Operating Range
28J
24P3
24S
24X
Industrial
(-40C to +85C)
Using “C” Product for Industrial
To use commercial product for industrial temperature ranges, simply de-rate ICC by 15% on the “C” device. No
speed de-rating is necessary.
Package Type
28J
28-lead, Plastic J-leaded Chip Carrier (PLCC)
24P3
24-pin, 0.300" Wide, Plastic Dual Inline Package (PDIP)
24S
24-lead, 0.300" Wide, Plastic Gull Wing Small Outline (SOIC)
24X
24-lead, 4.4 mm Wide, Plastic Thin Shrink Small Outline (TSSOP)
13
0779M–PLD–7/10
11.
Packaging Information
11.1
28J – PLCC
1.14(0.045) X 45°
PIN NO. 1
1.14(0.045) X 45°
0.318(0.0125)
0.191(0.0075)
IDENTIFIER
E1
E
D2/E2
B1
B
e
A2
D1
A1
D
A
0.51(0.020)MAX
45° MAX (3X)
COMMON DIMENSIONS
(Unit of Measure = mm)
Notes: 1. This package conforms to JEDEC reference MS-018, Variation AB.
2. Dimensions D1 and E1 do not include mold protrusion.
Allowable protrusion is .010"(0.254mm) per side. Dimension D1
and E1 include mold mismatch and are measured at the extreme
material condition at the upper or lower parting line.
3. Lead coplanarity is 0.004" (0.102mm) maximum.
SYMBOL
MIN
NOM
MAX
A
4.191
–
4.572
A1
2.286
–
3.048
A2
0.508
–
–
D
12.319
–
12.573
D1
11.430
–
11.582
E
12.319
–
12.573
E1
11.430
–
11.582
D2/E2
9.906
–
10.922
B
0.660
–
0.813
B1
0.330
–
0.533
e
NOTE
Note 2
Note 2
1.270 TYP
10/04/01
Package Drawing Contact:
[email protected]
14
TITLE
28J, 28-lead, Plastic J-leaded Chip Carrier (PLCC)
DRAWING NO.
REV.
28J
B
Atmel ATF22LV10C(Q)Z
0779M–PLD–7/10
Atmel ATF22LV10C(Q)Z
11.2
24P3 – PDIP
D
PIN
1
E1
A
SEATING PLANE
A1
L
B
B1
e
E
COMMON DIMENSIONS
(Unit of Measure = mm)
C
eC
eB
Notes:
1.
2.
This package conforms to JEDEC reference MS-001, Variation AF.
Dimensions D and E1 do not include mold Flash or Protrusion.
Mold Flash or Protrusion shall not exceed 0.25mm (0.010").
SYMBOL
MIN
NOM
MAX
A
–
–
5.334
A1
0.381
–
–
D
31.623
–
32.131
E
7.620
–
8.255
E1
6.096
–
7.112
B
0.356
–
0.559
B1
1.270
–
1.651
L
2.921
–
3.810
C
0.203
–
0.356
eB
–
–
10.922
eC
0.000
–
1.524
e
NOTE
Note 2
Note 2
2.540 TYP
6/1/04
Package Drawing Contact:
[email protected]
TITLE
24P3, 24-lead (0.300"/7.62mm Wide) Plastic Dual
Inline Package (PDIP)
DRAWING NO.
24P3
REV.
D
15
0779M–PLD–7/10
11.3
24S – SOIC
B
D1
D
PIN 1 ID
PIN 1
e
E
A
COMMON DIMENSIONS
(Unit of Measure = mm)
SYMBOL
A1
0
8
L1
L
MIN
NOM
MAX
A
–
–
2.65
A1
0.10
–
0.30
D
10.00
–
10.65
D1
7.40
–
7.60
E
15.20
–
15.60
B
0.33
–
0.51
L
0.40
–
1.27
L1
0.23
–
0.32
e
NOTE
1.27 BSC
06/17/2002
Package Drawing Contact:
[email protected]
16
TITLE
24S, 24-lead (0.300" body) Plastic Gull Wing Small
Outline (SOIC)
DRAWING NO.
REV.
24S
B
Atmel ATF22LV10C(Q)Z
0779M–PLD–7/10
Atmel ATF22LV10C(Q)Z
11.4
24X – TSSOP
Dimensions in Millimeter and (Inches)*
JEDEC STANDARD MO-153 AD
Controlling dimension: millimeters
0.30(0.012)
0.19(0.007)
4.48(0.176)
6.50(0.256)
4.30(0.169)
6.25(0.246)
PIN 1
0.65(0.0256)BSC
7.90(0.311)
1.20(0.047)MAX
7.70(0.303)
0.15(0.006)
0.05(0.002)
0
0.20(0.008)
8
0.09(0.004)
0.75(0.030)
0.45(0.018)
04/11/2001
Package Drawing Contact:
[email protected]
TITLE
24X, 24-lead (4.4mm body width) Plastic Thin Shrink
Small Outline Package (TSSOP)
DRAWING NO.
REV.
24X
A
17
0779M–PLD–7/10
12.
Revision History
Doc. Rev.
18
Date
Comments
M
07/2010
Atmel ATF22LV10CZ-25JC/JI, PC/PI, SC/SI, XC/XJ leaded parts will become obsolete
L
11/2005
Added Green Package options
Atmel ATF22LV10C(Q)Z
0779M–PLD–7/10
Headquarters
International
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: (+1)(408) 441-0311
Fax: (+1)(408) 487-2600
www.atmel.com
Atmel Asia Limited
Unit 01-5 & 16, 19/F
BEA Tower, Millennium City 5
418 Kwun Tong Road
Kwun Tong, Kowloon
HONG KONG
Tel: (+852) 2245-6100
Fax: (+852) 2722-1369
Atmel Munich GmbH
Business Campus
Parkring 4
D-85748 Garching b. Munich
GERMANY
Tel: (+49) 89-31970-0
Fax: (+49) 89-3194621
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
JAPAN
Tel: (+81) 3-3523-3551
Fax: (+81) 3-3523-7581
Sales Contact
www.atmel.com/contacts
Literature Requests
www.atmel.com/literature
Product Contacts
Technical Support
[email protected]
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF
THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
© 2010 Atmel Corporation. All rights reserved.
Atmel ®, logo and combinations thereof, Everywhere You Are® and others, are registered trademarks or trademarks of Atmel Corporation or its
subsidiaries. Other terms and product names may be trademarks of others.
0779M–PLD–7/10