Features • ATR2740M1 is a Special Version of ATR2740 Recommended for Automotive Applications • Highly Integrated Digital Device for DAB Receivers (Eureka 147) • Utilizes the ARM7TDMI® Core • • • • • • • • • • • • • • – High-performance 32-bit RISC Architecture – High-density 16-bit Instruction Set – Embedded ICE (In-Circuit Emulation) Utilizes TeakDSPCore™ – 16-bit Fixed-point Digital Signal Processing Core DAB OFDM Channel Demodulator and Decoder – Fully Integrated, Supports all DAB Functions and Modes – Full Data Rate of 1.8 Mbit Can Be Decoded – Automatic Mode Detection (AMD) – Digital AFC (Frequency Tolerance < 0.5 Hz for Mode I) – Digital AGC with a Wide Gain Control Range – Demodulation and Decoding of up to 64 UEP/EEP Sub-channels Audio Source Decoder (ASD) and Data Decoder (DD) – On-chip De-interleaver Memory for Full 1.8 Mbit/s Decoding Data Rate – PAD Extraction – Two Independent Data Packet Mode Decoder Integrated High-density SRAM Supporting Time and Frequency De-interleaving 10 Msps High-speed Low-power Pipelined ADC – Supports Wide IF Range of 2.048 MHz to 50 MHz – Complex Bandpass Filtering – Optional SAW Filter Equalization ARM7TDMI Core User Software Extension – Audio Player MP3 Support Large Variety of Interfaces – I2S/SPDIF, SFCO, SSO, RDI, RS-232, USART – Two USARTs Master/Slave SPI Interface – Two Dedicated Peripheral Data Controller (PDC) Channels – 8- to 16-bit Programmable Data Length – Four External Slave Chip Selects Programmable Watchdog Timer Power Management Controller (PMC) – CPU and Peripherals Can Be De-activated Individually – Simple But Comfortable Gearing and Clocking Unit 32 User Programmable I/O Lines (PIO) Low-power Consumption for Portable Applications (3.3V and 1.8V) Robust LQFP128 Package Very Low External Component Count DAB Digital Processing Device ATR2740M1 Summary NOTE: This is a summary document. The complete document is available. For more information, please contact your local Atmel sales office. 4977CS–DAB–10/08 1. Description The ATR2740M1 is a fully integrated processing unit which covers all DAB- (Eureka 147, ETS 300 401) related digital tasks like DAB OFDM demodulation and decoding, audio source decoding, data decoding, as well as time and frequency synchronization. The device consists of a high-performance 32-bit RISC ARM7TDMI core, an additional TeakDSPCore, embedded memories, an analog-to-digital converter (ADC), as well as a DAB channel demodulator and decoder IP, and two independent audio source decoder engines. A large variety of interfaces, including SPI, USART and RDI, are provided. The ATR2740M1 baseband processor is controlled by a standard ARM7TDMI core, which is a very well-known controller. This allows the designers to work with standard tools, which results in reduced development costs and very fast time to market. The ARM7TDMI core is designed to perform the DAB receiver tasks, MMI and further user software extensions such as MP3 decoding or data decoding. The ATR2740M1 is manufactured using Atmel’s high-density CMOS technology. By combining all functions on one SoC (System-on-Chip), including a wide range of peripheral functions on a monolithic chip, the ATR2740M1 provides a highly flexible and cost-effective solution for DAB applications. The advanced Atmel technology and the architecture of the ATR2740M1 enable maximum performance at a very low current consumption. The wide flexibility offered by the ATR2740M1 is due to the large variety of interfaces supported. For control functions, UART and SPI are available. As data interfaces, an SSO, SFCO and RDI, as well as two audio outputs (either I2S or SPDIF), are available. Due to the high integration of the device, the external component count is as low as only two external parts; a simple crystal and a 16-MB flash memory are required to run the full DAB function. All RAM, such as interleaving or program memory, as well as the ADC are incorporated into the device. The part works perfectly together with Atmel’s DAB front-end parts. The processing power available with the ATR2740M1 is sufficient to enable the part to decode the full DAB data rate of 1.8 Mbits. In addition, there is still unused processing power available on the ARM7TDMI controller for customer software. It is easy to run a complete MP3 player without the need to add extra hardware to the device. A complete set of tools for hardware and software, including documentation that allows easy design-in and a fast time to market, is available on request. 2 ATR2740M1 4977CS–DAB–10/08 ATR2740M1 Figure 1-1. Block Diagram ATR2740M1 VINP VINN ADC ADC_DATA VCM DAB Channel Decoder TXRDI SFCO XO Clock Generation Advanced Power Management I2S/SPDIF Signal Processing CORE I2S/SPDIF Watchdog SSO IRQ0 SPI IRQ1 IRQ3 Watchdog Data bus ARM7TDMI System USART1 USART2 RESET Address bus GPIO Control JTAG 3 4977CS–DAB–10/08 2. Absolute Maximum Ratings Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Parameters Symbol Min. –40 +85 °C TStg –60 +150 °C VDD18 –0.3 +1.95 V VDD33 –0.3 +3.6 V Operating free air temperature range for LQFP128 Storage temperature DC supply voltage AVDD DC input voltage Notes: Max. Unit –0.3 +3.6 V –0.3 +1.95 V 1. The part may not survive if all maximums are applied simultaneously. Electrostatic sensitive device. Observe precautions for handling. 3. DC Electrical Characteristics Test conditions (if not otherwise specified): VCC = +1.8V, Tamb = +25° C No. Parameters Test Conditions Pin Symbol Min. Typ. 1.1 DC supply voltage 1.2 Low-level input voltage VDD18 1.65 1.8 VDD18 = 1.65 to 1.95V VIL 1.3 High-level input voltage VDD18 = 1.65 to 1.95V VIH 1.4 Low-level output voltage IOL = 1.5 mA VDD18 = 1.65V VOL 1.5 High-level output voltage IOH = –1.5 mA VDD18 = 1.65V VOH 1.11 Crystal oscillator frequency 1.12 Clock duty cycle 1.14 JTAG TCK frequency Max. Unit Type* 1.95 V D –0.3 +0.3 × VDD18 V D +0.7 × VDD18 VDD18 + 0.3 V D 0.4 V A V A MHz D 1.2 24.576 FTCK 40 60 % D 0.02 33 MHz D *) Type means: A = 100% tested, B = 100% correlation tested, C = Characterized on samples, D = Design parameter 4 ATR2740M1 4977CS–DAB–10/08 ATR2740M1 4. Electrical Characteristics on ADC/IF Input Test conditions (if not otherwise specified): VCC = +3.3V, Tamb = +25° C No. Parameters 2.1 ADC DC supply voltage 2.2 IF frequency range Test Conditions Pin Symbol Min. Typ. Max. Unit Type* AVDD 3 3.3 3.6 V D FIF 2.048 50 MHz D *) Type means: A = 100% tested, B = 100% correlation tested, C = Characterized on samples, D = Design parameter 5. DC Power Consumption Test conditions (if not otherwise specified): VCC = +1.8V, Tamb = +25°C Mode Conditions Typ. Max. Unit Core Power Consumption DAB full Decode of all MSC’s and 1 audio sub-channel 80 mA 5 4977CS–DAB–10/08 6. Ordering Information Extended Type Number Package Remarks ATR2740M1-RQHH LQFP128 16 mm × 16 mm, 0.40 mm pitch, Pb-free, for automotive applications 7. Package Information LQFP128 Package: LQFP 128 (acc. JEDEC OUTLINE No. MS-026) Dimensions in mm 16±0.2 3.5 ˚ ±3.5˚ 14±0.1 12.4 128 1.6 max. 97 0.1±0.05 96 0.16±0.05 0.4 1 33 64 0.6±0.15 65 32 technical drawings according to DIN specifications +0.05 0.15-0.06 Drawing-No.: 6.543-5103.01-4 Issue: 1; 15.09.03 6 ATR2740M1 4977CS–DAB–10/08 ATR2740M1 8. Revision History Please note that the following page numbers referred to in this section refer to the specific revision mentioned, not to this document. Revision No. History 4977CS-DAB-10/08 • USB and CAN parts deleted 4977BS-DAB-06/08 • • • • Put datasheet in a new template All pages and page 1: Preliminary deleted Page 4-5: DC El. Char. Table: some changes Page 5: El. Char. on ADC/IF Input Table: some changes 7 4977CS–DAB–10/08 Headquarters International Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Atmel Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369 Atmel Europe Le Krebs 8, Rue Jean-Pierre Timbaud BP 309 78054 Saint-Quentin-en-Yvelines Cedex France Tel: (33) 1-30-60-70-00 Fax: (33) 1-30-60-71-11 Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Technical Support [email protected] Sales Contact www.atmel.com/contacts Product Contact Web Site www.atmel.com Literature Requests www.atmel.com/literature Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. © 2008 Atmel Corporation. All rights reserved. Atmel ®, Atmel logo and combinations thereof, and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. ARM7TDMI ® is a registered trademark of ARM Ltd. TeakDSPCore ™ is a trademark of DSP Group Inc. Other terms and product names may be trademarks of others. 4977CS–DAB–10/08