COILCRAFT 1008CS

Document 101-1
Chip Inductors – 1008CS Series (2520)
Irms Derating
• High SRF and excellent Q values
• Tight tolerances, many values at 1%
• 39 inductance values from 10 nH to 8.2 µH
120
110
Typical Q vs Frequency
120
100
100
47 nH
90
Q Factor
80
100 nH
12 nH
70
60
330 nH
50
80
70
60
50
40
30
20
750 nH
1800 nH
40
90
25°C
Percent of rated Irms
100
10
0
-40
30
-20
0
40
60
80
100
C
B
overall
10
0
20
120 140
Ambient temperature (°C)
20
10
100
1000
Frequency (MHz)
10000
Pick and
place
material
F
A
Typical L vs Frequency
E
terminal
H
D
I
G
J
F
I
Terminal wraparound:
approx 0.010/0,25 both ends
Recommended
Land Pattern
A B
C
D
max max max ref
E
F
G
H
IJ
0.1150.110 0.0800.0200.0800.0200.0600.1000.0400.050inches
2,922,79 2,030,512,030,511,522,541,021,27
mm
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
Designer’s Kit C300 contains 10 each of all 5% tolerance values
Core material Ceramic
Environmental RoHS compliant, halogen free
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 29.6 – 37.4 mg
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000 per 7″ reel; 7500 per 13″ reel. Plastic tape: 8 mm wide,
0.3 mm thick, 4 mm pocket spacing, 2.0 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 101-1 Revised 01/11/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 101-2
1008CS Series (2520)
Part number1
Inductance2
(nH)
1008CS-100X_L_ 10 @ 50 MHz
1008CS-120X_L_ 12 @ 50 MHz
1008CS-150X_L_ 15 @ 50 MHz
1008CS-180X_L_ 18 @ 50 MHz
1008CS-220X_L_ 22 @ 50 MHz
1008CS-270X_L_ 27 @ 50 MHz
1008CS-330X_L_ 33 @ 50 MHz
1008CS-390X_L_ 39 @ 50 MHz
1008CS-470X_L_ 47 @ 50 MHz
1008CS-560X_L_ 56 @ 50 MHz
1008CS-680X_L_ 68 @ 50 MHz
1008CS-820X_L_ 82 @ 50 MHz
1008CS-101X_L_ 100 @ 25 MHz
1008CS-121X_L_ 120 @ 25 MHz
1008CS-151X_L_ 150 @ 25 MHz
1008CS-181X_L_ 180 @ 25 MHz
1008CS-221X_L_ 220 @ 25 MHz
1008CS-271X_L_ 270 @ 25 MHz
1008CS-331X_L_ 330 @ 25 MHz
1008CS-391X_L_ 390 @ 25 MHz
1008CS-471X_L_ 470 @ 25 MHz
1008CS-561X_L_ 560 @ 25 MHz
1008CS-621X_L_ 620 @ 25 MHz
1008CS-681X_L_ 680 @ 25 MHz
1008CS-751X_L_ 750 @ 25 MHz
1008CS-821X_L_ 820 @ 25 MHz
1008CS-911X_L_ 910 @ 25 MHz
1008CS-102X_L_
1000 @ 25 MHz
1008CS-122X_L_
1200 @ 7.9 MHz
1008CS-152X_L_
1500 @ 7.9 MHz
1008CS-182X_L_
1800 @ 7.9 MHz
1008CS-222X_L_
2200 @ 7.9 MHz
1008CS-272X_L_
2700 @ 7.9 MHz
1008CS-332X_L_
3300 @ 7.9 MHz
1008CS-392X_L_
3900 @ 7.9 MHz
1008CS-472X_L_
4700 @ 7.9 MHz
1008CS-562XJL_
5600 @ 7.9 MHz
1008CS-682XJL_
6800 @ 7.9 MHz
1008CS-822XJL_
8200 @ 2.5 MHz
SRF min5
DCR max6 Irms7Color
Percent
Q min4
(MHz) (Ohms)(mA) code8
tolerance3
5,2
5,2
5,2
5,2
5,2,1
5,2
5,2
5,2
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5
5
5
1. When ordering, specify tolerance, termination and packaging codes:
1008CS-472XJLC
Tolerance: F =1% G = 2% J = 5%
(Table shows stock tolerances in bold.)
Termination:L=RoHS compliant silver-palladium-platinum-glass frit.
E=Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 per full reel).
B =Less than full reel. In tape, but not machine-ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 per full
reel).
50 @ 500 MHz
50 @ 500 MHz
50 @ 500 MHz
50 @ 350 MHz
55 @ 350 MHz
55 @ 350 MHz
60 @ 350 MHz
60 @ 350 MHz
65 @ 350 MHz
65 @ 350 MHz
65 @ 350 MHz
60 @ 350 MHz
60 @ 350 MHz
60 @ 350 MHz
45 @ 100 MHz
45 @ 100 MHz
45 @ 100 MHz
45 @ 100 MHz
45 @ 100 MHz
45 @ 100 MHz
45 @ 100 MHz
45 @ 100 MHz
45 @ 100 MHz
45 @ 100 MHz
45 @ 100 MHz
45 @ 100 MHz
35 @ 50 MHz
35 @ 50 MHz
35 @ 50 MHz
28 @ 50 MHz
28 @ 50 MHz
28 @ 50 MHz
22 @ 25 MHz
22 @ 25 MHz
20 @ 25 MHz
20 @ 25 MHz
16 @ 7.9 MHz
18 @ 7.9 MHz
18 @ 7.9 MHz
4100
3300
2500
2500
2400
1600
1600
1500
1500
1300
1300
1000
1000
950
850
750
700
600
570
500
450
415
375
375
360
350
320
290
250
200
160
160
140
110
100
90
20
40
25
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.18
0.20
0.22
0.56
0.63
0.70
0.77
0.84
0.91
1.05
1.12
1.19
1.33
1.40
1.47
1.54
1.61
1.68
1.75
2.0
2.3
2.6
2.8
3.2
3.4
3.6
4.0
4.0
4.9
6.0
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
650
650
580
620
500
500
450
470
470
400
300
400
360
400
380
370
310
330
300
280
290
290
260
260
240
200
170
Black
Red
Orange
Yellow
Blue
Black
Orange
Violet
Red
Yellow
Gray
Red
Violet
White
Red
Orange
Green
White
Orange
Blue
Black
Green
Blue
Gray
Black
Brown
Red
Yellow
Blue
Gray
Brown
Orange
Green
Violet
Gray
White
Black
Brown
Red
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Aglilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF840 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Current production parts are marked with one dot. Prior production
parts were marked with three dots. Part marking does not indicate
polarity.
9. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 101-2 Revised 01/11/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.