Document 104-1 Chip Inductors – 1206CS Series (3216) Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com. • High SRF and excellent Q values • Tight tolerances, many values at 1% • 31 inductance values from 3.3 to 1200 nH Part number1 Inductance2 (nH) 1206CS-030X_L_3.3 @100 MHz 1206CS-060X_L_6.8 @100 MHz 1206CS-100X_L_10 @100 MHz 1206CS-120X_L_12 @100 MHz 1206CS-150X_L_15 @100 MHz 1206CS-180X_L_18 @100 MHz 1206CS-220X_L_22 @100 MHz 1206CS-270X_L_27 @100 MHz 1206CS-330X_L_33 @100 MHz 1206CS-390X_L_39 @100 MHz 1206CS-470X_L_47 @100 MHz 1206CS-560X_L_56 @100 MHz 1206CS-680X_L_68 @100 MHz 1206CS-820X_L_82 @100 MHz 1206CS-101X_L_100 @100 MHz 1206CS-121X_L_120 @100 MHz 1206CS-151X_L_150 @100 MHz 1206CS-181X_L_180 @50 MHz 1206CS-221X_L_220 @50 MHz 1206CS-271X_L_270 @50 MHz 1206CS-331X_L_330 @50 MHz 1206CS-391X_L_390 @50 MHz 1206CS-471X_L_470 @50 MHz 1206CS-561X_L_560 @35 MHz 1206CS-621X_L_620 @35 MHz 1206CS-681X_L_680 @35 MHz 1206CS-751X_L_750 @35 MHz 1206CS-821X_L_820 @35 MHz 1206CS-911X_L_910 @35 MHz 1206CS-102X_L_1000 @35 MHz 1206CS-122X_L_1200 @35 MHz Percent SRF min5 DCR max6 Irms7 tolerance3 Q min4 (MHz)(Ohms) (mA) 5 30 @ 300 MHz 5 30 @ 300 MHz 5 40 @ 300 MHz 5,2 40 @ 300 MHz 5,2 40 @ 300 MHz 5,2 50 @ 300 MHz 5,2 50 @ 300 MHz 5,2 50 @ 300 MHz 5,2 55 @ 300 MHz 5,2 55 @ 300 MHz 5,2 55 @ 300 MHz 5,2,1 55 @ 300 MHz 5,2,1 55 @ 300 MHz 5,2,1 55 @ 300 MHz 5,2,1 55 @ 300 MHz 5,2,1 60 @ 300 MHz 5,2,1 60 @ 300 MHz 5,2,1 60 @ 300 MHz 5,2,160 @ 300 MHz 5,2,155 @ 300 MHz 5,2,145 @ 150 MHz 5,2,145 @ 150 MHz 5,2,145 @ 150 MHz 5,2,145 @ 150 MHz 5,2,145 @ 150 MHz 5,2,145 @ 150 MHz 5,2,145 @ 150 MHz 5,2,145 @ 150 MHz 5,2,145 @ 150 MHz 5,2,145 @ 150 MHz 5,2,145 @ 150 MHz 1. When ordering, specify tolerance, termination and packaging codes: 1206CS-122XJLC Tolerance: F =1% G = 2% J = 5% (Table shows stock tolerances in bold.) Termination:L=RoHS compliant silver-palladium-platinum-glass frit. E=Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 6200 5500 4000 3200 3200 2800 2200 1800 1800 1800 1500 1450 1200 1200 1100 1100 950 900 760 730 650 600 550 470 470 450 440 420 410 400 380 0.050 0.070 0.080 0.080 0.100 0.100 0.100 0.110 0.110 0.120 0.130 0.140 0.260 0.210 0.260 0.260 0.310 0.430 0.500 0.560 0.620 0.750 1.30 1.34 1.58 1.58 2.25 1.82 2.95 2.80 3.20 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 900 900 850 800 750 700 670 630 590 530 490 460 460 430 320 400 310 320 300 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology Micro-ohmmeter and a Coilcraft CCF840 fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Refer to Doc 174 “Color Coding” for the explanation of color dots. Document 104-1 Revised 10/12/15 Document 104-2 1206CS Series (3216) Typical Q vs Frequency Typical L vs Frequency 120 100 1200 nH 33 nH 90 1000 70 Inductance (nH) 150 nH 80 Q Factor 10000 3.3 nH 15 nH 110 680 nH 60 330 nH 50 40 30 560 nH 150 nH 100 47 nH 18 nH 10 3.3 nH 20 10 0 1 10 100 1000 10000 Frequency (MHz) H D Pick and place material F A E terminal I G J F I Recommended Land Pattern Terminal wraparound: approx 0.015/0,38 both ends A max B max C max D ref E F G 10 100 1000 Frequency (MHz) C B overall 1 H IJ 0.1400.085 0.060 0.0200.0560.0200.0800.0760.0400.070 3,562,16 1,52 0,511,420,512,031,931,021,78 Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. Designer’s Kit C320 contains 10 each of all 5% values Core material Ceramic Environmental RoHS compliant, halogen free optional Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 19.5 – 23.0 mg Ambient temperature –40°C to +125°C with Irms current Maximum part temperature +140°C (ambient + temp rise). Storage temperature Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000/7″ reel; 7500/13″ reel. Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Document 104-2 Revised 10/12/15