SAW Components SAW Duplexer LTE Band 20 Series/type: Ordering code: B7679 B39851B7679A710 Date: Version: December 14, 2010 2.0 EPCOS AG 2010. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B7679 847.0 / 806.0 MHz SAW Duplexer Data sheet Application Low-loss SAW duplexer for LTE Band 20 systems Low insertion attenuation Low amplitude ripple Usable passband 30 MHz Single-ended to balanced transformation in Antenna-Rx path ■ Impedance transformation 50 Ω to 100 Ω in Antenna-Rx path ■ Very small size and low height ■ ■ ■ ■ ■ 6 7 9 3 2 8 4 5 0.4 0.4 0.55 0.3 Package size 2.5 * 2.0 * 0.68 mm3 RoHS compatible Approximate weight 0.013 g Package for Surface Mount Technology (SMT) Ni, Au-plated terminals Electrostatic Sensitive Device (ESD) Moisture Sensitivity Level 3 1 bottom view 0.9 0.68 ■ ■ ■ ■ ■ ■ ■ 0.4 Features side view 2.0 2.5 top view Pin configuration ■ ■ ■ ■ 3 1, 8 6 2, 4, 5, 7, 9 Tx input Rx output (balanced) Antenna To be grounded 1 3 8 4,5,9 2,7 6 Please read cautions and warnings and important notes at the end of this document. 2 December 14, 2010 SAW Components B7679 847.0 / 806.0 MHz SAW Duplexer Data sheet Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = -30 ˚C to +85 ˚C ZTx = 50 Ω ZAnt = 50 Ω || 8.2 nH ZRx = 100 Ω (balanced) || 56 nH Characteristics Tx-Antenna min. Center frequency fc Maximum insertion attenuation 832.1 ... 861.9 MHz1) α 836.1 ... 857.9 MHz 832.1 ... 861.9 MHz Amplitude ripple (p-p) 832.1 ... 832.1 ... typ. @ 25 ˚C 847.0 max. 2.7 3.0 CTQ dB 2.2 2.9 dB 2.7 3.4 dB 1.4 1.8 dB 1.4 2.2 dB 2.6 6.0 % 10 16 % MHz ∆α 861.9 MHz2) 861.9 MHz Error Vector Magnitude 5 MHz Channel @ fCarrier EVM 834.6...859.4MHz3) 20 MHz Channel @ fCarrier 842.1...851.9MHz4) Input VSWR (Tx port) 832.0 ... 862.0 MHz 1.8 2.1 Output VSWR (Ant Port) 832.0 ... 862.0 MHz 1.9 2.1 1) 2) 3) 4) in 0C-60C temperature range in 0C-60C temperature range Computed with 4 MHz square signal Computed with 18 MHz square signal Please read cautions and warnings and important notes at the end of this document. 3 December 14, 2010 SAW Components B7679 847.0 / 806.0 MHz SAW Duplexer Data sheet Characteristics Tx-Antenna Absolute attenuation 0.3 791.1 820.0 873.0 875.0 1560.0 1654.0 2400.0 2476.0 3298.0 4000.0 4500.0 5000.0 min. typ. @ 25 ˚C 35 45 43 15 35 30 35 30 30 30 20 10 5 38 52 60 45 50 55 55 40 40 38 30 20 12 max. α ... ... ... ... ... ... ... ... ... ... ... ... ... 791.0 820.0 820.9 875.0 903.0 1590.0 1734.0 2483.0 2606.0 3478.0 4500.0 5000.0 6000.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Please read cautions and warnings and important notes at the end of this document. 4 December 14, 2010 dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B7679 847.0 / 806.0 MHz SAW Duplexer Data sheet Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = -30˚C to +85 ˚C ZTx = 50 Ω ZAnt = 50 Ω || 8.2 nH ZRx = 100 Ω (balanced) || 56 nH Characteristics Antenna-Rx min. Center frequency fc Maximum insertion attenuation 791.1 ... 793.0 MHz1) α 793.0 ... 820.9 MHz2) 791.1 ... 820.9 typ. @ 25 ˚C 806.0 max. 2.6 4.0 CTQ dB 2.6 3.5 dB 2.6 4.0 dB MHz MHz α Amplitude ripple 791.1 ... 820.9 MHz3) 1.4 2.7 dB 791.1 ... 820.9 1.4 2.7 dB 3.1 8 % 6.2 16 % MHz Error Vector Magnitude 5 MHz Channel @ fCarrier 793.6 ...818.4MHz4) 20 MHz Channel @ fCarrier 801.1 ...810.9 MHz5) Input VSWR (Ant port) 791.0 ... 821.0 MHz 1.7 2.1 Output VSWR (Rx Port) 791.0 ... 821.0 MHz 1.8 2.1 Common mode rejection ratio 791.0 ... 821.0 MHz 1) 2) 3) 4) 5) 23 in 0C-60C temperature range in 0C-60C temperature range in 0C-60C temperature range Computed with 5 MHz square signal Computed with 18 MHz square signal Please read cautions and warnings and important notes at the end of this document. 5 December 14, 2010 25 dB SAW Components B7679 847.0 / 806.0 MHz SAW Duplexer Data sheet Characteristics Antenna-Rx Absolute attenuation 0.3 832.1 833.0 873.0 1000.0 3000.0 min. typ. @ 25 ˚C 40 41 47 41 40 30 53 50 51 48 50 45 min. typ. @ 25 ˚C MHz MHz MHz 48 46 47 54 58 55 dB dB dB 49 55 dB 53 63 dB α ... 750.0 ... 833.0 ... 862.0 ... 903.0 ... 3000.0 ... 6000.0 MHz MHz MHz MHz MHz MHz Characteristics Tx-Rx Differential mode isolatipn 791.1 ... 820.0 820.0 ... 820.9 832.1 ... 833.0 833.0 max. dB dB dB dB dB dB max. α ... 861.9 MHz Common mode isolation 832.1 ... 861.9 MHz α Please read cautions and warnings and important notes at the end of this document. 6 December 14, 2010 SAW Components B7679 847.0 / 806.0 MHz SAW Duplexer Data sheet Maximum Ratings Storage temperature range DC voltage ESD voltage ESD voltage ESD voltage Input power at Tx Port 834.5 ...859.5 MHz elsewhere 1) 2) 3) Tstg VDC VESD VESD VESD Pin Pin –40/+85 5 5001) 2502) 1003) 28 10 ˚C V V V V dBm dBm CD model, 3 pulses HB model, 1 pulse M model, 1 pulse } LTE uplink signal 55 ˚C, 50000h According to JESD22-C101 (Charged Device model), 3 negative and 3 positive pulses. According to JESD22-A114E (Human Body model), 1 negative and 1 positive pulses. According to JESD22-A115A (Machine model), 1 negative and 1 positive pulses. Matching network (element values depend on PCB layout Lp1 = 8.2 nH, Lp2 = 56 nH Lp1 Lp2 Please read cautions and warnings and important notes at the end of this document. 7 December 14, 2010 SAW Components B7679 847.0 / 806.0 MHz SAW Duplexer Data sheet Frequency Response TX-ANT Frequency Response TX-ANT Please read cautions and warnings and important notes at the end of this document. 8 December 14, 2010 SAW Components B7679 847.0 / 806.0 MHz SAW Duplexer Data sheet Frequency Response ANT-RX Frequency Response ANT-RX Please read cautions and warnings and important notes at the end of this document. 9 December 14, 2010 SAW Components B7679 847.0 / 806.0 MHz SAW Duplexer Data sheet Frequency Response TX-RX Frequency Response TX-RX Please read cautions and warnings and important notes at the end of this document. 10 December 14, 2010 SAW Components B7679 847.0 / 806.0 MHz SAW Duplexer Data sheet S11 VSWR (TX) S22 VSWR (ANT) S33 VSWR (RX) Please read cautions and warnings and important notes at the end of this document. 11 December 14, 2010 SAW Components B7679 847.0 / 806.0 MHz SAW Duplexer Data sheet References Type B7679 Ordering code B39851B7679A710 Marking and package C61157-A3-A61 Packaging F611074-V8153-Z000 Date codes L_1126 S-parameters B7679_NB.S4P B7679_WB.S4P Soldering profile S_6001 RoHS compatible Defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2010. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 12 December 14, 2010 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 13 December 14, 2010