BTCPOWER BAO100-PAC-5

BTCPower
BAO100 Series
Broadband TelCom Power, Inc.
TM
Redefining “Current” Limits In Power Conversion
100W Open Frame AC-DC Power Modules with PFC
•
•
•
•
•
•
•
•
Universal Input 90-264 Vac
PFC function
PCB Mountable
Efficiency to 85% Typical
Industry Standard Pin Out
100 % full load burn-in test
ISO-9001 certified manufacturer
Short circuit / overload / over voltage
protection
• Approvals: UL / TUV / CE
Specifications
Input voltage range………………………………………………………………..90-264 Vac
Input frequency………….…………………………………………………………47 – 63 Hz
Inrush current………………………………………………………………………Cold start, 25A / 155Vac, 50A / 230Vac
Output voltage….…………………………………………………………………..Refer to below table
Initial Accuracy ………………………………………………………………….. ±1.0% max.
Temperature Coefficient ………………………………………………………….±0.05% / ºC
Ripple & Noise, 20Mhz BW ………………………………………….…………. 50mVp-p, max @ 3.3/5Vo; 1%p-p,max @
other output voltage modules
Hold-up time ¹ ……………………………………………………………………..8ms typ.
Short circuit protection……………...………………………………………….…Continuous
Line regulation ² .………………………………………………………………….±0.05% max.
Load regulation ³ …………………………………………………………….……±1.0% max.
Efficiency ………..…..…………………………………………………………….Refer to below table
Isolation Voltage (Input/Output) ………………………………………………...4242 Vac
Operating temp. range ……………………………………………………….…..0 ºC – 40 ºC
Storage temp. range ………………………..……………………………………-20 ºC – +85 ºC
Cooling………………………………………………………………………………Free air convection
Part No
Output
Tolerance
Ripple (max.)
Efficiency
BAO100- PAC-5
5V, 20A
BAO100- PAC-9
9V, 11.2A
+/ - 1 %
50 mV
75%
+/ - 1 %
90 mV
79%
BAO100- PAC-12
12V, 8.4A
+/ - 1 %
120 mV
83%
BAO100- PAC-15
15V, 6.7A
+/ - 1 %
150 mV
85%
BAO100- PAC-18
18V, 5.6 A
+/ - 1 %
180 mV
86%
BAO100- PAC-24
24V, 4.2A
+/ - 1 %
240 mV
87%
BAO100- PAC-48
48V, 2.1A
+/ - 1 %
480 mV
87%
BTCPower
TM
Note:
1.
2.
3.
4.
5.
Measured at Vin = 115 Vac, Full load
Measured from high line to low line
Measured from full load to 10% load
BAO100 input connector mates with Molex 5277 or equivalent.
BAO100 output connector mates with Molex 5273 or equivalent.
MECHANICAL DRAWING
DC output pin 1,2,3,4: Vo (+)
DC output pin 5,6,7,8: Vo (-)
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Pg. 2.
Tel.: 714-259-4888 • Fax: 714-259-0840 • www.btcpower.com • Email: [email protected] AC/DC BAO100 PS Ver1 5-7-04