BTCPower TM Broadband TelCom Power, Inc. Redefining “Current” Limits In Power Conversion 4BESeries 10W DC-DC Converters Features • • • • • • • 10W Isolated Output 2:1 Input Range 82% Efficiency Pi Input Filter Low Ripple and Noise Continuous Short Circuit Protection Conductive EMI Meet EN55022 Class A Model Number 4BE-01 4BE-02 4BE-03 4BE-04 4BE-05 4BE-06 Input Voltage Output Voltage Output Current Min. Max. Input Current No Load Full Load % Efficiency 5 VDC 12 VDC 15 VDC ±12 VDC ±15 VDC ±5 VDC 100 mA 45 mA 35 mA ±25 mA ±20 mA ±50 mA 2000 mA 830 mA 666 mA ±415 mA ±333 mA ±1000 mA 30 30 30 40 40 40 mA mA mA mA mA mA 1100 mA 1065 mA 1065 mA 1065 mA 1065 mA 1065 mA 76 78 78 78 78 78 5 VDC 12 VDC 15 VDC ±12 VDC ±15 VDC ±5 VDC 100 mA 45 mA 35 mA ±25 mA ±20 mA ±50 mA 2000 mA 830 mA 666 mA ±415 mA ±333 mA ±1000 mA 20 20 20 20 20 20 mA mA mA mA mA mA 535 mA 520 mA 520 mA 520 mA 520 mA 520 mA 78 80 80 80 80 80 5 VDC 12 VDC 100 mA 45 mA 2000 mA 830 mA 10 mA 10 mA 260 mA 254 mA 80 82 35 mA ±25 mA 666 mA ±415 mA 82 254 mA 82 4BE-25 ±15 VDC ±20 mA ±333 mA 254 mA 82 4BE-26 ±5 VDC ±50 mA ±1000 mA 10 mA 10 mA 10 mA 10 mA 254 mA 4BE-24 15 VDC ±12 VDC 254 mA 82 4BE-11 4BE-12 4BE-13 4BE-14 4BE-15 4BE-16 9-18DC 18-36 VDC 4BE-21 4BE-22 4BE-23 36-72 VDC Case B B B Note: Nominal Input Voltage 12, 24, 28 or 48VDC Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS LP 4BE Rev2 16-1-04 4BE Series 10W DC-DC Converters BTCPower TM Specifications Input Specifications: Input Voltage Range…………………….12V…………..………..9-18V 24V……………..……18-36V 48V…………………..36-72V Input Filter………………………………………………………..Pi Type Output Specifications: Voltage Accuracy……………Single output…...……….+/- 1.0 % max. Dual (+/-) output… ….+/- 1.0 % max. Voltage Balance ( Dual )………………………………...+/- 1.0 % max. Transient Response Single 25% Step Load Change…………………………….<500ìsec. Dual FL. 1/2L+/-1% Error Band…………………………….<500ìsec Ripple & Noise, 20 MHz BW………………………. 100 mV p-p max. Temperature Coeffcient………………………… +/- 0.02 % / ºC max. Short Circuit Protection………………………………..……Continuous Line Regulation ¹ Single / Dual Output………….……..+/- 0.2 % max. Load Regulation ² Single / Dual Output……………...….+/- 1 % max. General Specifications : Efficiency………………………………………………..……...see table Isolation Voltage….…………………………………………500VDCmin Isolation Resistance………………………………………….100Mohm Switching Frequency……………………………………..200 KHz, min. Operating Temperature Range…………………………-25ºC ~ +71ºC Case Temperature………………………………………….100 ºC max. Cooling……………………………………………….Free air convection Storage Temperature Range……………………..…..-40 ºC ~ +100ºC EMI / RFI…………………………………………………..Six sied shield Dimensions………………..……2” x 1” x 0.4“ (50.8 x 25.4 x 10.2 mm) Case Material………………………………..Black Coated Copper with Non-conducted base Note: 1. Measured from high line to low line; 2. Measured from full load to ¼ load; 3. Minimum load on the output is necessary to maintain regulation Outline Information and Pin-out PIN CONNECTION Pin Function 1 + Input 2 - Input 3 + Output 4 Common / NP 5 - Output * NP---No Pin On Single Output All dimensions are in inches [mm] The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS LP 4BE Rev2 16-1-04