FI GE HIGH PERFORMANCE IEC SERIES CONNECTOR FILTERS SPECIFICATIONS INTRODUCTIONS 1. A high performance general purpose filter with an IEC connector providing effective EMI suppression. 2. Bleeder resistor can be added for "G3E", "W3E", "G3S" & "G3C" types with suffix "-R" on part numbers. 3. Safety Approval: EG3H, EW3V: UL, CSA, VDE & SEV EG3V & EG3Q: UL, CSA & VDE HG3J: UL, CSA, VDE & SEMKO 20GE: UL, CSA & VDE 4. With optional Y-Cap 3300pF. ELECTRICAL SCHEMATIC PART NO. Cx (uF) 01GEEG3E/W3E/-R 01GEEG3H/G3V/W3V 01GEEG3S/-R 03GEEG3E/W3E/W3ES/-R 03GEEW3ES/-R 03GEEG3H/G3V/W3V 03GEEG3S/-R 03GEEG3Q/W3Q-R 03GEEW3J 0.1 03GEHG3J 06GEEG3E/W3E/W3ES/-R 06GEEG3H/G3V/W3V 06GEEG3S/-R 06GEEG3Q/W3Q-R 10GEEG3C/W3C/-R 10GEEG3E/W3E/W3ES/-R 10GEEG3S/-R *10GEEG3Q/W3Q/-R **15GEEG3E/W3E/-R ***20GEEG3E/W3E/-R UL, CSA approved to 4A 115/250V UL, CSA approved to 8A 115/250V VDE approved to 8A/250V L (mH) 6.5 3 10.5 Cy (pF) 2200 3300 2200 2.5 0.8 L I N E 1M 2200 1M approved to 13A 115/250V * UL, CSA approved to 10A/250V ** VDE VDE approved to 16A/250V *** DIFF. MODE DIFF. MODE 40 dB 20 dB 20GEEG3E 1M COMMON MODE 10M DIFF. MODE 80 dB 60 dB 40 dB 20 dB 0 dB 10K 100K 1M N' G' COMMON MODE (L-G) IN 50 OHM SYSTEM CURRENT FREQUENCY-MHz RATING .15 .50 1.0 5.0 10 1A(E)(S) 28 35 38 38 40 1A(H) 26 36 44 54 55 1A(G3V) 20 30 35 40 40 1A(W3V) 24 35 42 50 55 3A(E)(S)(Q) 20 25 30 38 40 3A(H) 24 30 38 50 55 3A(G3J,W3J) 20 25 30 38 40 3A(G3V)(W3V) 20 29 36 48 46 6A(E)(S) 12 18 24 35 40 6A(H) 15 25 32 45 50 6A(Q) 15 20 20 35 40 6A(G3V)(W3V) 14 23 30 42 35 10A(E)(S) 4 10 13 28 35 10A(C) 10 15 15 25 30 10A(Q) 10 12 15 30 32 15A(E) 4 10 13 28 35 20A 8 10 15 25 30 60 dB 100K Cy MINIMUM INSERTION LOSS IN dB 1M 3300 80 dB 10K L L' L O A D 1M 0.3 0.2 0.3 COMMON MODE COMMON MODE R 2200 1.05 1.5 0.4 0.2 Cy Cx N G 3300 4 2.4 L R( ) 1M INSERTION LOSS (TYPICAL) 0 dB IEC INLET FILTERS 1. Maximum leakage current each line-to-ground @ 115VAC 60Hz: 0.25mA @ 250VAC 50Hz: 0.45mA 2. Hipot rating (one minute) line-to-ground: 2250VDC line-to-line: 1450VDC 3. Operating frequency: 50/60Hz 4. Rated voltage: 115/250VAC COMPONENTS 03GEEG3E 06GEEG3E V D E 10M 2-4 30 40 55 40 55 40 55 40 50 40 50 55 40 40 35 45 40 35 PANEL PCB ASSEMBLY FROM FRONT SUGGESTED MOUNTING CUTOUT (MOUNTING FROM FRONT) MECHANICAL CONSTRUCTION 2.05 1.575 0.005 40.01 52.1 0.130 1.575 0.02 40.01 N 21.6 L 0.85 -0 +0.02 3.3 M3 G R0.12 R3.0 +0.02 1.12 -0 1.12 EG3E, EG3Q IEC INLET FILTERS 1.95 49.5 2.10 53.3 38.6 1.52 28.45 (Optional soldering lug or wire type) 0.84 21.3 28.4 1.99 50.5 1.575 0.130 3.3 40.01 L 0.84 21.3 N G 1.575 0.005 40.01 +0.02 0.85 -0 21.6 34.0 1.34 45.46 1.94 49.27 1.79 +0.02 1.12 -0 28.45 M3 EG3S 0.079(3X) R0.12 (4X) 1.12 28.4 2.0 3.0 1.575 0.02 40.01 G N 1.18 30.0 1.99 50.5 L 0.13 3.3 SUGGESTED MOUNTING CUTOUT (MOUNTING FROM FRONT) 1.55 39.4 +0.012 0.835 -0 21.21 0.83 21.1 EG3H R0.098 R2.49 1.575 0.005 40.01 1.97 50.04 M3 +0.02 R0.04 1.0 1.20 -0. 30.5 G L 1.99 50.5 1.18 30.0 1.55 39.4 1.5750.02 40.01 N 0.13 3.3 SUGGESTED MOUNTING CUTOUT (MOUNTING FROM BEHIND) 0.83 21.1 0.90 0.004 22.9 1.575 0.005 40.01 EG3V 0.14 3.5 +0.02 1.20 -0 30.5 R0.234 R5.94 0.13 3.3 BROWN G G N 1.99 50.5 1.18 30.0 1.5750.02 40.01 L 3 GREEN/YELLOW 4 BLUE 0.83 21.1 1.55 39.4 SUGGESTED MOUNTING CUTOUT (SAME AS ABOVE) EW3V ALL WIRE LEADS 4.0" LONG MIN. 2-5 UNIT: INCH mm PANEL PCB ASSEMBLY FROM FRONT 0.130 1.67 42.3 0.24 6.0 3.3 SUGGESTED MOUNTING CUTOUT (MOUNTING FROM FRONT) 1.77 45.0 EW3J 21.6 0.85 -0 +0.02 21.3MAX 0.84MAX 1.575 0.005 40.01 M3 R0.12 R3.0 +0.02 1.12 -0 28.45 1.99 MAX. 50.5 MAX. 0.13(2X) 1 2 5 21.3MAX. 3.3 0.84MAX. 1.575 0.02 40.0 10.5 R0.12 R3.0 +0.02 1.12 -0 28.45 21.6 0.85 0.004 BLUE G/Y BROWN M3 0.1 40.0 10.13 1.425 36.2 1.45 MAX. 36.8 MAX. 1.575 0.005 +0.5 -0 SUGGESTED MOUNTING CUTOUT EW3ES 0.14 0.12 3.5 3.0 1.56 39.5 0.88 22.3 0.44 11.15 1.95 49.5 0.02 0.5 40.0 1.18 1.575 1.23 31.25 20.5 0.81 0.42 10.6 30.0 0.94 24.0 1.6 HG3J 0.87 0.08 22.0 2.0 R0.236(4X) R6.0(4X) 1.654 0.004 42.0 0.1 +0.02 1.043-0 +0.5 26.5-0 1.04 MAX. 26.5 MAX. R0.157 MAX. R4.0 MAX. ALL WIRE LEADS 4.0" LONG MIN. 2-6 0.138 3.5 1.654 42.0 2.09 53.0 1.36 MAX. 34.5 MAX. 0.138 3.5 3.19 MAX. 81.0 MAX. 20GEEG3E (Optional wire type) 0.142 0.007 3.6 0.2 1.2 0.004 30.5 0.1 1.18 30.0 2.60 MAX. 66.0 MAX. 0.248X0.031 6.3X0.8 22.8 60.1 1.575 0.004 40.0 0.1 0.9 0.004 0.06 SUGGESTED MOUNTING CUTOUT (MOUNTING FROM BEHIND) M3 +0.5 34.5-0 +0.02 1.358-0 SUGGESTED MOUNTING CUTOUT (MOUNTING FROM REVERSE) UNIT: INCH mm IEC INLET FILTERS L G N 49.5 1.575 0.02 40.0 0.5 1.95 MECHANICAL CONSTRUCTION