SWITCH CONNECTOR FILTERS V D E SPECIFICATIONS INTRODUCTIONS 1. Designed as a general purpose filter with a switch effective EMI supression for both common and differential mode noise. 2. With optional resistor and 3300pF/1000pF COMPONENTS PART NO. Cx (uF) L (mH) Cy (pF) R (M ) Lg (mH) 03BEEG3G/NG3G 2200 03BEEG3GM/NG3GM 2.4 03BEEG3GA/NG3GA 2200 0.12 06BEEG3G/NG3G 2200 06BEEG3GM/NG3GM 0.1 0.8 1.0 06BEEG3GA/NG3GA 2200 0.12 10BEEG3G/NG3G 2200 10BEEG3GM/NG3GM 0.3 10BEEG3GA/NG3GA 2200 0.12 1. Maximum leakage current each line-to-ground @ 115VAC 60Hz: 0.25mA @ 250VAC 50Hz: 0.45mA 2. Hipot rating (one minute) line-to-ground: 2250VDC line-to-line: 1450VDC 3. Operating frequency: 50/60Hz 4. Rated voltage: 115/250VAC ELECTRICAL SCHEMATIC SW L N G A: with ground choke M: medical type L I N E R L' C2 C1 L O A D L C2 MINIMUM INSERTION LOSS IN dB N' G' R: OPTION L 30 35 5 35 10 35 10 N SW L I N E R C2 C1 L C2 Lg G L' L O A D N' G' 3GA ONLY R0.098(8X) 1.417 36.0 1.614 41.0 38.3 REF. R2.5(8X) 40 20 40 20 35 20 1.50 REF. M3 MECHANICAL CONSTRUCTION 1.713 REF. 43.5 REF. R0.14 R3.5 1.122 0.004 28.5 0.1 COMMON MODE (L-G) IN 50 OHM SYSTEM CURRENT FREQUENCY-MHz RATING .15 .50 1.0 5.0 10 3A (G) (A) 20 30 35 35 35 3A (M) 20 30 35 20 15 6A (G) (A) 10 20 25 35 40 6A (M) 10 20 20 20 15 10A (G) (A) 5 10 20 30 35 10A (M) 5 10 10 15 15 DIFFERENTIAL MODE (L-L) IN 50 OHM SYSTEM 3A (G) (A) 4 10 20 35 35 3A (M) 5 15 20 30 30 6A (G) (A) 4 10 10 35 35 6A (M) 4 10 15 25 25 10A (G) (A) 5 10 20 30 35 10A (M) 4 10 10 20 20 0.417 0.004 36.00 0.1 BESERIES 2.146 REF. 54.5 REF. SUGGESTED MOUNTING CUTOUT (MOUNTING FROM FRONT) 1.535 0.004 39.0 0.1 2.264 REF. 57.5 REF. BEEG3G 1.22 0.004 31.0 0.1 R0.098(8X) 1.614 41.0 38.3 REF. 1.50 REF. R2.5(8X) BENG3G 1.713 REF. 43.5 REF. BEEG3G 2.146 REF. 54.5 REF. 1.563 0.004 39.70 0.1 2.264 REF. 57.5 REF. BENG3G 4-10 28.25 0.1 1.1120.0 04 R0.14 R3.5 SUGGESTED MOUNTING CUTOUT (MOUNTING FROM FRONT) Suggested thickness of mounting panel is from 0.04(1.0) to 0.63(1.6) inch(mm) of mounting cutout UNIT: INCH mm