HIGH PERFORMANCE IEC SERIES CONNECTOR FILTERS SPECIFICATIONS IEC INLET FILTERS INTRODUCTIONS 1. A high performance general purpose filter with an IEC connector providing effective EMI suppression. 2. Bleeder resistor can be added with suffix "-R" on part numbers, except "G3H","G3V","W3V","G3J","W3J",types. 3. All part numbers are UL recognized, CAS certified and VDE approved. 4. With optional Y-Cap from 100pF to 3300pF. 1. Maximum leakage current each line-to-ground @ 115VAC 60Hz: 0.25mA @ 250VAC 50Hz: 0.45mA 2. Hipot rating (one minute) line-to-ground: 2250VDC line-to-line: 1450VDC 3. Operating frequency: 50/60Hz 4. Rated voltage: 115/250VAC ELECTRICAL SCHEMATIC COMPONENTS PART NO. 01GEEG3E/W3E/-R 01GEEG3H/G3V/W3V 01GEEG3S/-R 03GEEG3E/W3E/W3ES/-R 03GEEG3U/-R 03GEEW3ES/-R 03GEEG3H/G3V/W3V 03GEEG3S/-R 03GEEG3Q/W3Q-R 03GEEW3J 03GEHG3J 06GEEG3E/W3E/W3ES/-R 06GEEG3U/-R 06GEEG3H/G3V/W3V 06GEEG3S/-R 06GEEG3Q/W3Q-R 10GEEG3C/W3C/-R 10GEEG3E/W3E/W3ES/-R 10GEEG3S/-R *10GEEG3Q/W3Q/-R 10GEEG3U/-R **15GEEG3E/W3E/-R ***20GEEG3E/W3E/-R UL, CSA approved to 4A 115/250V UL, CSA approved to 8A 115/250V VDE approved to 8A/250V V D E Cx (uF) L (mH) 6.5 3 10.5 Cy (pF) R ( ) 2200 1M 3300 2200 L 1M Cy R L Cy N G 2.5 3300 L' L O A D N' G' 1M 4 2.4 Cx L I N E 2200 0.1 1M 0.8 INSERTION LOSS (TYPICAL) 3300 1.05 1.5 0.4 03GEEG3E 06GEEG3E COMMON MODE COMMON MODE DIFF. MODE DIFF. MODE 80 dB 0.2 * ** *** 2200 1M 0.3 60 dB 0.2 0.3 40 dB UL, CSA approved to 13A 115/250V VDE approved to 10A/250V VDE approved to 16A/250V 20 dB 0 dB MINIMUM INSERTION LOSS IN dB 10K 20GEEG3E 100K 1M COMMON MODE 10M DIFF. MODE 80 dB COMMON MODE (L-G) IN 50 OHM SYSTEM CURRENT FREQUENCY-MHz RATING .15 .50 1.0 5.0 1A(E)(S) 28 35 38 38 1A(H) 26 36 44 54 1A(G3V) 24 35 42 50 1A(W3V) 24 35 42 50 3A(E)(S)(Q) 20 25 30 38 3A(H) 24 30 38 50 3A(G3J,W3J) 20 25 30 38 3A(G3V)(W3V) 20 29 36 48 6A(E)(S) 12 18 24 35 6A(H) 15 25 28 35 6A(Q) 15 20 24 35 6A(G3V)(W3V) 14 23 30 42 10A(E)(S) 4 10 13 28 10A(C) 10 15 15 25 10A(Q) 10 12 15 30 15A(E) 4 10 13 28 20A 8 10 15 25 10 40 55 55 55 40 55 40 46 40 45 40 45 35 30 32 35 30 60 dB 30 40 55 55 55 40 40 40 50 40 45 55 50 40 35 45 40 35 40 dB 20 dB 0 dB 2-4 10K 100K 1M 10M OR PANEL PCB ASSEMBLY FROM FRONT MECHANICAL CONSTRUCTION 2.07MAX. 52.5MAX. 0.13(2X) 3.3(2X) L 0.84MAX. 21.3MAX. 1.575 0.02 40.0 0.5 N G M3 R0.12 R3.0 +0.02 1.12-0 +0.5 28.45-0 SUGGESTED MOUNTING CUTOUT (MOUNTING FROM FRONT) 1.12Max. 28.4Max. EG3E, EG3Q (Optional soldering lug or wire type) IEC INLET FILTERS +0.02 0.85-0 +0.5 21.6-0 2.126MAX. 54.0MAX. 1.97MAX. 50.0MAX. 38.6 1.52 1.575 0.005 40.0 0.13 L 0.84MAX. 21.3MAX. 1.99MAX. 50.5MAX. 1.575 0.02 40.0 0.5 0.13(2X) 3.3(2X) N G +0.02 0.85-0 +0.5 21.6-0 1.34 34.0 1.94MAX. 49.27MAX. 1.79MAX. 45.46MAX 1.575 0.005 40.0 0.13 M3 EG3S 0.079 2.0 R0.12 R3.0 1.12MAX. 28.4MAX. 2.07 MAX. 52.5 MAX. L 0.82 MAX. 20.9 MAX. 1.575 0.02 40.0 0.5 0.13 (2X) 3.3 (2X) N G +0.02 1.12-0 +0.5 28.45-0 +0.02 0.85-0 +0.5 21.6-0 EG3U (With Compact Size) 1.95 MAX. 49.6 MAX. 1.33 0.02 33.7 0.5 1.12 MAX. 28.5 MAX. 1.81 MAX. 46.1 MAX. 1.575 0.005 40.0 0.13 M3 (2X) R0.12 (4X) R3.0 (4X) 1.99MAX. 50.5MAX. 1.575 0.02 40.0 0.5 0.83MAX. 21.1MAX. 0.13 (2X) 3.3 (2X) N L G 1.575 0.005 EG3V 0.90 0.004 22.9 0.1 1.55MAX. 39.4MAX. 40.0 0.13 R0.236 R6.0 1.18MAX. 30.0MAX. 0.14 3.5 +0.02 1.20-0 +0.5 30.5-0 BLUE BROWN GREEN/YELLOW SUGGESTED MOUNTING CUTOUT (MOUNTING FROM BEHIND) N G 21.1MAX. L 0.83MAX. 0.13 (2X) 3.3 (2X) 1.575 0.02 40.0 0.5 1.99MAX. 50.5MAX. SUGGESTED MOUNTING CUTOUT (SAME AS ABOVE) UNIT: INCH mm 1.55MAX. 39.4MAX. EW3V WIRE LENGTH : 4.0" MIN. 2-5 1.18MAX. 30.0MAX. PANEL PCB ASSEMBLY FROM FRONT 1.67 42.3 L G N 1.99MAX. 50.5MAX. 1.575 0.02 40.0 0.5 1.12MAX 28.4MAX IEC INLET FILTERS MECHANICAL CONSTRUCTION 0.13(2X) 3.3(2X) 0.24 6.0 1.81MAX. 46.0MAX. SUGGESTED MOUNTING CUTOUT (MOUNTING FROM FRONT) +0.02 0.85-0 +0.5 21.6-0 0.84MAX 21.3MAX 1.575 0.005 40.0 0.13 EW3J M3 R0.12 R3.0 +0.02 1.12-0 +0.5 28.45-0 1.99MAX. 50.5MAX. L 0.84MAX. 0.13 (2X) 3.3 (2X) N 1.575 0.005 40.0 0.13 +0.02 0.85 - 0 +0.5 21.6 - 0 1.12MAX 28.4MAX 1.41 35.7 1.45MAX. 36.8MAX. G 21.3MAX. 1.575 0.02 40.0 0.5 +0.02 1.12-0 +0.5 28.45-0 BLUE G/Y BROWN M3 R0.12 R3.0 SUGGESTED MOUNTING CUTOUT EW3ES 0.14 0.12 3.0 3.5 1.56 39.5 0.42 10.6 0.88 22.3 0.13(2X) 3.3(2X) 0.02 0.5 40.0 1.95 49.5 1.575 N G 1.23 31.25 L 0.81 20.5 0.44 11.15 1.18 30.0 0.94 24.0 HG3J 22.86 0.1 0.06 1.6 0.9 0.004 1.575 0.004 40.0 0.1 0.142 0.008 3.6 0.2 R0.236 R6.0 SUGGESTED MOUNTING CUTOUT (MOUNTING FROM BEHIND) 0.08 2.0 2.09 53.0 1.36MAX. 34.5MAX. 0.138 3.5 1.654 0.004 42.0 0.1 WIRE LENGTH : 4.0" MIN. 2-6 +0.02 1.043-0 +0.5 26.5-0 1.04MAX. 26.5MAX. 3.19MAX. 81.0MAX. 20GEEG3E (Optional wire type) 0.138 3.5 1.18 30.0 2.60MAX. 66.0MAX. 1.654 42.0 0.87 22.0 1.2 0.004 30.5 0.1 R0.157MAX. R4.0MAX. M3 +0.02 1.358-0 +0.5 34.5-0 SUGGESTED MOUNTING CUTOUT (MOUNTING FROM REVERSE) UNIT: INCH mm