NEW CHIP FUSES; RECTANGULAR TYPE KAMAYA OHM ® FCC20, 32 C US •Features 1. Excellent for use in the circuit of miniature portable equipment for over current protection. 2. Available in 0805 and 1206 size with overall height of 0.6mm. 3. Recognized to meet UL and c-UL. •File No.: E176847 4. Conform to IEC 60127-4 Universal Modular Fuse-Links (UMF). (Option Code : AA) •Dimensions W L c d d Current value is marked with 3-digits on the over coating. e.g:"631"− 63×101(mA) H c Unit : mm Inch H Metric Style L W 0805 2.0±0.1 0.6±0.1 FCC20 2012 1.25±0.1 1206 3.2±0.2 0.6±0.1 FCC32 3216 1.6±0.15 •0402 and 0603 size are available. Please contact KAMAYA for further information. c 0.4±0.2 0.5±0.25 d 0.4±0.2 0.5±0.25 *Unit weight/pc. 6mg 10mg *Values for reference Classification •Product Example FCC 20 Size Product Type Style Product Type 24 Size Size Code Metric Inch 20 2012 0805 32 3216 1206 202 AA Rated Current Option Code Rated Current e.g : 501=0.5A 132=1.25A 3Digit 202=2.0A Code AA AD Option Code Contents Conform to EC 60127-4 For general purpose TP Packaging * Packaging Code Packaging B Bulk(Loose Package) TP Paper Tape. *Refer to Taping and Packaging information in page 34.35 KAMAYA OHM CHIP FUSES, RECTANGULAR TYPE FCC20, 32 •Ratings Style FCC20 FCC32 Style FCC20 FCC32 Rated Current Code Value A 501 0.5 631 0.63 801 0.8 102 1.0 132 1.25 162 1.6 202 2.0 252 2.5 501 0.5 631 0.63 801 0.8 102 1.0 132 1.25 162 1.6 202 2.0 252 2.5 Option Code ( Rated Current Code Value A 501 0.5 631 0.63 801 0.8 102 1.0 132 1.25 162 1.6 202 2.0 252 2.5 501 0.5 631 0.63 801 0.8 102 1.0 132 1.25 162 1.6 202 2.0 252 2.5 AA Conform to IEC60127-4 ) Option Code AD (For general purpose) Internal Resistance m ohm max. 270 190 130 100 80 65 55 40 295 200 140 110 85 75 65 45 Interrupting Rating Carrying Capacity Clearing Time 32Vd.c. 50A 110% under 200% of Internal Resistance m ohm max. 270 190 130 100 80 65 55 40 295 200 140 110 85 75 65 45 Interrupting Rating Carrying Capacity Clearing Time 32Vd.c. 50A 110% under 250% of Within 120s The derated values of dissipation at temperature in excess of 70°C shall be as indicated by the following curve. •Recommended Using Condition The dissipation (steady state) : (r.m.s. value of normal current)×80% 2 Note : The Application Guide ( I t-t graph, using guide, etc) is available. Category Temperature Range °C Within 5s −55∼+125 Rated Current 100 Percentage of the rated dissipation(%) •Thermal Derating 80 60 40 Area of recommended operation 20 0 Performance Characteristics Description Carrying Capacity Bend strength of the face plating Solderability Resistance to soldering heat −55∼+125 Rated Current Note : As for the fusible characteristics except for the above, ask KAMAYA. • Category Temperature Range°C Requirements No fusing −55 0 70 125 Ambient Temperature(°C) Test Methods IEC 60127-4 Rated dissipation×110%, 70°C, 1h No visible damage Clause 8.3 1mm/s, amount of bend : 3mm At least 95% of the terminal surface must be covered by new solder Clause 8.5 Be immersed into solder at 235°C for 2s No visible damage. Meet electrical requirement Clause 8.7 Be immersed into solder at 260°C for 10s Endurance (rated load) The voltage drop shall not have increased by more than 10% of the value measured before the test Temperature rise on the surface 70°C max. Clause 9.4 At normal condition Rated current ×1.05, 1h"ON", a quarter"OFF",100cycles Rated current ×1.25, 1h Clause 9.7.5 Test will be conducted at the highest temperature rise of the element before 5min from Endurance test over. 25