ZM2BG94W Part Number: www.SunLED.com 5.6X1.4mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Features z5.6mmX1.4mm RIGHT ANGLE SMT LED, 1.0mm THICKNESS. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zMOISTURE SENSITIVITY LEVEL : LEVEL 4. zPACKAGE: 2000PCS / REEL . zRoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Operating Characteristics (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 525 nm Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 535 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 39 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 65 pF IF 30 mA Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 100 mA Power Dissipation PT 111 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Green Published Date : FEB 27,2008 V 3.7 Forward Current ZM2BG94W 3.2 VF V Emitting Color VF Forward Voltage (Max.) (IF=20mA) 5 Part Number Forward Voltage (Typ.) (IF=20mA) Unit VR Electrostatic Discharge Threshold (HBM) Unit M2BG (InGaN) Reverse Voltage Storage Temperature M2BG (InGaN) 1000 Emitting Material InGaN mW °C V Lens-color Water Clear Drawing No : SDSA6422 Luminous Intensity (IF=20mA) mcd min. typ. 480 995 V1 Wavelength nm λP Viewing Angle 2 θ 1/2 525 90° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com ZM2BG94W 5.6X1.4mm RIGHT ANGLE SMD CHIP LED LAMP M2BG Published Date : FEB 27,2008 Drawing No : SDSA6422 V1 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com ZM2BG94W 5.6X1.4mm RIGHT ANGLE SMD CHIP LED LAMP Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 27,2008 Drawing No : SDSA6422 V1 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com 5.6X1.4mm RIGHT ANGLE SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 27,2008 ZM2BG94W Drawing No : SDSA6422 ZM2BG94W V1 Checked : B.L.LIU P.4/4