Series 72 Guardian 710-858 Direct Attachment Guardian Y Transition For Series 72 Annular Convoluted Tubing Direct-attachment Guardian Y transition How To Order “B” End, Conduit Entry Size (Table I) Finish (Table II) Product Series 710 - 858 M Basic No. 09 09 “A” End, Conduit Entry Size (Table I) B = Band K = Precoiled (Omit for none) 09 B T “C” End, Conduit Entry Size (Table I) Shrink Boot (Omit if not required) See Table I .135 typ “B” End .380 typ .060 typ D Max Conduit o-ring 2x typ 45° Conduit retaining clip typ Conduit I.D. Typ A Max Typ “C” End tubing shown for reference only B Max C Max band option (k option shownsee notes) “A” End accommodates 600-052-1 band shrink sleeve or boot groove Material and Finish Transition: See Table II O-ring: Silicone/NA Retaining clip: High-grade engineering thermoplastic/NA Tools and Assembly notes Conduit retaining clip and conduit O-rings to be supplied unassembled Glenair assembly procedure AP74-010 is recommended for adapter to conduit termination Glenair 600 Series backshell assembly tools are recommended for assembly and installation ©2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 26 Series 72 Guardian 710-858 Direct Attachment Guardian Y Transition For Series 72 Annular Convoluted Tubing Table I Entry Size Conduit I.D. A Max Min B Max Max (4.1) .19 (4.8) 1.033 (26.2) C Max D Max Shrink Boot Ref 2.816 (71.5) 1.782 (45.3) 770-001S103 06 .53 (13.5) .16 09 .63 (16.0) .24 (6.1) .28 (7.1) 1.053 (26.7) 2.950 (74.9) 1.897(48.2) 770-001S103 12 .73 (18.5) .33 (8.4) .37 (9.4) 1.075 (27.3) 3.099 (78.7) 2.024 (51.4) 770-001S104 16 .86 (21.8) .45 (11.4) .50 (12.7) 1.102 (28.0) 3.282 (83.4) 2.181 (55.4) 770-001S104 20 .98 (24.9) .57 (14.5) .62 (15.7) 1.127 (28.6) 3.452 (87.7) 2.326 (59.1) 770-001S105 24 1.15 (29.2) .69 (17.5) .75 (19.1) 1.162 (29.5) 3.693(93.8) 2.531 (64.3) 770-001S106 28 1.27 (32.3) .81 (2.6) .87 (22.1) 1.187 (30.1) 3.868(98.2) 2.676(68.0) 770-001S107 32 1.40 (35.6) .93 (23.6) 1.00 (25.4) 1.214 (30.8) 4.046(102.8) 2.833 (72.0) 770-001S107 40 1.62 (41.1) 1.18 4.357(110.7) 770-001S107 (3.0) 1.25 (31.8) 1.259 (32.0) 3.098 (78.7) Table II Sym Finish Description M Electroless Nickel MT Nickel-PTFE NF Aluminum Cad/Olive Drab over Electroless Nickel ZN Zinc Nickel/Olive Drab over Electroless Nickel ZNU Zinc Nickel/Black over Electroless Nickel Z1 ©2011 Glenair, Inc. Material Stainless Steel Passivate CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 27