EMD29 Transistors General purpose transistor (isolated transistors) EMD29 DTB513Z and DTC114E A are housed independently in a EMT6 package. zApplications DC / DC converter Motor driver zExternal dimensions (Unit : mm) EMT6 zFeatures 1) DTr1 : PNP digital transistor DTr2 : NPN digital transistor 2) Mounting possible with EMT3 automatic mounting machines. 1.6 0.5 1.0 0.5 0.5 (6) (5) (4) 1.6 1.2 1pin mark (1) (2) (3) 0.22 zStructure PNP / NPN Silicon epitaxial planar digital transistor 0.13 Each lead has same dimensions Abbreviated symbol : D29 ROHM : EMT6 The following characteristics apply to both DTr1 and DTr2. zEquivalent circuit EMD29 (6) (5) R1 (4) R2 DTr2 DTr1 R2 DTr1 : R1/R2 =1kΩ/10kΩ DTr2 : R1/R2 =10kΩ/10kΩ (1) R1 (2) (3) ! zPackaging specifications Type EMD29 EMT6 Package D29 Marking T2R Code 8000 Basic ordering unit (pieces) Rev.A 1/5 EMD29 Transistors zAbsolute maximum ratings (Ta=25qC) DTr1 Parameter Supply voltage Symbol DTr1 Unit VCC −12 V VIN −10 to +5 V IC (MAX.) −500 mA Power dissipation Pd 120 mW Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C DTr2 Unit Input voltage Output current ∗ ∗ Each terminal mounted on a recommended. DTr2 Parameter Symbol Supply voltage VCC 50 V Input voltage VIN −10 to +40 V IO 50 IC (MAX.) 100 Power dissipation Pd 120 mW Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C Symbol Limits Unit Pd 150(TOTAL) Tstg −55 to +125 Output current mA ∗ ∗ Each terminal mounted on a recommended. DTr1/DTr2 Parameter Power dissipation Storage temperature mW ∗ °C ∗ Each terminal mounted on a recommended. Rev.A 2/5 EMD29 Transistors zElectrical characteristics (Ta=25qC) DTr1 Parameter Input voltage Output voltage Input current Output current DC current gain Transition frequency Input resistance Resistance ratio ∗ Symbol Vl(off) Min. − Typ. − Max. −0.3 Unit V Conditions VCC= −5V / Io= −100uA VI(on) Vo(on) II IO(off) GI fT R1 R2/R1 −2.5 − − − 140 − 0.7 8 − −60 − − − 260 1.0 10 − −300 −6.4 −0.5 − − 1.3 12 V mV mA MHz kΩ − VO= −0.3V / Io= −20mA IO= −100mA, II= −5mA VI= −5V VCC= −12V / VI=0V VO= −2V / Io= −100mA VCE= −10V / IE=5mA, f=100MHz − Symbol Vl(off) Min. − Typ. − Max. 0.5 Unit V Conditions VCC=5V / Io=100uA VI(on) Vo(on) II IO(off) GI fT R1 R2/R1 3 − − − 30 − 7 0.8 − 100 − − − 250 10 1 − 300 880 0.5 − − 13 1.2 V mV μA VO=0.3V / Io=2mA IO=10mA, II=0.5mA VI=5V VCC=50V / VI=0V VO=5V / Io=5mA VCE=10V / IE= −5mA, f=100MHz − μA − − ∗ Characteristics of built-in transistor. DTr2 Parameter Input voltage Output voltage Input current Output current DC current gain Transition frequency Input resistance Resistance ratio ∗ μA − MHz kΩ − − ∗ Characteristics of built-in transistor. Rev.A 3/5 EMD29 Transistors zElectrical characteristic curves DTr1 100 100 䎾䎃䏄䏗䎃䎐䎗䎓䛐䎃䏀 10 䎾䎃䏄䏗䎃䎕䎘䛐䎃䏀 䎾䎃䏄䏗䎃䎔䎓䎓䛐䎃䏀 100 10 䎾䎃䏄䏗䎃䎐䎗䎓䛐䎃䏀 䎾䎃䏄䏗䎃䎕䎘䛐䎃䏀 䎾䎃䏄䏗䎃䎔䎓䎓䛐䎃䏀 1 0.1 1 0 0.5 1 10 䎾䎃䏄䏗䎃䎕䎘䛐䎃䏀 1 1000 1 10 100 1000 OUTPUT CURRENT : IO [mA] 㪝㫀㪾㪊㩷㩷㪠㫅㫇㫌㫋㩷㫍㫆㫃㫋㪸㪾㪼㩷㫍㫊㪅㩷㫆㫌㫋㫇㫌㫋㩷㪺㫌㫉㫉㪼㫅㫋 㩷㩷㩷㩷㩷㩷㩿㪦㪥㩷㪺㪿㪸㫉㪸㪺㫋㪼㫉㫀㫊㫋㫀㪺㫊㪀㩷㪠㪠 1000 1.00 Vo = 5[V] IO/II = 20/1 䎾䎃䏄䏗䎃䎔䎓䎓䛐䎃䏀 䎾䎃䏄䏗䎃䎕䎘䛐䎃䏀 䎾䎃䏄䏗䎃䎐䎗䎓䛐䎃䏀 DC CURRENT GAIN : GI IO/II = 50/1 OUTPUT VOLTAGE : VO(on) [ V ] OUTPUT VOLTAGE : VO(on) [ V ] 100 㪝㫀㪾㪅㪉㩷㩷㪠㫅㫇㫌㫋㩷㫍㫆㫃㫋㪸㪾㪼㩷㫍㫊㪅㩷㫆㫌㫋㫇㫌㫋㩷㪺㫌㫉㫉㪼㫅㫋 㩷㩷㩷㩷㩷㩷㩷㩷㩿㪦㪥㩷㪺㪿㪸㫉㪸㪺㫋㪼㫉㫀㫊㫋㫀㪺㫊㪀㩷㪠 1.00 䎾䎃䏄䏗䎃䎔䎓䎓䛐䎃䏀 䎾䎃䏄䏗䎃䎕䎘䛐䎃䏀 0.10 䎾䎃䏄䏗䎃䎐䎗䎓䛐䎃䏀 100 1000 100 䎾䎃䏄䏗䎃䎔䎓䎓䛐䎃䏀 䎾䎃䏄䏗䎃䎕䎘䛐䎃䏀 䎾䎃䏄䏗䎃䎐䎗䎓䛐䎃䏀 10 1 0.01 0.01 10 䎾䎃䏄䏗䎃䎐䎗䎓䛐䎃䏀 䎾䎃䏄䏗䎃䎔䎓䎓䛐䎃䏀 OUTPUT CURRENT : IO [mA] 㪝㫀㪾㪅㪈㩷㩷㪦㫌㫋㫇㫌㫋㩷㪺㫌㫉㫉㪼㫅㫋㩷㫍㫊㪅㩷㫀㫅㫇㫌㫋㩷㫍㫆㫃㫋㪸㪾㪼 㩷㩷㩷㩷㩷㩷㩷㩷㩿㪦㪝㪝㩷㪺㪿㪸㫉㪸㪺㫋㪼㫉㫀㫊㫋㫀㪺㫊㪀 1 10 0.1 1 1.5 INPUT VOLTAGE : VI(off) [ V ] 0.10 VO = 0.3V VO =0.2V INPUT VOLTAGE : VI(on) [ V ] VCC = 5[V] INPUT VOLTAGE : VI(on) [ V ] OUTPUT CURRENT : IO [㱘A] 1000 1 10 100 1000 OUTPUT CURRENT : IO [mA] OUTPUT CURRENT : Io [mA] 㪝㫀㪾㪅㪋㩷㩷㪦㫌㫋㫇㫌㫋㩷㫍㫆㫃㫋㪸㪾㪼㩷㫍㫊㪅㩷㫆㫌㫋㫇㫌㫋㩷㪺㫌㫉㫉㪼㫅㫋㩷㩷㪠 㪝㫀㪾㪅㪌㩷㪦㫌㫋㫇㫌㫋㩷㫍㫆㫃㫋㪸㪾㪼㩷㫍㫊㪅㩷㫆㫌㫋㫇㫌㫋㩷㪺㫌㫉㫉㪼㫅㫋㩷㪠㪠 1 10 100 1000 OUTPUT CURRENT : IO [mA] 㪝㫀㪾㪅㪍㩷㩷㪛㪚㩷㪺㫌㫉㫉㪼㫅㫋㩷㪾㪸㫀㫅㩷㫍㫊㪅㩷㫆㫌㫋㫇㫌㫋㩷㪺㫌㫉㫉㪼㫅 Rev.A 4/5 EMD29 Transistors DTr2 500μ Ta=100˚C 25˚C −40˚C 200μ 100μ 50μ 20μ 10μ 5μ 2μ 1μ 0 1 VO=0.3V 50 20 10 5 2 Ta=−40˚C 25˚C 100˚C 1 500m 200m 0.5 1 1.5 2 2.5 3 INPUT VOLTAGE : VI (off) (V) Fig.7 Output current vs. input voltage (OFF characteristics) 1k 100m 100μ 200μ lO/lI=20 500m OUTPUT VOLTAGE : VO (on) (V) 2m 1m 100 VCC=5V INPUT VOLTAGE : VI (on) (V) OUTPUT CURRENT : Io (A) 10m 5m Ta=100˚C 25˚C −40˚C 200m 100m 50m 20m 10m 5m 2m 500μ 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A) Fig.8 Input voltage vs. output current (ON characteristics) 1m 100μ 200μ 500μ 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A) Fig.9 Output voltage vs. output current VO=5V DC CURRENT GAIN : GI 500 200 Ta=100˚C 25˚C −40˚C 100 50 20 10 5 2 1 100μ 200μ 500μ1m 2m 5m 10m 20m 50m100m OUTPUT CURRENT : IO (A) Fig.10 DC current gain vs. output current Rev.A 5/5 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1