Data Sheet Mechanical Drawing 11.1 MAX 10.2 MAX ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 IN07119 YYWW 8.0 MAX General Information Item Inductance @0Adc 7.5 MAX Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) IN07119 0 0.1 MAX Inductor for coplanarity AUG-07-2009 (a) -2.5 +/- 0.3 --Specification Pins Spec Test Condition S-F Inductance @Isat at 25degC S - F 200 nH +/- 15% 145 nH min DCR S-F Isat at 25degC S-F 48 Adc max Isat +125degC S-F 41 Adc max Idc S-F 39 Adc max 1.6 +/- 0.15 (b) unit:mm Sample Test Data 500 kHz, 1Vrms, series 500 kHz, 1Vrms, series (48 Adc) 0.47 mOhm +/- 10% +25 deg C Recommended PCB Layout Schematic Remark 1. S 3.5 11.2 F Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 0 Description Initial release Isat is the current at which the inductance drops by 15% typ. 2. Idc is the current at which the temperature of the part increases by 50 deg C. 2.5 3. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. unit:mm 4. This is RoHS compliant product. 5. Inductance vs. Current Curve and Temperature vs. Current Curve as attached. PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/8/7 2009/8/7 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN07101 Inductance vs. Current 100.0 % Inductance 90.0 +25 degC 80.0 +125 degC 70.0 60.0 50.0 40.0 0 5 10 15 20 25 30 35 40 45 50 55 Current (A) Temperature(degC) Temperature VS Current 100 80 60 40 20 0 0 10 20 30 40 50 Current (DC) PAGE 2 OF 2