Data Sheet Mechanical Drawing 10.5 max ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 IN06073-2 YYWW 2.6 10.0 max General Information Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) Item Inductance @0Adc IN06073-2 0 Inductor AUG-07-2009 ---Specification Pins Spec S-F Inductance @Isat at 25degC S - F DCR S-F Isat at 25degC S-F Idc S-F 120 nH +/- 15% 7.5 max (a) (b) 2.0(X2) unit:mm Sample Test Data Test Condition 1 MHz, 0.1Vrms, series 87 nH min 1 MHz, 0.1Vrms, series (72 Adc) 0.22 mOhm typical +25 deg C (0.3 mOhm max) 72 Adc max 50 Adc max Remark Recommended PCB Layout Schematic 1. 2.8 S 2. 3. 3.0 10.8 F unit:mm Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 0 Description Initial release 4. 5. Isat is the current at which the inductance drops by 15%. Idc is the current at which the temperature of the part increases by 40 deg C. Inductance vs. Current Curve and Temperature vs. Current Curve as attached. This is RoHS compliant product. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/8/7 2009/8/7 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN06073-2 Inductance VS Current 80.0 60.0 40.0 20.0 0.0 0 10 20 30 40 50 60 70 80 90 100 Current (DC) Temperature VS Current Temperature(degC) Inductance(%) 100.0 120 100 80 60 40 20 0 0 10 20 30 40 50 60 70 Current (DC) PAGE 2 OF 2