Data Sheet Mechanical Drawing 10.6 max ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 IN06073-3 YYWW 2.6 10.0 max General Information Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) Item Inductance @0Adc IN06073-3 0 Inductor AUG-07-2009 ---Specification Pins Spec S-F Inductance @Isat at 25degC S - F 210 nH +/- 15% 150 nH min DCR S-F Isat at 25degC S-F 50 Adc max Isat at -40degC S-F 53 Adc max Isat at 125degC S-F 42 Adc max Idc S-F 50 Adc max 7.5 max 0.1 MAX for coplanarity (a) 2.0(X2) (b) unit:mm Sample Test Data Test Condition 1 MHz, 0.1Vrms, series 1 MHz, 0.1Vrms, series (50 Adc) 0.22 mOhm +/- 10% +25 deg C Remark Recommended PCB Layout Schematic 1. 2.8 S 2. 3. 3.0 10.8 F 4. 5. 6. unit:mm 7. 8. Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 0 Description Initial release Isat is the current at which the inductance drops by 15%. Idc is the current at which the temperature of the part increases by 40 deg C. Inductance vs. Current Curve and Temperature vs. Current Curve as attached. This is RoHS compliant product. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. Operating temperature range: -40degC to +130degC. MSL: Level 1 The part is subject to water cleaning. PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/8/7 2009/8/7 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN06073-3 Inductance vs. Current 100.0 90.0 80.0 -40 degC 70.0 +125 degC 60.0 50.0 40.0 0 5 10 15 20 25 30 35 40 45 50 Current (A) Temperature VS Current Temperature(degC) % Inductance +25 degC 120 100 80 60 40 20 0 0 10 20 30 40 50 60 70 Current (DC) PAGE 2 OF 2