Designed and Manufactured in Germany Specification Oscillator type: Rev.: 8 Date: 2014-07-08 AXIOM40 High Stability Eurocase OCXO with HCMOS Output Parameter min. Frequency range Standard frequencies Frequency stability Initial tolerance @+25°C vs. operating temperature range (steady state) 5 80 10.000 / 16.384 / 20.000 MHz MHz ±500 operating temperature range vs. supply voltage variation vs. load change Long term stability (aging) per year, after 30 days operation Frequency adjustment range Electronic Frequency Control (EFC) -10 ±100 ±50 ±25 ±10 ±5 +60 ±2 ±2 ±200 ±100 ppb ppb ppb ppb ppb ppb °C ppb ppb ppb ppb @ VC = 2.5V Option II = “100” Option II = “50” Option II = “25” Option II = “10” Option II = “05” (Note 2) VS ±5% Load ±5% Option II = “100” All other Options II 5 MHz to 12.8 MHz > 12.8 MHz 4.75 ppm ppm V EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Warm-up time @25°C Phase noise @ 10.000 MHz ±0.8 ±1 0.25 ±1 100 Enclosure (see drawing) LxWxH (Note 4) Weight Packing Handling and Testing Processing GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Unit Condition kΩ HCMOS 15 10 60 5 40 4.75 11.4 -120 -140 -145 -150 4.0 5.0 5.0 12.0 Current consumption (steady state) @ +25°C Current consumption (warm-up) Operable temperature range Storage temperature range max. Positive Reference voltage VREF output (Note 3) Supply voltage VS typ. -30 -40 5.25 12.6 200 100 500 250 +75 +85 pF ns % min dBc/Hz dBc/Hz dBc/Hz dBc/Hz V V V V mA mA mA mA °C °C 36.1x27.2x16 max. mm 30 g Palette In accordance with AXAN-011 In accordance with AXAN-012 AXIOM40 Rev.8 Drawing D2 Page 1(3) @ VS/2 ∆ffinal/f0 < ±0.1 ppm @ 10 Hz @ 100 Hz @ 1 kHz @ 10 kHz Option I =“50“ Option I =“12“ Option I =“50“ Option I =“12“ Option I =“50“ Option I =“12“ IEC 60679-3 CO 08 www.axtal.com www.axtal.com www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Notes: 1. 2. 3. 4. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Other operating temperature ranges on request Other reference voltages on request Lower height H available on request Ordering Code Model (Specification) AXIOM40 Option I 50 Option II 100 Revision Rev.8 Frequency [MHz] 10.000 Enclosure drawing Pin connections Pin # 1 2 3 4 5 Symbol VC VREF VS RF OUT GND Function Control Voltage (EFC) Reference Voltage Supply Voltage RF Output Ground Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part ... 2-17 IEC 60679-1 clause ... 4.6.2 2-20 2-58 4.6.3 2-27 4.6.8 Test conditions Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s Vibration, sinusoidal* 2-6 4.6.7 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Other environmental conditions on request GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIOM40 Rev.8 Drawing D2 Page 2(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Revision History Rev. Drawing Date [dd.mm.yyyy] 8 8 D1 D2 01.10.2012 08.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Editorial changes Editorial changes AXIOM40 Rev.8 Drawing D2 Page 3(3) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]