Designed and Manufactured in Germany Specification Oscillator type: Rev.: 1 Date: 2014-07-08 AXIOM25 OCXO in DIL14 Package with Sine Wave Output Parameter min. Frequency range Standard frequencies Frequency stability Initial tolerance @+25°C vs. operating temperature range (steady state) 10 80 10.000 / 12.800 / 16.384 operating temperature range vs. supply voltage variation vs. load change st Long term (aging) 1 year (Note 3) Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC -10 EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load RL Output level Harmonics Warm-up time Supply voltage VS typ. max. Condition ±100 ±200 ±300 ±500 +60 ±10 ±20 ±0.5 MHz MHz ppm ppb ppb ppb ppb ppb °C ppb ppb ppm VC @ centre value Option II =”100” Option II =”200” Option II =”300” Option II =”500” (Note 2) VS ±5% RL ±10% @ +40°C, after 30 days ±5 3.15 4.75 ppm V V Option I = “33” Option I = “50” ±500 ±2 0.15 0.25 1.65 2.5 Positive 100 kΩ Sine wave 50 +3 3.13 4.75 -30 2 3.47 5.25 300 200 800 500 +75 +85 3.3 5.0 Current consumption (steady state) @ +25°C Current consumption (warm-up) -30 -40 Operable temperature range Storage temperature range 20.7x13.1x8.5 max. Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1. 2. 3. Unit 5 Ω dBm dBc min V V mA mA mA mA °C °C mm g ±10% ∆ffinal/f0 < ±0.1 ppm Option I = “33” Option I = “50” Option I = “33” Option I = “50” Option I = “33” Option I = “50” IEC 60679-3 CO 02 Palette or Tube Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Operating temperature range –20°C to +70°C on request st Aging of ± 0.2 ppm / 1 year on request Ordering Code: Model (Specification) AXIOM25 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Option I 50 Option II 100 Revision Rev.1 AXIOM25 Rev.1 Drawing D1 Page 1(2) Frequency [MHz] 10.000 www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing Pin connections Pin # 1 7 8 14 Symbol VC GND RF OUT VS Function Control Voltage (EFC) Ground RF Output Supply Voltage Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B Vibration, 2-6 5.6.7.1 201A sinusoidal* 204D Vibration, 2-64 5.6.7.3 214A random* Endurance tests 108A - ageing 5.7.1 - extended aging 5.7.2 Other environmental conditions on request MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 3.6.52 3.6.48 516.4 3.6.40 516.4-4 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 514.5 4.8.35 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] 1 1 D0 D1 05.07.2005 08.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks First issue Editorial changes AXIOM25 Rev.1 Drawing D1 Page 2(2) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]