www.niccomp.com | technical support: [email protected] Higher Reflow Soldering Heat Resistant SMT V-Chip Aluminum Electrolytic Capacitors 4mm, 5mm, 6.3mm, 8mm & 10mm Diameter … NACZ___________M1F Diameter Preheat: 150℃～180℃ MAX SOLDERING TEMPERATURE* MAX EXPOSURE TIME AT MAX SOLDERING TEMPERATURE MAX EXPOSURE TIME ABOVE +200degC MAX EXPOSURE TIME ABOVE +230degC Multiple Reflow Exposure NACZxxxMxxV4X6.3TR13M1F 4 mm 120 seconds Max. +255℃ 5 seconds 60 seconds Max. 30 seconds Max. 2 Times Max. NACZxxxMxxV5x6.3TR13M1F 5 mm 120 seconds Max. +255℃ 5 seconds 60 seconds Max. 30 seconds Max. 2 Times Max. NACZxxxMxxV6.3XxxxTR13M1F 6.3 mm 120 seconds Max. +255℃ 5 seconds 60 seconds Max. 30 seconds Max. 2 Times Max. NACZxxxMxxV8X10.5TR13M1F 8 mm 120 seconds Max. +250℃ 5 seconds 60 seconds Max. 20 seconds Max. 2 Times Max. NACZxxxMxxV10XxxxTR13M1F 10 mm 120 seconds Max. +250℃ 5 seconds 60 seconds Max. 20 seconds Max. 2 Times Max. Part Number * - Top Surface of Component 1. 2. 3. All characteristics & specifications are same as conventional (legacy) NACZ Only M (±20%) capacitance tolerance is available Larger case sizes are not available in higher reflow soldering heat resistant version “M1F” ISO 9001:2000 REGISTERED