MAAOA/215-Series Toggle Switches The MAAOA/215-Series toggle switches are single pole, AC rated at 20 amps and 125 VAC. These switches are snap-in mounted, with a phenolic toggle and base, and are suitable for high ambient temperature applications including Coffee Makers and Food Warmers. Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: [email protected] • www.carlingtech.com 2 | MAAOA/215-Series Toggle Switches Mechanical Life Dielectric Strength UL/CSA: 1000V - live to dead metal parts & opposite polarity Operating Temperature Electrical Life 32°F to 185°F (0°C to 85°C) 25,000 cycles MAAOA 1 Base Part Number Wire Leads 215A - BL / ON-OFF 2 Color 1 BASE PART NUMBER: SERIES/CIRCUITRY/RATING/TERMINATION 10A 250 VAC, 20A 125 VAC, 1/2 HP 125-250 VAC 2.50 Tabs Screw Terms. Single Pole On-Off MAAOA 215 (On)-Off MM-021 - 100,000 cycles 3 Legend 2 BASE & ACTUATOR COLOR BL Black BN Brown 3 LEGEND1 On-Off Notes: Panel Cut-Out recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. 1 Imprinting is available. ON-OFF legend is not standard and must be specified after color. If not specified, switch will be manufactured with no legend. ( ) Indicates momentary function. .075[1.90] DIA #6-32NC-2 THREAD 6.000[152.4] .365[9.27] .500[12.70] .250[6.35] .420[10.67] .270[6.86] SCREW (ASSEMBLED) .250 TAB (Q.C.) INTEGRATED WIRE LEAD (no exposed conductors) TERMINAL TYPE 1.218[30.94] .156[3.96] .906[23.01] .656[16.66] TEST CUT HOLE IN ACTUAL MATERIAL .379[9.63] MOUNTING HOLE Panel Thickness: .030[.762] min - .090 [2.28] max. Specific cutout dimension range dependent on panel thickness and material. *Manufacturer reserves the right to change product specification without prior notice. REV_SW_MAAOA/215_0912 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com