R135-Series Rotary Switches The R135 and R135A-Series rotary switches are single pole, single throw “L” rated up to 3A, feature an ON-OFF repeating action, and are available with a nylon actuating knob; nylon snap-in bracket or nickel-plated brass bushing. These switches are typically used to control lighting functions. Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: [email protected] • www.carlingtech.com 2 | R135-Series Pushbutton Switches Dielectric Strength Mechanical Life UL/CSA: 1000V - live to dead metal parts 100,000 cycles Electrical Life Operating Temperature 32°F to 185°F (0°C to 85°C) 100,000 cycles R135-A 1 Base Part Number 1 BASE PART NUMBER: SERIES/CIRCUITRY/RATING/TERMINATION Wire Leads 1.5A 250 VAC; 3A 125 VAC L; 5A 12 VDC OFF-ON repeating .375 threaded bushing R135 OFF-ON repeating nylon snap-in bezel R135-A BL 2 Knob Color 2 KNOB COLOR1 BL Black WH White Notes: Standard Wire Leads are 6” long, stripped 1/2” black. If different length required, please specify at the end of the part number. ex. R135-A-BL/20”. Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. Burr on bottom. Test cut hole in actual material. 1 Custom colors available. Consult factory. .500[12.70] DIA .700[17.78] DIA OFF ON .718[18.23] .500[12.70] ON NYLON BEZEL MOUNTING HOLE Snaps into .500[12.70] Dia. hole Panel Thickness: .020[.508] to .078[1.98] .600[15.24] .375[9.52] DIA ROTATION .265[6.73] 6.000[152.40] OFF THREADED BUSHING MOUNTING HOLE Fits into .375[9.52] Dia. hole Bushing Length: .312[7.92] *Manufacturer reserves the right to change product specification without prior notice. REV_SW_R135_0912 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com