Datasheet - Petermann

PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13
D-86899 Landsberg am Lech
Fon: +49/8191/305395
Fax: +49/8191/305397
www.petermann-technik.com
info@petermann-technik.com
ISO 9001:2008
OCXO-14
FEATURES
Pb-free
RoHS-2 2011/65/EU
compliant






High reliability for low cost
Aging of ± 0.001ppm/day in compact package using SC-CUT crystals
Extended temperature range to -40/+75°C available
Short warm-up time and excellent retrace behaviour
Low power consumption and excellent phase noise parameters
AT-cut and SC-cut based designs
GENERAL DATA
SERIES
OCXO-14
PACKAGE
DIL 14/4
FREQUENCY RANGE
2.0 ~ 100.0 MHz
FREQUENCY ACCURACY
±0.5 ppm (control voltage centered)
VS. AGING
±0.5 ppm max. after first year / ±3 ppm max. after 10 years
VS. LOAD
±0.02 ppm / load change of ±10 %
FREQUENCY
STABILITY
VS. SUPPLY VOLTAGE
±0.02 ppm / supply voltage change of ±5 %
VS. TEMPERATURE
See table 1
SHORT TERM STABILITY
1.0x10E-10/s (10 MHz)
OPERATING TEMPERATURE RANGE
0/+50°C ~ -40/+75°C
STORAGE TEMPERATURE RANGE
-40/+100°C
SUPPLY VOLTAGE
+3.3VDC / +5.0VDC / +12VDC
2.0W max. during warm-up / 1.0W max. when static
CURRENT CONSUMPTION
±0.5 ppm <3 minutes
WARM-UP TIME
FREQUENCY CONTROL RANGE
±0.5 ppm
CONTROL VOLTAGE
0 ~ 3.3 VDC, 0 ~ 5 VDC
SLOPE
POSITIVE
LINEARITY
±10%
-90 dBc/Hz
10 Hz
100 Hz
-120 dBc/Hz
PHASE NOISE
(10MHz)
1 kHz
-145 dBc/Hz
10 kHz
-150 dBc/Hz
OUTPUT SIGNAL AND LOAD CHARACTERISTICS See table 2
OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION
TABLE 1- FREQUENCY STABILITY VS. TEMPERATURE
CODE
A
B
C
FREQUENCY STABILITY VS. TEMPERATURE
±0.1 ppm for AT-CUT
±0.3 ppm for SC-CUT
±0.5 ppm for AT-CUT
TEMPERATURE RANGE
0/+50°C
-20/+70°C
-40/+75°C
CRYSTALS
CERAMIC FILTERS
OSCILLATORS
SAW COMPONENTS
CERAMIC RESONATORS
Premium Quality by
PETERMANN-TECHNIK
Spec.01 • REV.00 • August 2013
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13
D-86899 Landsberg am Lech
Fon: +49/8191/305395
Fax: +49/8191/305397
www.petermann-technik.com
info@petermann-technik.com
ISO 9001:2008
TABLE 2 - OUTPUT WAVEFORM AND LOAD CHARACTERISTICS
OUTPUT
WAVEFORM
OUTPUT TYPE
CODE
FREQUENCY
RANGE
OSCILLATION
STATE
SINE WAVE
S
2.000 ~ 30.000 MHz F: FUNDAMENTAL
10.000 ~ 100.000 MHz
O: OVERTONE
HCMOS
H
2.000 ~ 30.000 MHz F: FUNDAMENTAL
10.000 ~ 100.000 MHz
O: OVERTONE
LVCMOS
L
2.000 ~ 30.000 MHz F: FUNDAMENTAL
10.000 ~ 100.000 MHz
O: OVERTONE
OUTPUT
CHARACTERISTICS
Load: 50 Ω
Output level: >2dBm
Harmonic : < -25dBm
Noise Suppression: <- 75dBm
Load: 15PF TYP/50 PF Max. available
“1“ level: > 0.9VDD; “0“ level: <0.1VDD
Duty cycle: 45/55
Rise/fall time: <6ns(fn<40MHz)
<3ns(fn>40 MHz)
Load: 15PF TYP/50 PF Max. available
“1“ level: > 0.9VDD; “0“ level: <0.1VDD
Duty cycle: 45/55
Rise/fall time: <6ns(fn<40MHz)
<3ns(fn>40 MHz)
OUTLINE DRAWING OF OCXO-14
TEST CURCUIT
CRYSTALS
CERAMIC FILTERS
OSCILLATORS
SAW COMPONENTS
CERAMIC RESONATORS
Premium Quality by
PETERMANN-TECHNIK
Spec.01 • REV.00 • August 2013
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13
D-86899 Landsberg am Lech
Fon: +49/8191/305395
Fax: +49/8191/305397
www.petermann-technik.com
info@petermann-technik.com
ISO 9001:2008
ORDERING INFORMATION
OC14-5-A-10.000MHz-S
TYPE
OUTPUT WAVEFORM
S-SINE WAVE / H-HCMOS /
L-LVCMOS
OC14 / OC20 / OC25 / OC36 / OC50
VDD
3 for 3.3 Volt / 5 for 5 Volt / 12 for 12
FREQUENCY STABILITY
FREQUENCY
See Table 1
See Table 2
PLEASE INDICATE YOUR REQUIRED PARAMETERS
CRYSTALS
CERAMIC FILTERS
OSCILLATORS
SAW COMPONENTS
CERAMIC RESONATORS
Premium Quality by
PETERMANN-TECHNIK
Spec.01 • REV.00 • August 2013