PACKAGE INFORMATION • PE-DFN(PLP)1212-6-101108 DFN(PLP)1212-6 Unit: mm 1.20 A 4 6 0.05 C0.05 0.25±0.05 1.20 ×4 B 0.425±0.05 PACKAGE DIMENSIONS INDEX 1 3 0.4Max. 0.4 S 0.18±0.05 0.05 M AB Bottom View 0.05 S 2.0±0.05 4.0±0.1 1.3 3.5±0.05 1.5 +0.1 0 8.0±0.3 0.2±0.1 1.75±0.1 TAPING SPECIFICATION 0.5±0.1 1.2Max. 1.3 4.0±0.1 TR TAPING REEL DIMENSIONS (1reel=5,000pcs) User Direction of Feed REUSE REEL (EIAJ-RRM-08Bc) 11.4±1.0 21±0.8 0 ∅ 180 −1.5 ∅ 60 +1 0 2±0.5 ∅13±0.2 9.0±0.3 PACKAGE INFORMATION PE-DFN(PLP)1212-6-101108 POWER DISSIPATION (DFN(PLP)1212-6) This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: Measurement Conditions Standard Land Pattern Environment Mounting on Board (Wind velocity=0m/s) Board Material Glass cloth epoxy plastic (Double sided) Board Dimensions 40mm × 40mm × 1.6mm Copper Ratio Top side : Approx. 50% , Back side : Approx. 50% Through-holes φ0.54mm × 28pcs Measurement Results (Topt=25°C, Tjmax=125°C) Standard Land Pattern Power Dissipation 400mW Thermal Resistance θja=(125−25°C)/0.4W=250°C/W Thermal Resistance θjc=67°C/W 40 500 400 300 40 Power Dissipation PD (mW) 600 200 100 50 75 85 100 125 150 Ambient Temperature (°C) Measurement MeasurementBoard BoardPattern Pattern Power Dissipation IC Mount Area (Unit: mm) The above graph shows the Power Dissipation of the package based on Tjmax=125°C and Tjmax=150°C. Operating the IC in the shaded area in the graph might have an influence it's lifetime. Operating time must be within the time limit described in the table below, in case of operating in the shaded area. Product Name RP105K RP201K RP106K RP107K RP200K Operating time Estimated years∗ 13,000hrs 9 years ∗The volume is calculated on the supposition that operating four hours/day. RECOMMENDED LAND PATTERN 0.18 1.50 25 0.25 0 0.625 0 0.40 (Unit: mm)