BTE6000 / PTU6000 Series Precision stainless steel pressure transmitters FEATURES · 0...-1 to 0...16 bar, 0...-15 to 0...250 psi gage1 or absolute11 · For corrosive media · Flush mount versions · 0...10 V, 1...6 V, 0...20 mA, 4...20 mA output · Field interchangeable · For harsh environments MEDIA COMPATIBILITY Wetted materials: Stainless steel 1.4404 (316L), NBR12 Housing: Stainless steel 1.4404 (316L), protection class IP 65 (according to DIN EN 60529, NEMA 4X)1 ELECTRICAL CONNECTION 0...10 V, 1...6 V output +Vs SPECIFICATIONS9,10 sensor Maximum ratings 3 -Vs 2 Supply voltage (reverse polarity protection) BTE(M)/PTU6...0, ...1 13...30 V BTE(M)/PTU6...4, ...52 12...36 V Maximum load current BTE(M)/PTU6...0, ...1 10 mA -55...100°C -40...100°C 0...70°C Humidity limits 0...95 %RH Mechanical shock Proof pressure3 10 gRMS sensor GND 12 to 36 V RL V GND 4...20 mA output 50 g 2 x rated pressure +Vs 1 Iout 3 -Vs 2 sensor +Vs 1 N/C 3 -Vs 2 E / 11102 / B V 0...20 mA output Temperature limits Storage Operating Compensated Vibration (5 to 500 Hz) 13 to 30 V 1 Vout 12 to 36 V V RL GND 1/6 www.first-sensor.com www.sensortechnics.com BTE6000 / PTU6000 Series Precision stainless steel pressure transmitters COMMON PERFORMANCE CHARACTERISTICS1 Characteristics Min. Thermal effects (0 to 70°C)4 200/300 mbar, 3/5 psi only Thermal effects (-40 to 0°C, 70 to 100°C) Non-linearity (BSL) and hysteresis5 Repeatability Long term stability6 Output noise (0 < f < 1 kHz) Response time (10 to 90 %) Power supply rejection Offset Span Offset Span Offset Span Typ. Max. ±0.01 ±0.01 ±0.03 ±0.03 ±0.06 ±0.04 ±0.03 ±0.03 ±0.1 ±0.1 ±0.2 ±0.04 1 ±0.05 ±0.05 Offset Span Unit %FSO/°C ±0.5 %FSO ms %FSO/V INDIVIDUAL PERFORMANCE CHARACTERISTICS1 0...10 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Full scale span7 BTE/PTU6N... all others BTE/PTU6N... all others Min. Typ. Max. 4.85 -0.15 4.9 9.9 5.0 0 5.0 10.0 5.15 0.15 5.1 10.1 50 Output impedance Power consumption (no load) 100 Unit V Ω mW 1...6 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Min. Typ. Max. 3.35 0.85 2.4 4.9 Output impedance 3.5 1.0 2.5 5.0 6.0 3.65 1.15 2.6 5.1 50 Power consumption (no load) 100 Zero pressure offset Full scale span7 BTE/PTU6N... all others BTE/PTU6N... all others Unit V Ω mW 4...20 mA output (VS = 15 V, RL = 100 Ω, tamb = 25°C) Characteristics Min. Typ. Max. Unit 11.85 3.85 7.9 15.9 12.15 4.15 8.1 16.1 mA Output impedance 12.0 4.0 8.0 16.0 0.1 Power consumption (IL = 20 mA) 260 Zero pressure offset Full scale span7 E / 11102 / B BTE/PTU6N... all others BTE/PTU6N... all others Ω mW 2/6 www.first-sensor.com www.sensortechnics.com BTE6000 / PTU6000 Series Precision stainless steel pressure transmitters INDIVIDUAL PERFORMANCE CHARACTERISTICS1 (cont.) 0...20 mA output (VS = 15 V, RL = 100 Ω, tamb = 25°C) Characteristics Min. Typ. Max. Unit 9.85 -0.15 9.9 19.9 10.15 0.15 10.1 20.1 mA Output impedance 10.0 0 10.0 20.0 0.1 Power consumption (IL = 20 mA) 260 Zero pressure offset BTE/PTU6N... all others BTE/PTU6N... all others Full scale span7 Ω mW ELECTROMAGNETIC CAPABILITY8 Radiated, radio frequency electromagnetic field immunity (RFI) Electrical fast transient / burst immunity (EFT) Electrostatic discharge immunity test (ESD) Immunity to conducted disturbances induced by radio-frequency fields Test conditions 10 V/m, 80 to 1000 MHz 80 % AMC (1 kHz) EN61000-4-4: ±2 kV Criterion Interference EN61000-4-3: EN61000-4-2: EN61000-4-6: ±4 kV, contact discharge ±8 kV, air discharge 0.15 to 80 MHz 10 V, 80 % AMC (1 kHz) A <1 %FSO B <1 %FSO B <1 %FSO A <1 %FSO LOAD LIMITATION RECOMMENDED ACCESSORY 0...20 mA output version 4...20 mA output version Plug DIN EN 175301-803 A and profile washer included in delivery. For a complete connector/cable assembly use order no. ZK000110-x (x=cable lenghts in m). 1400 Ohm 1200 50 1000 34 800 600 operating range Profile washer 400 M3 31 200 0 5 10 15 20 25 30 35 V supply voltage E / 11102 / B dimensions in mm Note: For proper function of all gage devices the gage port must be vented to the atmosphere through the connector/cable assembly. 3/6 www.first-sensor.com www.sensortechnics.com BTE6000 / PTU6000 Series Precision stainless steel pressure transmitters OUTPUT CHARACTERISTICS 1...6 V output version 0...10 V output version 10 Vout V 9 10 Vout 9 V 8 8 BTE/PTU6N... 7 7 6 6 5 5 4 all others BTE/PTU6P... 4 3 3 2 2 1 1 -100 -80 -60 -40 -20 0 +20 +40 +60 +80 +100 % operating pressure 4...20 mA output version BTE/PTU6P... all others -100 -80 -60 -40 -20 0 +20 +40 +60 +80 +100 % operating pressure 0...20 mA output version 20 20 Iout 18 mA 16 BTE/PTU6N... Iout 18 mA 16 14 14 12 12 10 BTE/PTU6N... BTE/PTU6P... 8 all others 4 2 2 E / 11102 / B 0 +20 +40 +60 +80 +100 % operating pressure all others 6 4 -100 -80 -60 -40 -20 BTE/PTU6N... 10 8 6 BTE/PTU6P... -100 -80 -60 -40 -20 0 +20 +40 +60 +80 +100 % operating pressure 4/6 www.first-sensor.com www.sensortechnics.com BTE6000 / PTU6000 Series Precision stainless steel pressure transmitters OUTLINE DRAWING BTE6... 25.0 (0.98) 17.0 (0.67) NOM 83.0 (NOM 3.27) 12.0 (0.47) 1 vent hole 8.5 (0.33) 27.0 (1.06) diam. 6.0 (0.24) G1/2" (BSP) HEX27 ( 1 1/8) 3 2 mass: 230 g 1 dimensions in mm (inches) BTE6...-FL NOM 86.5 (NOM 3.41) NOM 13.0 (NOM 0.51) 12.0 (0.47) vent hole 27.0 (1.06) diam. 23.0 (0.91) diam. mass: 250 g 2 PTU6... 17.0 (0.67) 1 dimensions in mm (inches) WARNING Do not touch diaphragm NOM 83.0 (NOM 3.27) 8.5 (0.33) 12.0 (0.47) 1 vent hole 3 27.0 (1.06) diam. 1/4"-18 NPT HEX27 ( 1 1/8) 1 3 G3/4" (BSP) HEX32 ( 15/16) NOM 3.0 (NOM 0.12) 12.0 (0.47) 2 mass: typ. 280 g 1 dimensions in mm (inches) PTU6...-FL 12.7 (0.5) 2.7 (0.1) NOM 86.5 (NOM 3.41) 12.0 (0.47) 12.0 (0.47) mass: typ. 190 g E / 11102 / B 27.0 (1.06) diam. Ø22,5 ± 0,05 3 1-12UNF HEX32 ( 15/16) 1 vent hole WARNING Do not touch diaphragm 2 1 dimensions in mm (inches) 5/6 www.first-sensor.com www.sensortechnics.com BTE6000 / PTU6000 Series Precision stainless steel pressure transmitters Specification notes: 1. IP 65 protection is given when the connector is locked with a rubber washer. For proper function the gage port is vented to the atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure. 2. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagram. 3. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. 4. Thermal effects tested and guaranteed from 0 to 70°C relative to 25°C. All specifications shown are relative to 25°C. 5. Non-linearity refers to the Best Straight Line fit measured for offset, full scale span and 1/2 full scale span. 6. Long term stability is the change in output after one year or 1 million pressure cycles. 7. Span is the arithmetic difference in transmitter output signal measured at zero pressure and the maximum operating pressure. 8. Test are in accordance with EN 61000-6-2. 9. CE-labelling is in accordance with 2004/108/EC. 10. The pressure transmitters must not be used as safety accessories according to article 1, 2.1.3 of the directive 97/23/EC. 11. Available for pressure ranges from 1 bar (15 psi) absolute upwards only. 12. Other sealing materials are available on request. ORDERING INFORMATION BTE/PTU (M) 6xxx x x (-FL) Calibration/Pressure connection BTE: mbar/bar calibration, 1/2" manometer thread (3/4" thread for flush mount versions) PTU: psi calibration, 1/4" NPT thread (1-12 UNF thread for flush mount versions) Flush mount version For mbar ranges only Pressure mode G: gage pressure1 A: absolute pressure (from 1 bar/15 psi) Pressure range BTE6000 series 200: 0...200 mbar 350: 0...350 mbar 001: 0...1 bar N01: -1...+1 bar P01: 0...-1 bar 002: 0...2 bar 005: 0...5 bar 010: 0...10 bar 016: 0...16 bar PTU6000 series 003: 0...3 psi 005: 0...5 psi 015: 0...15 psi N15: -15...+15 psi P15: 0...-15 psi 030: 0...30 psi 100: 0...100 psi 250: 0...250 psi Output signal 0: 0...10 V 1: 1...6 V 4: 4...20 mA 5: 0...20 mA Other pressure ranges and options are widely available. Please contact First Sensor. First Sensor reserves the right to make changes to any products herein. First Sensor does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. E / 11102 / B 6/6 www.first-sensor.com www.sensortechnics.com