RBR1L60A : Diodes

Schottky Barrier Diode
Data Sheet
RBR1L60A
lApplication
lDimensions (Unit : mm)
General rectification
lLand Size Figure (Unit : mm)
2.0
1) Small power mold type
(PMDS)
5.0±0.3
4.5±0.2
1.2±0.3
lFeatures
4.2
2.0
2.6±0.15
0.1±0.02
1
2
PMDS
2) High reliability
Cathode
3) Low VF
2.0±0.2
lStructure
1.5±0.2
ROHM : PMDS
JEDEC : SOD-106
1
2
: Manufacture Date
lConstruction
Anode
lTaping Dimensions (Unit : mm)
Silicon epitaxial planar type
2.0±0.05
fφ 1.55±0.05
0.3
12±0.2
5.5±0.05
5.3±0.1
0.05
9.5±0.1
1.75±0.1
4.0±0.1
fφ 1.55
2.9±0.1
4.0±0.1
2.8MAX
lAbsolute Maximum Ratings (Tc= 25°C)
Parameter
Symbol
Conditions
Limits
Unit
Repetitive peak reverse voltage
VRM
Duty≦0.5
60
V
Reverse voltage
VR
Direct reverse voltage
60
V
Average forward rectified current
Io
Glass epoxy board mounted, 60Hz half sin wave,
1
A
30
A
Non-repetitive forward current surge peak
IFSM
resistive load , Tc=130ºC Max.
60Hz half sin wave, one cycle,
non-repetitive at Ta=25ºC
Tj
-
150
°C
Tstg
-
-55 to +150
°C
Operating junction temperature
Storage temperature
lElectrical Characteristics (Tj= 25°C)
Parameter
Symbol
Conditions
Min.
Forward voltage
VF
IF=1.0A
-
-
0.53
V
Reverse current
IR
VR=60V
-
-
75
mA
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1/5
Typ. Max. Unit
2015.05 - Rev.A
Data Sheet
RBR1L60A
lElectrical Characteristic Curves
100000
10
Tj = 125°C
Tj = 150°C
REVERSE CURRENT : IR (mA)
FORWARD CURRENT : IF (A)
Tj = 150°C
Tj = 125°C
1
0.1
Tj = 75°C
Tj = 25°C
0.01
Tj = -25°C
10000
1000
100
Tj = 75°C
10
1
Tj = 25°C
0.1
Tj = -25°C
0.01
0.001
0.001
0
0 100 200 300 400 500 600 700 800 9001000
FORWARD VOLTAGE : VF(mV)
VF-IF CHARACTERISTICS
20
30
40
50
60
REVERSE VOLTAGE : VR(V)
VR-IR CHARACTERISTICS
1000
550
Tj = 25°C
f = 1MHz
FORWARD VOLTAGE : VF (mV)
CAPACITANCE BETWEEN
TERMINALS : Ct (pF)
10
100
10
Tj=25°C
IF=1.0A
n=30pcs
540
530
520
510
Ave. : 487.5mV
500
490
480
470
0
5
10
15
20
25
30
REVERSE VOLTAGE : VR(V)
VR-Ct CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
VF DISPERSION MAP
2/5
2015.05 - Rev.A
Data Sheet
RBR1L60A
lElectrical Characteristic Curves
200
Tj=25°C
VR=60V
n=30pcs
40
35
30
25
20
Ave. : 12.4mA
15
10
5
190
185
180
175
170
Ave. : 167pF
165
160
0
IR DISPERSION MAP
Ct DISPERSION MAP
35
350
IFSM
300
1cyc
8.3ms
Ta=25°C
250
200
150
Ave. : 88A
100
50
REVERSE RECOVERY TIME : trr (ns)
400
PEAK SURGE
FORWARD CURRENT : IFSM (A)
Tj=25°C
f=1MHz
VR=0V
n=10pcs
195
CAPACITANCE BETWEEN
TERMINALS : Ct (pF)
REVERSE CURRENT : IR (mA)
45
Tj=25°C
IF=0.1A
IR=0.1A
Irr / IR=0.1
n=10pcs
30
25
20
15
Ave. : 11.2ns
10
5
0
0
IFSM DISPERSION MAP
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
trr DISPERSION MAP
3/5
2015.05 - Rev.A
Data Sheet
RBR1L60A
lElectrical Characteristic Curves
1000
IFSM
PEAK SURGE
FORWARD CURRENT : IFSM (A)
PEAK SURGE
FORWARD CURRENT : IFSM (A)
1000
8.3 8.3
ms ms
1cyc
Ta=25°C
100
1cyc
IFSM
time
Ta=25°C
100
10
10
1
10
1
100
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
10
100
TIME : t (ms)
IFSM-t CHARACTERISTICS
1.2
2.5
Tj = 150°C
Tj = 150°C
2.0
0.8
REVERSE POWER
DISSIPATION : PR (W)
FORWARD POWER
DISSIPATION : PF (W)
1.0
D = 1/2
0.6
Sin(θ=180)
0.4
DC
0.2
0.0
1.5
Sin(θ=180)
1.0
D = 1/2
DC
0.5
0.0
0
0.5
1
1.5
2
0
AVERAGE RECTIFIED
FORWARD CURRENT : Io (A)
Io-PF CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
10
20
30
40
50
60
REVERSE VOLTAGE : VR (V)
VR-PR CHARACTERISTICS
4/5
2015.05 - Rev.A
Data Sheet
RBR1L60A
lElectrical Characteristic Curves
Glass epoxy board mounted
Rth(j-a)
100
Rth(j-c)
10
Glass epoxy board mounted
IM=100mA
IF=2.0A
1
time
AVERAGE RECTIFIED
FORWARD CURRENT : Io (A)
TRANSIENT
THERMAL IMPEDANCE : Rth (°C/W)
1000
3.0
IO
0A
0V
2.5
VR
T
2.0
D=t/T
VR=VRM/2
Tj=150°C
DC
1.5
D = 1/2
1.0
Sin(θ=180)
0.5
1ms 300ms
0.1
0.001
0.0
0.01
0.1
1
10
100
1000
0
3.0
t
T
DC
2.0
1.5
ELECTROSTATIC
DISCHARGE TEST : ESD (kV)
IO
0A
0V
VR
D=t/T
VR=VRM/2
Tj=150°C
D = 1/2
1.0
Sin(θ=180)
0.5
0.0
25
50
75
100
125
150
CASE TEMPERATURE : Tc (°C)
DERATING CURVE (Io-Tc)
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
75
100
125
150
25
20
15
10
Ave. : 2.1kV
5
0
0
50
30
Glass epoxy board mounted
2.5
25
AMBIENT TEMPERATURE : Ta (°C)
DERATING CURVE (Io-Ta)
TIME : t (s)
Rth-t CHARACTERISTICS
AVERAGE RECTIFIED
FORWARD CURRENT : Io (A)
t
Ave. : 1.3kV
C=200pF
R=0W
C=100pF
R=1.5kW
ESD DISPERSION MAP
5/5
2015.05 - Rev.A
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102A