ROHM RF1001T2D

Fast recovery diodes
RF1001T2D
Applications
General rectification
Dimensions (Unit : mm)
Structure
4.5±0.3
0.1
2.8±0.2
0.1
10.0±0.3
0.1
15.0±0.4
0.2
8.0±0.2
12.0±0.2
①
13.5MIN
1.2
1.3
Construction
Silicon epitaxial planar
8.0
(1) (2) (3)
5.0±0.2
Features
1) Cathode common type.
(TO-220)
2) Ultra Low VF
3) Very fast recovery
4) Low switching loss
0.8
(1) (2) (3)
0.7±0.1
0.05
2.6±0.5
ROHM : ＴO220FN
①
Absolute maximum ratings (Ta=25C)
Parameter
Reverse voltage (repetitive peak)
Reverse voltage (DC)
Average rectified forward current (*1)
Forward current surge peak (60Hz/1cyc)
Junction temperature
Storage temoerature
Manufacture Date
Symbol
VRM
VR
Io
IFSM
Limits
Unit
200
200
10
80
150
-55 to +150
V
V
A
A
C
C
Tj
Tstg
(*1)Business frequencies, Rating of R-load, Tc=126C. 1/2 Io per diode
Electrical characteristic (Ta=25C)
Parameter
Forward voltage
Reverse current
Reverse recovery time
Thermal impedance
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
Conditions
Symbol
VF
Min.
Typ.
Max.
-
0.87
0.93
V
IF=5A
IR
-
0.01
15
10
30
μA
ns
VR=200V
-
-
2.5
C/W
trr
 j-c
1/3
Unit
IF=0.5A,IR=1A,Irr=0.25*IR
JUNCTION TO CASE
2010.02 - Rev.D
RF1001T2D
Data Sheet
Electrical characteristics curves
10000
10
1000
Ta=150C
f=1MHz
Ta=-25C
Ta=75C
0.01
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
Ta=125C
0.1
Ta=125C
1000
Ta=25C
1
REVERSE CURRENT:IR(nA)
FORWARD CURRENT:IF(A)
Ta=150C
Ta=75C
100
Ta=25C
10
Ta=-25C
1
100
10
0.001
0 100 200 300 400 500 600 700 800 900 100 110 120
0 0 0
0.1
1
0
200
0
870
860
850
840
80
70
60
50
40
AVE:10.7nA
30
185
175
170
165
160
155
0
150
AVE:174.9pF
IR DISPERSION MAP
Ct DISPERSION MAP
1000
200
150
100
50
Ta=25C
IF=0.5A
IR=1A
Irr=0.25*IR
n=10pcs
25
20
Ifsm
PEAK SURGE
FORWARD CURRENT:IFSM(A)
RESERVE RECOVERY TIME:trr(ns)
250
30
180
10
30
8.3ms
100
15
10
5
8.3ms
1cyc
10
AVE:14.5ns
AVE:167.0A
1
0
0
1
100
TRANSIENT
THAERMAL IMPEDANCE:Rth (C/W)
1cyc
8.3ms
100
10
10
TIME:t(ms)
IFSM-t CHARACTERISTICS
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
100
20
Mounted on epoxy board
IF=5A
IM=100mA
15
Rth(j-a)
10
1ms
time
300us
Rth(j-c)
1
0.1
0.001
100
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
FORWARD POWER
DISSIPATION:Pf(W)
1000
Ifsm
10
trr DISPERSION MAP
IFSM DISPERSION MAP
1
190
20
VF DISPERSION MAP
300
25
Ta=25C
f=1MHz
VR=0V
n=10pcs
195
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
880
5
10
15
20
REVERSE VOLTAGE:V R(V)
VR-Ct CHARACTERISTICS
200
Ta=25C
VR=200V
n=30pcs
90
REVERSE CURRENT:IR(nA)
Ta=25C
IF=5A
n=30pcs
AVE:857.4mV
PEAK SURGE
FORWARD CURRENT:IFSM(A)
150
100
890
PEAK SURGE
FORWARD CURRENT:IFSM(A)
100
REVERSE VOLTAGE:V R(V)
VR-IR CHARACTERISTICS
FORWARD VOLTAGE:VF(mV)
VF-IF CHARACTERISTICS
FORWARD VOLTAGE:V F(mV)
50
DC
D=1/2
Sin(θ=180)
10
5
0
0.01
0.1
1
10
TIME:t(s)
Rth-t CHARACTERISTICS
2/3
100
1000
0
5
10
15
20
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
Io-Pf CHARACTERISTICS
2010.02 - Rev.D
RF1001T2D
30
Io
0V
VR
t
D=t/T
VR=100V
20
T
DC
15
Tj=150C
D=1/2
10
Sin(=180)
5
30
25
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
25
0A
0A
Io
0V
VR
t
20
DC
15
T
D=t/T
VR=100V
Tj=150C
D=1/2
10
Sin(=180)
5
0
25
50
75
100
125
AMBIENT TEMPERATURE:Ta(C)
Derating Curve"(Io-Ta)
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
150
No break at 30kV
20
15
10
5
0
0
0
No break at 30kV
25
ELECTROSTATIC
DISCHARGE TEST ESD(KV)
30
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
Data Sheet
0
25
50
75
100
125
CASE TEMPARATURE:Tc(C)
Derating Curve"(Io-Tc)
3/3
150
C=200pF
R=0
C=100pF
R=1.5k
ESD DISPERSION MAP
2010.02 - Rev.D
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A