SKY65228-11: WLAN 802.11n Single Band 4.9

DATA SHEET
SKY65228-11: WLAN 802.11n Single Band 4.9–5.85 GHz
MIMO Intera™ Front-End Module
Features
●
●
●
●
●
●
●
●
●
●
●
●
●
Description
Single band 4.9–5.85 GHz MIMO architecture
Two full 4.9–5.85 GHz transmit/receive chains
Backward-compatible with 802.11a standards
Pin compatible with SKY65225-11 (4.9–5.85 GHz)
POUT @ 2.5% EVM: 16 dBm (-11a)
Gain matching: <2 dB
Internal voltage regulation
Single 3.0–3.6 V power supply
Temperature-compensated PA bias networks
Separate digital controls for each PA
Temperature-compensated directional power detection
Package size: 10 x 14 x 0.9 mm
Lead (Pb)-free and RoHS-compliant MSL-3 @ 250 °C
per JEDEC J-STD-020
The SKY65228-11 Intera nFEM contains two complete
4.9–5.85 GHz transmit/receive chains in one compact RF front-end
module optimized for single band 4.9–5.85 GHz MIMO (multiple
in—multiple out) operation, in compliance with the 802.11n draft
standard. The SKY65228-11 includes two 4.9–5.85 GHz PAs with
integrated input filtering for 3–4 GHz rejection, and temperaturecompensated, directional power detector with 20 dB dynamic
range. Also included are low loss, high rejection GaAs harmonic
filters and T/R switches which provide high linearity in all transmit
paths and low loss in all receive paths.
The SKY65228-11 Intera nFEM achieves outstanding gain
matching which is a critical requirement for MIMO operation.
This is accomplished though mirrored layout symmetry.
The SKY65228-11 is packaged in a lead (Pb)-free, RoHS-compliant
laminate package, which measures 10 x 14 x 0.9 mm. This
FEM is designed as a pin to pin compatible version of the
SKY65225-11 for 4.9–5.85 GHz only.
NEW
Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
Functional Block Diagram
R0a
4.9–5.85 GHz
A0
Dir
Det
T0a
PD0a
PU0a
PU1a
PA
Controller
PD1a
Dir
Det
T1a
4.9–5.85 GHz
A1
R1a
BUY
NOW
Innovation to GoTM
Now available for purchase online.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200557 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 14, 2007
1
DATA SHEET • SKY65228-11
Absolute Maximum Ratings
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
V
VCC
VCC
-0.3
5.5
PU0a, PU1a
PU
-0.3
5.5
V
10
dBm
ºC
T0a,T1a
RFin
Operating temperature range
TOP
0
85
TSTO
-65
Storage temperature range
Moisture sensitivity level
Thermal resistance
125
ºC
MSL-3
250
°C
θJC
60
°C/W
Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty.
Recommended Operating Conditions
Min.
Typ.
Max.
Supply Voltage
Parameter
Symbol
VCC
Condition
3
3.3
3.6
Unit
V
Operating Temperature
TOP
0
25
85
ºC
Max.
Unit
DC Characteristics
Conditions: VCC = 3.3 V, TOP = 25 ºC. Measurements made on Skyworks EVB with all losses de-embedded.
All unused ports terminated into 50 Ω unless otherwise specified.
Parameter
Symbol
Condition
Min.
Typ.
Total 802.11a Tx supply current, T0a or T1a
ICC-a
POUT = 15 dBm, 54 Mbps OFDM,
PU0g or PU1g = 0 V
PU0a or PU1a = 3.3 V
180
mA
Total 802.11a Tx quiescent current, T0a or T1a
ICQ-a
No RF
135
mA
PA Logic Characteristics
Conditions: VCC = 3.3 V, TOP = 25 ºC. Measurements made on Skyworks EVB with all losses de-embedded.
All unused ports terminated into 50 Ω unless otherwise specified.
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Logic high voltage for PU0a, PU1a (Tx On)
2
VCC
V
Logic low voltage for PU0a, PU1a (Tx Off)
0
0.5
V
200
µA
Input current logic high voltage for PU0a, PU1a
100
Input current logic low voltage for PU0a, PU1a
0.2
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
May 14, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200557 Rev. B
µA
DATA SHEET • SKY65228-11
Switch Characteristics
Conditions: VCC = 3.3 V, TOP = 25 ºC. Measurements made on Skyworks EVB with all losses de-embedded.
All unused ports terminated into 50 Ω unless otherwise specified.
Min.
Typ.
Max.
Unit
Control voltage - ON state
Parameter
VCTL_on
Symbol
Condition
3
3.3
3.6
V
Control voltage - OFF state
VCTL_off
0
Control current - ON state
ICTL_on
RF ON
Control current - ON state
ICTL_on
RF OFF
0.2
V
10
75
uA
2
20
uA
Mode Control Voltage Table (V)
Mode
VCC
PU0a
Rx0a
Tx0a
PU1a
Rx1a
Tx1a
Sleep
3.3
0
0
0
0
0
0
0
T0a - ANT0
3.3
3.3
0
3.3
0
0
R0a - ANT0
3.3
0
3.3
0
0
0
0
T1a - ANT1
3.3
0
0
0
3.3
0
3.3
R1a - ANT1
3.3
0
0
0
0
3.3
0
T0a - ANT0 & T1a - ANT1
3.3
3.3
0
3.3
3.3
0
3.3
R0a - ANT0 & R1a - ANT1
0 or 3.3
0
3.3
0
0
3.3
0
802.11n Operation
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This
device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the
human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be employed
at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200557 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 14, 2007
3
DATA SHEET • SKY65228-11
802.11a Transmit Specifications (Tx Chain 0, Tx Chain 1)
Conditions: VCC = 3.3 V, TOP = 25 ºC. PA enables and control voltages set according to Mode Control Voltage table.
Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 Ω unless
otherwise specified.
Parameter
Symbol
Frequency range
Condition
F
Plin_a
54 Mbps OFDM, 64 QAM, EVM = 2.5 %
Backed off EVM
BEVM
54 Mbps OFDM, 64 QAM, Pin = 7dBm
1 dB compression point
P1 dB
Max.
5.85
16
21.5
lS21l
Smal signal gain variation over any 20 MHz band
Typ.
4.9
Linear output power - a
Small signal gain
Min.
lS21l - M
Gain, 3.2–3.9 GHz
lS21l - 3.9
1.5
%
24
dBm
24
dB
0.5
Compared frequency by frequency
GHz
dBm
l∆S21l
Gain matching, T0g to A0 vs. T1g to A1
Unit
dB
2
dB
0
dB
Harmonics
2f, 3f
POUT = 18 dBm, 1 Mbps, CCK, 802.11b
Tx switching time
t_sw
50 % of VCTL to 90/10 % RF output
power level
-50
-42
dBm/MHz
500
ns
Input return loss
lS11l
T0a or T1a
-6
dB
Output return loss
lS22l
A0 or A1
-10
dB
Isolation between T0g and A1
ISO-A1
CW power into T0a and measure ratio
of power at A0 to A1
-25
dBc
Isolation between T1g and A0
ISO-A0
CW power into T1a and measure ratio
of power at A1 to A0
-25
dBc
Stability
STAB
POUT < 18 dBm, load VSWR = 3:1
All non-harmonically related outputs
less than -50 dBc/1 MHz
802.11a Receive Specifications (Rx Chain 0, Rx Chain 1)
Conditions: VCC = 3.3 V, TOP = 25 ºC. PA enables & Tx control voltages = 0 V. Rx0ag or Rx1ag = 3.3 V. Measurements made
on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 Ω unless otherwise specified.
Parameter
Symbol
Frequency range
Condition
F
Insertion loss
lS21l
Input return loss
lS11l
Output return loss
lS22l
Insertion loss delta
l∆S21l
Min.
Typ.
4.9
Max.
Unit
5.85
GHz
2.5
R0g or R1g
-20
A0 or A1
-15
3
dB
dB
dB
A0 to R0g and A1 to R1g
0.5
dB
802.11a Power Detector Specification
Conditions: VCC = 3.3 V, TOP = 25 ºC. PU0a and Tx0ag or PU1a and Tx1ag = 3.3 V. RX0ag or RX1ag = 0 V. Measurements
made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 Ω unless otherwise specified.
Parameter
Frequency range
Symbol
Condition
F
Power detect range
PDR
Power detector accuracy
DC load impedance
PDacc5
A0 or A1
Min.
Typ.
Max.
4.9
5.85
GHz
0
20
dBm
3
kΩ
Over 3:1 VSWR
0.7
dB
Zload
Output voltage, no RF
0.90
Output voltage, 18 dBm
0.35
Power detector -3 dB corner frequency
LPF-3 dB
10 kΩ load
270
300
V
V
400
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
Unit
May 14, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200557 Rev. B
kHz
DATA SHEET • SKY65228-11
Typical Performance Data (4.9–5.85 GHz)
6
28
5
27
4
26
Gain (dB)
Error Vector Magnitude (%)
VCC = 3.3 V, TA = 25 °C, OFDM 54 Mbps, Z0 = 50 Ω, unless otherwise noted
3
25
2
24
1
23
22
0
4800
5000
5200
5400
5600
5800
4800
6000
5000
5200
5400
5600
Frequency (GHz)
Frequency (GHz)
EVM vs. Frequency (POUT = 15 dBm)
Gain vs. Frequency
4.9
5.3
5.7
5.0
5.4
5.8
5.1
5.5
5.9
4.9
5.3
5.7
5.2
5.6
30
6
5.0
5.4
5.8
5800
5.1
5.5
5.9
6000
5.2
5.6
28
27
4
Gain (dB)
Error Vector Magnitude (%)
29
5
3
2
26
25
24
23
22
1
21
20
0
0
2
4
6
4
6
8 10 12 14 16 18 20 22
Output Power (dBm)
EVM vs. Output Power
Gain vs. Output Power
5.0
5.4
5.8
5.1
5.5
5.9
4.9
5.3
5.7
5.2
5.6
350
5.0
5.4
5.8
5.1
5.5
5.9
5.2
5.6
300
Supply Current (mA)
0.85
Detector Voltage (V)
2
Output Power (dBm)
4.9
5.3
5.7
0.95
0
8 10 12 14 16 18 20 22
0.75
0.65
0.55
0.45
250
200
150
100
50
0
0.35
0
2
4
6
8 10 12 14 16 18 20 22
0
2
4
6
8 10 12 14 16 18 20 22
Output Power (dBm)
Output Power (dBm)
Detector Voltage vs. Output Power
Supply Current vs. Output Power
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200557 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 14, 2007
5
DATA SHEET • SKY65228-11
VCC
PU0a
NC
PD0a
GND
VCC
GND
Rx0a
Tx0a
Pin Descriptions
GND
Pin Out
48
47
46
45
44
43
42
41
40
39
NC
1
38
GND
GND
2
37
GND
R0a
3
36
A0
GND
4
35
GND
NC
5
34
GND
T0a
6
33
GND
GND
7
32
GND
GND
8
31
GND
T1a
9
30
GND
49
GND
NC
10
29
GND
GND
11
28
GND
15
16
17
18
19
20
21
22
23
24
GND
Tx1a
GND
Rx1a
25
VCC
14
GND
NC
PD1a
GND
VCC
A1
26
PU1a
27
13
NC
12
GND
R1a
GND
Pin #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Pin Name
NC
GND
ROa
GND
NC
T0a
GND
GND
T1a
NC
GND
R1a
GND
NC
GND
NC
PU1a
VCC
Description
No connection
Ground
Receiver output
Ground
No connection
Transmitter input
Ground
Ground
Transmitter input
No connection
Ground
Receiver output
Ground
No connection
Ground
No connection
Power amplifier enable input
3.3 V
19
PD1a
20
21
GND
VCC
Power detector output voltage
from PA1
Ground
3.3 V
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
GND
Rx1a
Tx1a
GND
GND
A1
GND
GND
GND
GND
GND
GND
GND
GND
A0
GND
GND
Tx0a
Rx0a
GND
VCC
Ground
Switch control input
Switch control input
Ground
Ground
Antenna 1
Ground
Ground
Ground
Ground
Ground
Ground
Ground
Ground
Antenna 0
Ground
Ground
Switch control input
Switch control input
Ground
3.3 V
43
44
GND
PD0a
45
46
47
48
49
NC
PU0a
VCC
GND
GND
Ground
Power detector output voltage
from PA0
No connection
Power amplifier enable input
3.3 V
Ground
Ground
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
6
May 14, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200557 Rev. B
EVB Label
NC
GND
R0a
GND
NC
T0a
GND
GND
T1a
NC
GND
R1a
GND
NC
GND
NC
VEN1a
None.
Tied to Pin 47
VD1ag
GND
None.
Tied to Pin 47
GND
Rx1ag
Tx1ag
GND
GND
A1
GND
GND
GND
GND
GND
GND
GND
GND
A0
GND
GND
Tx0ag
Rx0ag
GND
None.
Tied to Pin 47
GND
VDOag
VEN0g
VEN0a
VCC
GND
GND
DATA SHEET • SKY65228-11
Recommended Footprint
Solder Mask
10.34 mm
Pin 47
0.425 mm
10.44 mm
24X 0.5 mm
Pin 48
24X 0.75 mm
48X 0.6 mm
0.425 mm
0.20 X 45
48X 0.85 mm
Pin 1
Pin 1
0.175 mm
Typ.
0.85 mm Typ.
0.85 mm Typ.
6X 2.1 mm
6X 5 mm
6X 0.725 mm
1.4 mm
0.35 mm
CL
CL
1.4 mm
0.7 mm
14.44 mm
0.425 mm
14.34 mm
2.2 mm Typ.
0.25 mm
Typ.
CL
2X 1.525 mm
0.7 mm
Thermal Via Array
0.3 mm on 0.7 mm Pitch
0.35mm
Additional Vias in Common Ground
Pad Will Improve Thermal Performance
2X 1.875 mm
CL
Package Outline
2 mm Typ.
8X 2.3 mm 2X 4.075 mm
Thermal vias should be tented and filled with solder mask 30–35 µm
copper plating recommended.
Stencil Pattern
0.20 X 45 mm
10.34 mm
48X 0.5 mm
0.425 mm
48X 0.75 mm
0.85 mm Typ.
6X 5 mm
0.425 mm
CL
14.34 mm
6X 2.1 mm
Stencil Aperture
Size of 80–100%
of the Module/Pkg.
Solder Mask Openings
Package
Outline
CL
8X 2.3 mm
2X 2.975 mm
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200557 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 14, 2007
7
DATA SHEET • SKY65228-11
Package Outline
Pin 1 Indicator
14 ± 0.1
Skyworks
SKY65228-11
Lot #
YYWWCC
10 ± 0.1
0.9 ± 0.1
Side View
48x SMT Pad
Pin 48
0.2x45
Pin 1 Indicator
0
28x 4.92
4x 3.825
4x 2.125
Top View
Pin 1
See Detail B
See Detail C
See Detail D
4x 0.425
6x 5
A
6x 2.1
0
4x 1.275
4x 2.975
4x 4.675
4x 2.125
4x 3.825
4x 5.525
15x Solder
Mask Openings
4x 0.424
6x 2.975
8x 2.3
4x 1.275
20x 6.92
Bottom View
0.5 ± 0.075
(0.1)
Metal
Pad Edge
0.5 ± 0.03
R 0.05
Max.
2.2 ± 0.03
2 ± 0.03
Detail A
Pad Scale: 2X
14X Rotated 180°
10X Rotated 90° CW
10X Rotated 90° CCW
3.05 ± 0.03
2.2 ± 0.03
R 0.05 Max.
1.45 ± 0.03
Detail C
Scale: Full
Detail B
Scale: Full
12X
R 0.05 Max.
1.45 ± 0.03
Detail D
Scale: Full
2X
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
8
May 14, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200557 Rev. B
DATA SHEET • SKY65228-11
Copyright © 2006, 2007, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, “Breakthrough Simplicity” and Intera are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200557 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 14, 2007
9