200751A.pdf

ADVANCED DATA SHEET
SKY65256-11: WLAN 802.11a, b, g, n
Dual-Band, Front-End Module Single Antenna
Features
Description
2.4 to 2.5 GHz and 4.9 to 5.9 GHz Operation
● Cardbus, mini PCI, PCIe and AP applications
● P
OUT @ 3.0% EVM (OFDM54):
16 dBm (a), 21 dBm (b), 18 dBm (g)
● Gain: 24 dB (a), 27 dB (b,g)
● Integrated PA, filters, directional detector and SPDT switch
● Single supply voltage : 3.0 to 3.6 V
● Single antenna
● Small, ultra thin package 5 x 6 x 0.9 mm
● Lead (Pb)-free and RoHS-compliant
The SKY65256-11 FEM contains one complete dual-band
transmit/receive chain in a compact RF front-end module. It
includes one 5 GHz PA and one 2 GHz PA each with integrated
input filtering for 3–4 GHz rejection, and temperature-compensated
directional power detector with 20 dB dynamic range. Also
included are low loss, high rejection diplexers and a diversity
switch which provide high linearity in transmit and low loss in
receive paths. All RF ports are matched to 50 Ω.
●
NEW
The SKY65256-11 is packaged in a lead (Pb)-free, RoHS-compliant
laminate package, which measures 30 mm2.
Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
30
29
28
27
VCTRL2
NC
GND
NC
NC
NC
Functional Block Diagram
26
25
GND
1
24
VCTRL1
2Rx
2
23
GND
GND
3
22
ANT
21
GND
20
NC
19
NC
18
GND
17
NC
16
PDET
Rx
5Rx
DIPX
4
SPDT
Dir.
Det.
PA
GND
Tx
5
Bias
Circuit
2Tx
6
Dir.
Det.
DIPX
PA
7
10
11
12
13
14
15
VEN2
NC
9
VEN5
GND
GND
8
VCC
5Tx
Bias
Circuit
NC
GND
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200751 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • September 28, 2007
1
ADVANCED DATA SHEET • SKY65256-11
Absolute Maximum Ratings
Parameter
Symbol
VCC
Condition
VCC
VEN2, VEN5
Min.
Typ.
Max.
Unit
-0.3
5.5
V
-0.3
3.6
V
10
dBm
2Tx, 5Tx
Operating temperature range
TOP
-20
85
ºC
Storage temperature range
TSTO
-65
150
ºC
Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty.
Recommended Operating Conditions
Parameter
Supply voltage
Reference voltage
Operating temperature
Symbol
Min.
Typ.
Max.
VCC
Condition
3
3.3
3.6
Unit
V
VEN2, VEN5
2.8
2.9
3.0
V
TOP
-10
25
85
ºC
Max.
Unit
DC Characteristics
Conditions: VCC = 3.3 V, TOP = 25 ºC. Measurements made on Skyworks EVB with all losses de-embedded.
All unused ports terminated into 50 Ω unless otherwise specified.
Parameter
Symbol
Condition
Total 802.11g Tx supply current
ICC-g
POUT = 18 dBm, 54 Mbps OFDM,
VEN2 = 2.9 V, VCC = 3.3 V
VEN5 = 0 V
Min.
Typ.
180
mA
Total 802.11g Tx quiescent current
ICQ-g
No RF
95
mA
Total 802.11b Tx supply current
ICC-b
POUT = 20 dBm, 11 Mbps CCK
VEN2 = 2.9 V, VCC = 3.3 V
VEN5 = 0 V
220
mA
Total 802.11a Tx supply current, T0a or T1a
ICC-a
POUT = 15 dBm, 54 Mbps OFDM,
VEN5 = 2.9 V, VCC = 3.3 V
VEN2 = 0 V
170
mA
Total 802.11a Tx quiescent current, T0g or T1g
ICQ-a
No RF
130
mA
PA Logic Characteristics
Conditions: VCC = 3.3 V, TOP = 25 ºC. Measurements made on Skyworks EVB with all losses de-embedded.
All unused ports terminated into 50 Ω unless otherwise specified.
Parameter
Min.
Typ.
Max.
Unit
VEN2, VEN5
2.8
2.9
3.0
V
Reference voltage low
VEN2, VEN5
0
Reference current high
IEN2, IEN5
5
mA
Reference current low
IEN2, IEN5
20
µA
Reference voltage high
Symbol
Condition
0.3
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
September 28, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200751 Rev. A
V
ADVANCED DATA SHEET • SKY65256-11
Switch Characteristics
Conditions: VCC = 3.3 V, TOP = 25 ºC. Measurements made on Skyworks EVB with all losses de-embedded.
All unused ports terminated into 50 Ω unless otherwise specified.
Min.
Typ.
Max.
Control voltage - ON state
Parameter
VCTL_on
Symbol
Condition
3
3.3
3.6
Unit
V
Control voltage - OFF state
VCTL_off
0
0.2
V
Control current - ON state
ICTL_on
RF ON
10
75
uA
Control current - ON state
ICTL_on
RF OFF
2
20
uA
Truth Table
VEN 5 (V)
VEN 2 (V)
VCC (V)
5Tx to ANT
Mode
VCTRL1 (V) VCTRL2 (V)
0
3
2.9
0
3.3
2Tx to ANT
0
3
0
2.9
3.3
ANT to 5Rx
3
0
0
0
3.3
ANT to 2Rx
3
0
0
0
3.3
CAUTION: Although this device is designed to be as robust as
possible, Electrostatic Discharge (ESD) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce potentials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions should be
employed at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200751 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • September 28, 2007
3
ADVANCED DATA SHEET • SKY65256-11
802.11b,g Transmit Specifications
Conditions: VCC = 3.3 V, TOP = 25 ºC. PA enables and control voltages set according to Truth Table. Measurements
made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 Ω unless
otherwise specified.
Parameter
Frequency range
Symbol
Condition
F
Min.
Typ.
2.4
Linear output power - g
Plin_g
54 Mbps OFDM, 64 QAM, EVM = 3.0 %
Compliant output power - b
POUT_b
11 Mbps CCK
2.5
Unit
GHz
18
dBm
21
dBm
25
dBm
1 dB compression point
P1 dB
Small signal gain
lS21l
27
dB
∆lS21l
2
dB
dB
Small signal gain variation over frequency band
22.5
Max.
Gain, 3.2–3.3 GHz
lS21l - 3.2
0
Gain, 1.6 GHz
lS21l - 1.6
15
Harmonics
2f, 3f
POUT = 18 dBm, 1 Mbps, CCK, 802.11b
Tx switching time
t_sw
50 % of VCTL to 90/10 % RF output
-50
dB
-42
dBm/MHz
500
ns
Input return loss
lS11l
-10
dB
Output return loss
lS22l
-8
dB
Stability
STAB
POUT < 18 dBm, load VSWR = 3:1
All non-harmonically related outputs
less than -50 dBc/1 MHz
802.11b,g Receive Specifications
Conditions: VCC = 3.3 V, TOP = 25 ºC. PA enables and control voltages set according to Truth Table. Measurements made on
Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 Ω unless
otherwise specified.
Parameter
Frequency range
Symbol
Condition
F
Insertion loss
Input/output return loss
Min.
Typ.
2.4
Max.
Unit
2.5
GHz
lS21l
1.6
lS11l, lS22l
-15
dB
23
dB
Antenna to Rx isolation
PA off
2.2
dB
802.11b,g Power Detector Specification
Conditions: VCC = 3.3 V, TOP = 25 ºC. PA enables and control voltages set according to Truth Table. Measurements made on
Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 Ω unless
otherwise specified.
Parameter
Power detect range
Power detector accuracy
Symbol
Condition
PDR
Ant 0 or Ant 1
PDacc2
Over 3:1 VSWR
Voltage limits
Over power range
Min.
Typ.
5
Max.
Unit
22
dBm
±1
0.1
Voltage range
dB
1.1
V
400
kHz
0.6
Power detector -3 dB corner frequency
LPF-3 dB
10 kΩ load
270
300
V
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
September 28, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200751 Rev. A
ADVANCED DATA SHEET • SKY65256-11
802.11a Transmit Specifications
Conditions: VCC = 3.3 V, TOP = 25 ºC. PA enables and control voltages set according to Mode Control Voltage table.
Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 Ω unless
otherwise specified.
Parameter
Symbol
Frequency range
Condition
F
Min.
Typ.
4.9
5.85
Unit
GHz
Linear output power - a
Plin_a
1 dB compression point
P1 dB
Small signal gain
lS21l
∆lS21l
2
dB
Gain, 7.25 GHz
lS21l - 7.25
7
dB
Gain, 3.2–3.9 GHz
lS21l - 3.9
0
dB
Gain, 1.6 GHz
lS21l - 1.6
5
Small signal gain variation over any 20 MHz band
54 Mbps OFDM, 64 QAM, EVM = 3.0 %
Max.
21.5
Harmonics
2f, 3f
POUT = 15 dBm, 54 Mbps OFDM
Tx switching time
t_sw
50 % of VCTL to 90/10 % RF output
power level
16
dBm
24
dBm
25
dB
-50
dB
-42
dBm/MHz
500
nS
Input return loss
lS11l
-6
dB
Output return loss
lS22l
-10
dB
Stability
STAB
POUT < 15 dBm, load VSWR = 3:1
All non-harmonically related outputs
less than -50 dBc/1 MHz
802.11a Receive Specifications (Rx Chain 0, Rx Chain 1)
Conditions: VCC = 3.3 V, TOP = 25 ºC. PA enables and control voltages set according to Mode Control Voltage table.
Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 Ω unless
otherwise specified.
Parameter
Symbol
Frequency range
Condition
F
Insertion loss
Min.
Typ.
4.9
lS21l
2.5
Input/output return loss
lS11l, lS22l
-15
Antenna to Rx isolation
lS22l
PA off
55
Max.
Unit
5.85
GHz
3
dB
dB
dB
802.11a Power Detector Specification
Conditions: VCC = 3.3 V, TOP = 25 ºC. PA enables and control voltages set according to Mode Control Voltage table.
Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 Ω unless
otherwise specified.
Parameter
Power detect range
Power detector accuracy
Symbol
Condition
PDR
Ant 0 or Ant 1
PDacc2
Over 3:1 VSWR
Voltage limits
Over power range
Min.
Typ.
5
Max.
Unit
22
dBm
±1
0.1
Voltage range
dB
1.1
V
400
kHz
0.6
Power detector -3 dB corner frequency
LPF-3 dB
10 kΩ load
270
300
V
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200751 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • September 28, 2007
5
ADVANCED DATA SHEET • SKY65256-11
Typical Performance Data (2.4–2.5 GHz)
VCC = 3.3 V, TA = 25 °C, OFDM 54 Mbps, Z0 = 50 Ω, unless otherwise noted
5.0
30
25
4.0
3.5
20
Gain (dB)
Error Vector Magnitude (%)
4.5
3.0
2.5
2.0
15
10
1.5
1.0
5
0.5
0
2350
0
2350
2400
2500
2550
2450
2500
Frequency (GHz)
EVM vs. Frequency
Gain vs. Frequency
2.45
2.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
2.4
2.45
2.5
25
Gain (dB)
20
15
10
5
0
2
2.4
4
6
8 10 12 14 16 18 20 22
0
2
4
6
8 10 12 14 16 18 20 22
Output Power (dBm)
Output Power (dBm)
EVM vs. Output Power
Gain vs. Output Power
2.45
2.5
2.4
0.9
0.8
Supply Current (A)
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
2.45
2.5
0.30
0.28
0.26
0.24
0.22
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
0
2
4
6
8 10 12 14 16 18 20 22
Output Power (dBm)
POUT (dBm)
Detector Voltage vs. Output Power
Supply Current vs. Output Power
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
2550
30
0
Detector Voltage (V)
2400
Frequency (GHz)
2.4
Error Vector Magnitude (%)
2450
September 28, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200751 Rev. A
ADVANCED DATA SHEET • SKY65256-11
Typical Performance Data (4.9–5.85 GHz)
VCC = 3.3 V, TA = 25 °C, OFDM 54 Mbps, Z0 = 50 Ω, unless otherwise noted
5.0
30
25
4.0
3.5
20
Gain (dB)
Error Vector Magnitude (%)
4.5
3.0
2.5
2.0
15
10
1.5
1.0
5
0.5
0
4900 5000 5100 5200 5300 5400 5500 5600 5700 5800 5900
0
8.0
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
0.8
4.9 GHz
5.0 GHz
5.6 GHz
Frequency (GHz)
Frequency (GHz)
EVM vs. Frequency
Gain vs. Frequency
5.1 GHz
5.2 GHz
5.7 GHz
5.4 GHz
5.3 GHz
5.8 GHz
5.85 GHz
5.5 GHz
5.9 GHz
30
5.1 GHz
5.2 GHz
5.7 GHz
5.4 GHz
5.3 GHz
5.8 GHz
5.85 GHz
5.5 GHz
5.9 GHz
20
15
10
5
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Output Power (dBm)
Output Power (dBm)
EVM vs. Output Power
Gain vs. Output Power
4.9 GHz
5.0 GHz
5.6 GHz
5.1 GHz
5.2 GHz
5.7 GHz
5.4 GHz
5.3 GHz
5.8 GHz
5.85 GHz
5.5 GHz
5.9 GHz
Supply Current (A)
0.7
Detector Voltage (V)
4.9 GHz
5.0 GHz
5.6 GHz
25
Gain (dB)
Error Vector Magnitude (%)
4900 5000 5100 5200 5300 5400 5500 5600 5700 5800 5900
0.6
0.5
0.4
0.3
0.2
0.1
0.30
0.28
0.26
0.24
0.22
0.20
0.18
0.16
0.14
0.12
0.10
0.08
4.9 GHz
5.0 GHz
5.6 GHz
5.1 GHz
5.2 GHz
5.7 GHz
5.4 GHz
5.3 GHz
5.8 GHz
5.85 GHz
5.5 GHz
5.9 GHz
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Output Power (dBm)
POUT (dBm)
Detector Voltage vs. Output Power
Supply Current vs. Output Power
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200751 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • September 28, 2007
7
ADVANCED DATA SHEET • SKY65256-11
NC
GND
NC
VCTRL2
30
Pin Descriptions
NC
NC
Pin Out (Top View)
29
28
27
26
25
GND
1
24
VCTRL1
2Rx
2
23
GND
GND
3
22
ANT
5Rx
4
21
GND
GND
5
20
NC
2Tx
6
19
NC
GND
7
18
GND
5Tx
8
17
GND
9
16
GND
VCTRL2
Application Circuit
30
5Rx
GND
2Tx
GND
5Tx
GND
26
1
GND
Ground
2
2Rx
Low-band receive output port. Internally
matched to 50 Ω and DC blocked. No
external DC block required.
3
GND
Ground
4
5Rx
High-band receive output port. Internally
matched to 50 Ω and DC blocked. No
external DC block required.
5
GND
Ground
6
2Tx
Low-band transmit input port. Internally
matched to 50 Ω and DC blocked. No
external DC block required.
7
GND
Ground
8
5Tx
High-band transmit input port. Internally
matched to 50 Ω f and DC blocked. No
external DC block required.
9
GND
Ground
10
NC
No connection inside the module.
11
VCC
Power supply 3.3 V
12
GND
Ground
13
VEN5
External reference voltage for the
high-band PA.
14
VEN2
External reference voltage for the
low-band PA.
15
NC
No connection inside the module.
16
PDET
Directional power detector output.
No connection inside the module.
25
VCTRL1
Description
1
24
2
23
3
22
4
21
5
20
17
NC
6
19
18
GND
Ground
7
18
19
NC
No connection inside the module.
8
17
20
NC
No connection inside the module.
9
16
21
GND
Ground
22
Ant
Antenna RF port. Internally matched to 50 Ω.
External DC block required.
11
13
12
GND
10
14
15
VEN2
GND
27
VEN5
GND
2Rx
28
29
Symbol
15
NC
14
VEN2
13
VEN5
12
VCC
11
GND
NC
10
NC
PDET
Pin Number
VCC
4.7 µF
Branding Specifications
Pin 1 Indicator
Skyworks
Part No.
Vendor
Assembly
Number
GND
12 pF
GND
GND
PDET
ANT
23
GND
Ground
24
VCTL1
Digital control input for SPDT switch
25
VCTL2
Digital control input for SPDT switch
26
GND
Ground
27
GND
Ground
28
NC
No connection inside the module.
29
NC
No connection inside the module.
30
NC
No connection inside the module.
SKY65256-11
Top View
Date Code
YY = Calendar Year
WW = Week
CC = Country
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
8
September 28, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200751 Rev. A
ADVANCED DATA SHEET • SKY65256-11
Package Dimensions
0 8X 1
Solder Mask
Opening
See Detail C
Pin 30
Pin 1 Indicator
See Detail B
Pin 1
4X 1.875
Mold
4X 0.625
0
6X 0.5
MCM
Substrate
4X 1.25
6X 1.5
4X 2.5
12X 2.9
A
30X SMT Pad
18X 2.4
4X 1.5625
4X 0.3125
0.85 ± 0.1
5
Pin 1
Indicator
2X R(0.05)
0.425 ± 0.075
0.1
0.425 ± 0.025
0.525 ± 0.03
6
Detail A
0.875
0.875
0.2 x 45°
Solder Mask Edges
0.875
5X R0.05 Max.
0.875
4X R0.05 Max.
Solder Mask Edges
Detail B
Detail C
Recommended Solder Reflow Profiles
Refer to the “Recommended Solder Reflow Profile”
Application Note.
Tape and Reel Information
Refer to the “Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation” Application Note.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200751 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • September 28, 2007
9
ADVANCED DATA SHEET • SKY65256-11
Copyright © 2006, 2007, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and
names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
10
September 28, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200751 Rev. A