p 7 fast Ethernet 10/100 RJ45 ports p 1 Gigabit Ethernet 10/100/1000 RJ45 port p 2 Gigabit combo ports for copper or fiber PRODUCT DATASHEET SLX-10MG-1 SLX-10MG-1 Managed Industrial Ethernet Switch PRODUCT DATASHEET n High port count in a small footprint n Truly rugged design with -40 to 75°C operation PRODUCT DATASHEET Sixnet Networking Series Easy to configure management functions SLX-10MG-1 n 10 PORT Real-Time-Ring™ INDUSTRIAL ETHERNET MANAGED SWITCH or Rapid Spanning Tree (RSTP) Two Flexible Combination Gigabit Ports Managed 10 Port Industrial Ethernet Switch Your choice – Just connect to the RJ45 for a for fast redundant ring or mesh networks 10 PORT INDUSTRIAL ETHERNET MANAGED SWITCH 10/100/1000Mbps auto-detecting copper link or plug in 10The PORT INDUSTRIAL ETHERNET MANAGED SWITCH network management SLX-10MG SNMPv1 is a 10 and portv2industrial Ethernet managed SLX-10MG-1 REAL-TIME SECURE PERFORMANCE n n a fiber transceiver for a 100 or 1000Mbps noise-immune n SNMPv3 authentication & encryption for security switch with 7 fast and 3 Gigabit The ports of which two arefiber link. These advanced ports give you the flexibility SLX-10MG is a 10 port industrial Ethernet managed n SNMP notifications (traps) for report on event you need and make your job easier! combination ports that support both copper and The SLX-10MG is a 10 port industrialswitch Ethernet with 7managed fast and fiber 3 Gigabit ports of which two are n Priority Queuing (QoS/CoS) for real-time operation optic connections. This switch is designed to be rugged, combination switch with 7 fast and 3 Gigabit ports of whichports two that are support both copper and fiber n IGMP for Multicast filtering (snooping & querying) optic connections. This DIN switch is designed to be rugged, reliable, real-time andsupport secure.both It combines compact combination ports that copper and fiber n VLAN for convenient traffic segregation reliable, real-time software and secure. It combines compact DIN rail packaging, protected circuitry and powerful optic connections.n This switch is designed to be rugged, Broadcast & multicast storm protection protected circuitry and powerful software rail packaging, to keep your and system going even keep under thesystem toughest reliable, real-time secure. It combines compact DINgoing even under the toughest yourdiagnostics n RMON & port mirroringto for advanced rail conditions. packaging, protected circuitry and powerful software conditions. n Security with HTTPS, SSL, SSH, SNMPv3 & more to keep your system going even under the CLI toughest n Easy configuration via Web, PRODUCT Telnet or HIGHLIGHTS PRODUCT HIGHLIGHTS conditions. n Free field-installable firmware upgrades forever n 10 ports including n 10 ports including TROUBLE FREE OPERATION p 7 fast Ethernet 10/100 RJ45 ports PRODUCT HIGHLIGHTS p 7 fast Ethernet 10/100 RJ45 ports n -40 to +75 °C operating range p 1 Gigabit Ethernet 10/100/1000 RJ45 port n 10 ports including n UL/CSA p 1 Gigabit (CUL), CE and Hazloc (Zone 2) ratedSWITCH Ethernet 10/100/1000 RJ45 port 10 PORT INDUSTRIAL ETHERNET MANAGED SLX-10MG-1 p p 7 fast Ethernet (PENDING) 10/100 RJ45 ports 2 Gigabit combo ports for copper or fiber p 2 Gigabit combo ports for copper or fiber n High port count in a small footprint n Dual (redundant) power inputs p 1PERFORMANCE Gigabit Ethernet 10/100/1000 RJ45 port ETHERNET STANDARDS COMPLIANCE n Truly rugged design with -40 to 75°C operation n High port insurge a small footprint n count Industrial and spike protection n n Electrical safety – UL508 / CSA C22.2/14; EN61010-1, CE 10 pEthernet ports including 3 Gigabit 2 Gigabit combo ports for coppern or fiber n Self-test/alarm output contact Easy to configure management functions n Truly rugged design with -40 to 75°C operation n Managed, n EMC – FCC part 15, ICES-003; EN61000-6-4, EN61000-6-2, CE store & forward, wire-speed n DIN n High port count direct footprint panel mounting Fast Redundancy with Rapid Spanning Tree inrail a orsmall REAL-TIME SECURE PERFORMANCE n All IEEE n Hazardous locations – UL1604 / CSA C22.2/213 (Class I, Div. 2); 802.3toEthernet protocols supported n Easy configure management functions or Real-Time-RingTM Flexible Combination Gigabit Ports n Real-Time-Ring™ or Rapid Spanning Tree (RSTP) EN60079-15 (Zone 2, Two Category 3), CE (ATEX) n n RJ45 ports 1 - 7 (shielded) Truly rugged design10/100BaseTX with -40 to 75°C operation SECURE PERFORMANCE Your choice – Justperconnect to the RJ45 for a n networks n REAL-TIME Maritime – designed for marine and offshore ABS forNETWORKING fast redundant ring or mesh SOLUTIONS YOUR INDUSTRIAL CHALLENGES WWW.SIXNET.COM RJ45 ports 8 - 10 (shielded)FOR 10/100/1000BaseTX n Easy to configure management functions 10/100/1000Mbps auto-detecting copper link or plug in n n RJ45 RoHS and WEEE compliant port speed auto-negotiation Two Flexible Combination Gigabit Ports n Real-Time-Ring™ or Rapid Spanning n SNMPv1 Tree and(RSTP) v2 network management a company fiber transceiver for a 100 or 1000Mbps noise-immune n ISO9001:2000 certified n RJ45 MDI/MDIX auto-crossover REAL-TIME SECURE PERFORMANCE Your choice – Just connect to the RJ45 for a for fast redundant ring or meshn networks SNMPv3 authentication & encryption for security fiber link. These advanced ports give you the flexibility n RJ45 TD and RD auto-polarity PHYSICAL copper linkjoboreasier! plug in Two10/100/1000Mbps Flexible n Real-Time-Ring™ or Rapid Spanning Treenotifications (RSTP) (traps) n SNMP for report onCombination event auto-detecting youGigabit need andPorts make your n 9SNMPv1 v2 network management n Ports and 10 areand combination gigabit ports that have both a RJ45 nchoice DIN rail–or direct panel mounting a fiber transceiver for a 100 or 1000Mbps noise-immune Your Just connect to the RJ45 for a for fast redundant ring or mesh networks n Priority Queuing (QoS/CoS) for real-time operation connector and SFPauthentication fiber connector. For each of thesefor ports, only one n SNMPv3 & encryption security n Case – Corrosion-resistant aluminum fiber link. These advanced ports give you the flexibility 10/100/1000Mbps auto-detecting copper link or plug in of the connectors can be used at a time. n IGMP for Multicast filtering (snooping & querying) n SNMPv1 and v2 network management n Ingress protection – IP40 n SFPn(pluggable) SNMP notifications (traps) for report on event a fiber for a 100 1000Mbps ports 9 - 10 accept mini-GBIC transceivers yountransceiver need and make yourorjob easier! noise-immune n VLAN for convenient traffic segregation Weight – 0.34 kg (12 oz.) SNMPv3 n n Fiber optic portauthentication speed: 100 Mbps&orencryption 1000 Mbps for security fiber link. These advanced ports give you the flexibility n Priority Queuing (QoS/CoS) for real-time operation Dimensions – see mechanical diagram n & multicast storm nprotection n Fiber typical specs (see separate datasheet forBroadcast n SNMP notifications (traps) for report details) on event you need and make your job easier! n IGMP for n µm filtering (snooping RMON&&querying) port mirroring for advanced diagnostics p Multimode, 0.55Multicast km, 850 nm, 50-62.5/125 MECHANICAL DRAWING 4.30" Queuing (QoS/CoS) for real-time operation np Priority Singlemode, 10 km, 1310 nm, 9-10/125 µm n Security with HTTPS, SSL, SSH, SNMPv3 & more n VLAN for convenient traffic segregation [10.92 cm] np IGMP Long haul, up to 120+ km, 1550 (snooping nm, 9-10/125 for Multicast filtering &µm querying) n Easy configuration via Web, Telnet or CLI n Broadcast & on multicast storm protection n Typical latency (varies load & settings) n Free field-installable firmware upgradesSnaps to forever for convenient traffic segregation np VLAN @ 10 Mbps: 16 us + frame time n RMON & port mirroring for advanced diagnostics standard Removable TROUBLE FREE OPERATION np Broadcast @ 100 Mbps:&5multicast us + framestorm time protection DIN Rail Screw Block Security with HTTPS, SSL, SSH, SNMPv3 & more n Full n n or half duplex operation configurable per port -40 to +75 °C operating range EN50022 n RMON & port mirroring for advanced diagnostics n MAC (352)mm) supported 8192 n addresses n UL/CSA Easy configuration via Web, Telnet or CLI (CUL), CE and Hazloc (Zone rated n n Memory bandwidth 32 Gbps SSL, SSH, SNMPv3 Security with HTTPS, & more (PENDING) n Free field-installable firmware upgrades forever n Ethernet isolation 1500 VRMS 1 minute 5.52" 6.02" n or Dual n Easy configuration via Web, Telnet CLI(redundant) power inputs Removable DIN n TROUBLE Console ports FREE – USB and RS232 (RJ45) OPERATION [14.02 cm] [15.29 cm] clip for direct n Industrial surge and spike protection n Free field-installable firmware upgrades forever ETHERNET COMPLIANCE panel mounting n -40 to +75 °C operating range n Self-test/alarm output contact n IEEE 802.3z (Gigabit 1000 Mbps Ethernet connections) TROUBLE FREE OPERATION n UL/CSA (CUL), CE and Hazloc n (Zone 2) rated rail or direct panel mounting Fast Redundancy with Rapid Spanning Tree n IEEE 802.3u (Fast Ethernet 100Mbps for newerDIN devices) n -40 to +75 °C operating range or Real-Time-RingTM (PENDING) Panel mounting ears n IEEE 802.3 (10Mbps Ethernet supports legacy devices) accept up to n n UL/CSA (CUL), CE and (Zone 2) rated IEEE with Flow Hazloc Control) n 802.3x Dual (Full-Duplex (redundant) power inputs SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM a #12 screw n IEEE 802.1D/w (Rapid Spanning Tree for redundant rings and (PENDING) n Industrial surge and spike protection Spanning Tree for interoperability) 1.63" 4.69" Dual (redundant) power– inputs n n [4.13 cm] IEEE (Priority Queuing CoS, ToS/DS) n 802.1p Self-test/alarm outputQoS, contact [11.92 cm] n n IEEE 802.1Q (VLAN traffic segregation) Industrial surgeforand spike protection SeeRedundancy the User Manual a More DetailedTree Diagram n DIN rail or direct panel mounting Fast withfor Rapid Spanning REAL-TIME-RING™ n Self-test/alarm output contact TM All specifications are subject to change. Consult factory for latest info. or Real-Time-Ring n Link loss recovery: 30 mS plus 5 mS per hop n DIN rail or direct panel mounting ORDERING GUIDE Fast Redundancy with Rapid Spanning Tree n Switches in a ring: <50 for best performance SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES TM WWW.SIXNET.COM n Multiple rings supported (configurable) SLX-10MG-1 or Real-Time-Ring 10 port industrial Ethernet switch “OK” ALARM OUTPUT GMFIBER-SFP-500 SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES Indicates power & operational status GMFIBER-SFP-2K n n n Voltage same as switch input voltage Maximum current output 0.5 Amp POWER INPUT n n n Redundant input terminals Reverse polarity protection Gigabit SFPWWW.SIXNET.COM fiber transceiver, mm, 550 m Gigabit SFP fiber transceiver, mm, 2 km GSFIBER-SFP-10K Gigabit SFP fiber transceiver, sm, 10 km GSFIBER-SFP-30K Gigabit SFP fiber transceiver, sm, 30 km GSFIBER-SFP-50K Gigabit SFP fiber transceiver, sm, 50 km n 10 Ethernet ports including 3 Gigabit safety – with UL508 / CSA n Electrical Input power (typical all ports active)C22.2/14; EN61010-1, CE GSFIB n EMC – FCC part 15, ICES-003; EN61000-6-4, EN61000-6-2, CE Managed, store & forward, wire-speed p 5 W (w/ no fiber plugged in) n All IEEE 802.3 Ethernet protocols supported n Hazardous locations – UL1604 / CSA C22.2/213 (Class I, Div. 2); p 7 W (w/ 2 fiber plugged in) FMFIB n RJ45 ports 1 - 7 (shielded) 10/100BaseTX EN60079-15 (Zone 2, Category 3), CE (ATEX) n Power input voltage 10-30 VDC n Maritime – designed for marine and offshore per ABS n RJ45 ports 8 - 10 (shielded) 10/100/1000BaseTX FSFIB n Transient protection 15,000 watts peak n RoHS n RJ45 port speed auto-negotiation and WEEE compliant n Spike protection 5,000 watts (10x for 10 uS) FSFIB n ISO9001:2000 n RJ45 MDI/MDIX auto-crossover certified company ETHERNET PERFORMANCE STANDARDS COMPLIANCE ENVIRONMENTAL n RJ45 TD and RD auto-polarity PHYSICAL FSFIB n 10 Ethernet n ports 9including 3 Gigabit safety temperature: – UL508 / CSA C22.2/14; EN61010-1, CE Ports and 10 are combination gigabit ports that have both a RJ45 n Electrical n DIN Operating n rail or direct panel mounting connector and SFP fiber connector. For each of these ports, only one ET-PSn Managed, store & forward, wire-speed n EMC FCC part EN61000-6-4, p –Case n -40–to 7515, °C ICES-003; (cold startup at -40 °C) EN61000-6-2, CE Corrosion-resistant aluminum of the connectors can besupported used at a time. n All IEEE 802.3 n Hazardous Ethernet protocols locations – UL1604 / CSA C22.2/213 (Class I, Div. 2); n Ingress n SP-ETH – IP40 Storageprotection temperature -40 to +85 °C n SFP (pluggable) ports 9 - 10 accept mini-GBIC transceivers n RJ45 ports 1 EN60079-15 (Zone 2, - 7 (shielded) 10/100BaseTX n n Weight – 0.34 kgCategory (12 oz.) 3),5CE Humidity (non-condensing) to (ATEX) 95% RH (optional conformal coating n Fiber optic port speed: 100 Mbps or 1000 Mbps n Maritime n RJ45 ports 8 - 10 (shielded) 10/100/1000BaseTX – designed for mechanical marine anddiagram offshore per ABS n Dimensions – see is available) RJ45-D n Fiber typical specs (see separate datasheet for details) n RoHS n RJ45 port speed auto-negotiation WEEEand compliant n and Vibration shock – IEC60068-2-6, -27 p Multimode, 0.55 km, 850 nm, 50-62.5/125 µm MECHANICAL DRAWING n ISO9001:2000 certified company n RJ45 MDI/MDIX auto-crossover 4.30" NOTE: p Singlemode, 10 km, 1310 nm, 9-10/125 µm [10.92 cm] n RJ45 TD and RD auto-polarity PHYSICAL p PERFORMANCE Long haul, up to 120+ km, 1550 nm, 9-10/125 µm ETHERNET STANDARDS COMPLIANCE n Ports 9 nandTypical 10 arelatency combination that have both a RJ45 SIXNET Technology Park (varies gigabit on load ports & settings) n DIN rail or direct panel mounting n 10 Ethernet ports including 3 Gigabit n Electrical safety – UL508 / CSA C22.2/14; EN61010-1, CE Snaps to connector SFP connector. For each 331 Ushers Road • Ballston Lake, NY 12019 • USA p and @ 10fiber Mbps: 16 us + frame time of these ports, only one n Case – Corrosion-resistant aluminum n connectors n EMC –standard Managed, store & forward, FCC part 15, ICES-003; EN61000-6-4, EN61000-6-2, CE • sales@sixne Removable of the canMbps: be used at+awire-speed time. time • 1.518.877.5173 Fax 1.518.877.8346 p @ 100 5 us frame n Ingress protection DIN Rail –locations IP40 Block n (pluggable) n Hazardous All IEEE 802.3 Ethernet protocols supported –Screw UL1604 / CSA C22.2/213 (Class I, Div. 2); n SFP 9 10 accept mini-GBIC transceivers n Full orports half duplex operation configurable per port n Weight – 0.34EN50022 kg (12 oz.)YOUR SOLUTIONS FOR INDUSTRIAL NETWORKING CHALLENGE n optic EN60079-15 (Zone 2, Category 3), CE (ATEX) RJ45 ports 1 - 7100 (shielded) 10/100BaseTX n Fiber speed: Mbps or 1000 n port (35 mm) MAC addresses supported 8192Mbps n Dimensions – see mechanical n n Maritime – designed fordiagram marine and offshore per ABS RJ45 ports 8 10 (shielded) 10/100/1000BaseTX n Fiber typical specs (see separate datasheet for details) n Memory bandwidth 32 Gbps n RoHS and WEEE compliant RJ45 port speed p n n Ethernet Multimode, 0.55 km, auto-negotiation 850 1500 nm, 50-62.5/125 µm isolation VRMS 1 minute MECHANICAL DRAWING 4.30" 5.52" 6.02" Removable DINcompany n ISO9001:2000 n certified RJ45 MDI/MDIX auto-crossover p Singlemode, n Console 10 ports km, 1310 nm, 9-10/125 µm – USB and RS232 (RJ45) [14.02 cm] [15.29 cm] [10.92 cm] clip for direct RJ45 TDupand RD auto-polarity p nLong PHYSICAL haul, to 120+ km, 1550 nm, 9-10/125 µm ETHERNET COMPLIANCE panel mounting n n SLX-10MG-1 Managed Industrial Ethernet Switch Specifications 10 PORT INDUSTRIAL ETHERNET MANAGED SWITCH SLX-10MG-1 10 PORT INDUSTRIAL ETHERNET MANAGED SWITCH SLX-10MG-1 n Ports 9 and 10 areload combination gigabit ports that have both a RJ45 Typical latency (varies settings) n DIN rail or direct panel mounting n IEEE 802.3zon (Gigabit&1000 Mbps Ethernet connections) Snaps to connector and SFP fibertime connector. For each of these ports, only one p @ 10 Mbps: 16 us + frame n Case n IEEE 802.3u (Fast Ethernet 100Mbps for newer devices) – Corrosion-resistant aluminum standard Removable of the connectors can be used at a time. p @ 100 5 us +(10Mbps frame time Panel mounting ears n Mbps: n Ingress IEEE 802.3 Ethernet supports legacy devices) DIN Railprotection – IP40 Block Screw n SFP (pluggable) ports 9 - 10 accept mini-GBIC transceivers accept up to n Full or half operation configurable per port n duplex EN50022 IEEE 802.3x (Full-Duplex with Flow Control) n Weight – 0.34 kg (12 oz.) n Fiber optic port speed: 100 Mbps or 1000 Mbps a #12 screw n MAC addresses (35 mm) – see n IEEE supported 802.1D/w 8192 (Rapid Spanning Tree for redundant rings and n Dimensions mechanical diagram n Fiber typical specs (see separate datasheet for details) Spanning32 Tree for interoperability) n Memory bandwidth 1.63" Gbps 4.69" pn Multimode, 0.55 km, 850 nm, 50-62.5/125 µm MECHANICAL DRAWING [4.13 cm] IEEE 802.1p (Priority1Queuing n Ethernet isolation 1500 VRMS minute – QoS, CoS, ToS/DS) [11.924.30" cm] 5.52" 6.02" p Singlemode, Removable DIN 10 km, 1310 nm,segregation) 9-10/125 µm IEEE 802.1Q (VLAN for(RJ45) traffic n Consolenports – USB and RS232 [10.92 cm] [14.02 cm] [15.29 cm] See the User Manual for a More Detailed Diagram clip for direct REAL-TIME-RING™ p Long haul, up to 120+ km, 1550 nm, 9-10/125 µm ETHERNET COMPLIANCE panel mounting All specifications are subject to change. Consult factory for latest info. n Typical latency (varies on load & settings) n Link loss recovery: 30 mS plus 5 mS per hop Snaps to n IEEE (Gigabit 1000us Mbps Ethernet connections) 802.3z p 10 Mbps: + frame timeperformance ORDERING GUIDE n @ Switches in a16 ring: <50 for best standard Removable n IEEE 802.3u (Fast Ethernet 100Mbps for newer devices) pn @ 100 Mbps: 5 us + frame time DIN Rail Multiple rings supported (configurable) SLX-10MG-1 10ears port industrial Screw BlockEthernet switch Panel mounting n IEEE (10Mbps Ethernet supports legacy devices) n 802.3 Full or half duplex operation configurable per port EN50022 “OK” ALARM OUTPUT accept upGigabit to n IEEE GMFIBER-SFP-500 SFP fiber transceiver, mm, 550 m 802.3x (Full-Duplex with Flow Control) n MAC addresses supported 8192 (35 mm) a #12 screw n Indicates power & operational status n IEEE (Rapid Spanning n 802.1D/w Memory bandwidth 32 Gbps Tree for redundant rings and GMFIBER-SFP-2K Gigabit SFP fiber transceiver, mm, 2 km n Tree Voltage same as switch input voltage Spanning for interoperability) 1.63" n Ethernet isolation 1500 VRMS 1 minute 4.69" 5.52" 6.02"sm, 10 km n Maximum current output 0.5 Amp GSFIBER-SFP-10K Gigabit n IEEE 802.1p Removable DINSFP fiber transceiver, [4.13 cm] (Priority – QoS, CoS, ToS/DS) n Console ports –Queuing USB and RS232 (RJ45) [11.92 cm] [14.02 cm] [15.29 cm] clip for direct n IEEEPOWER 802.1Q INPUT (VLAN for traffic segregation) GSFIBER-SFP-30K Gigabit fiber transceiver, sm, 30 km ETHERNET COMPLIANCE See the User Manual for aSFP More Detailed Diagram panel mounting n Redundant input terminals REAL-TIME-RING™ n IEEE All specifications are subject to change. Consult factory for latest info. 802.3z (Gigabit 1000 Mbps Ethernet connections) GSFIBER-SFP-50K Gigabit SFP fiber transceiver, sm, 50 km n Reverse polarity protection n Link loss recovery: 30 mS plus 5 mS per hop n IEEE 802.3u (Fast Ethernet for newer devices) n Input power (typical with all100Mbps ports active) ORDERING GUIDE GSFIBER-SFP-80K Gigabit SFP fiber transceiver, sm, 80 km n Switches in a ring: <50 for best performance Panel mounting ears n IEEE supports legacy devices) p802.3 5 W (10Mbps (w/ no fiberEthernet plugged in) n Multiple rings supported (configurable) accept up to SLX-10MG-1 10 port industrial Ethernet switch n IEEE p802.3x (Full-Duplex within)Flow Control) FMFIBER-SFP-4K 100Mb SFP fiber transceiver, mm, 4 km 7 W (w/ 2 fiber plugged a #12 screw “OK” ALARM OUTPUT n Power n IEEE input voltage 10-30 VDC 802.1D/w (Rapid Spanning Tree for redundant rings and GMFIBER-SFP-500 Gigabit SFPSFP fiberfiber transceiver, mm, m FSFIBER-SFP-30K 100Mb transceiver, sm,550 30 km n Transient Spanning for interoperability) protection 15,000 1.63" n Indicates power &Tree operational statuswatts peak 4.69" GMFIBER-SFP-2K Gigabit SFP fiber transceiver, mm, 2 km n Spike n IEEE 5,000 watts (10x for 10CoS, uS) ToS/DS) [4.13 cm] 802.1p (Priority Queuing – QoS, FSFIBER-SFP-60K [11.92 100Mb n Voltage same as protection switch input voltage cm] SFP fiber transceiver, sm, 60 km nENVIRONMENTAL IEEE 802.1Q (VLAN traffic segregation) n Maximum current output 0.5for Amp n GSFIBER-SFP-10K Gigabit SFPSFP fiber sm, 10 km km See the User Manual for fiber atransceiver, More Detailed Diagram FSFIBER-SFP-100 100Mb transceiver, sm, 100 REAL-TIME-RING™ POWER INPUTn Operating temperature: All specificationsGigabit are subject tofiber change. Consult factory forkm latest info. ET-PS-024-02 Power –transceiver, AC to 24VDC, 2A 30 GSFIBER-SFP-30K SFPsupply sm, p -40 to 75 °C (cold startup at -40 °C) n Link loss terminals recovery: 30 mS plus 5 mS per hop n Redundant input n Storage temperature -40 to +85 °C SP-ETH-2 Dual port Ethernet surge & lightning protector ORDERING GUIDE n Switches in a ring: <50 for best performance GSFIBER-SFP-50K Gigabit SFP fiber transceiver, sm, 50 km n Reverse polarity protection for the 10/100 ports only n Humidity (non-condensing) 5 to 95% RH (optional conformal coating n Multiple rings supported (configurable) SLX-10MG-1 10 port industrial Ethernet switch n Input power (typical with all ports active) is available) RJ45-DB9F-CBL GSFIBER-SFP-80K Console DB9 to RJ45 Gigabit SFP port fibercable, transceiver, sm, 80 km “OK” p 5 ALARM W n(w/ Vibration no OUTPUT fiber plugged in) – IEC60068-2-6, -27 and shock GMFIBER-SFP-500 Gigabit SFP fiber transceiver, mm, 550 m p n7 WIndicates NOTE: Contact SIXNET for special long transceiver, haul transceivers up to 120 Km. FMFIBER-SFP-4K 100Mb SFPorfiber mm, 4 km (w/ 2 fiberpower plugged in) & operational status GMFIBER-SFP-2K Gigabit SFP fiber transceiver, mm, 2 km n Power voltage 10-30 VDC input voltage n input Voltage same as switch FSFIBER-SFP-30K 100Mb SFP fiber transceiver, sm, 30 km n Transient SIXNET protection 15,000output watts peak n Maximum current 0.5 Amp Technology Park Gigabit SFP fiber transceiver, sm, 10 km •GSFIBER-SFP-10K 331 Ushers Road • Ballston Lake, NY 12019 USA n Spike protection 5,000 watts (10x for 10 uS) Datasheet FSFIBER-SFP-60K 100Mb SFP fiber transceiver, sm, 60 SLX-10MG-1 km POWER INPUT Rev JUN2011 1.518.877.5173 • Fax 1.518.877.8346 • [email protected] GSFIBER-SFP-30K Gigabit SFP fiber transceiver, sm, 30 km ENVIRONMENTAL n Redundant input terminals FSFIBER-SFP-100 100Mb SFP fiber transceiver, sm, 100 km SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM n Operating temperature: GSFIBER-SFP-50K Gigabit SFP fiber transceiver, sm, 50 km n Reverse polarity protection ET-PS-024-02 Power supply – AC to 24VDC, 2A p -40 75 °C (cold(typical startupwith at -40 °C) active) n toInput power all ports GSFIBER-SFP-80K Gigabit SFPsurge fiber&transceiver, sm, 80 km n Storage SP-ETH-2 Dual port Ethernet lightning protector +85 °Cin) p temperature 5 W (w/ no -40 fibertoplugged for the 10/100 ports only n Humidity 5 to 95% p (non-condensing) FMFIBER-SFP-4K 100Mb SFP fiber transceiver, mm, 4 km 7 W (w/ 2 fiber plugged in) RH (optional conformal coating is available) n Power input voltage 10-30 VDC RJ45-DB9F-CBL Console port cable, DB9 to RJ45 FSFIBER-SFP-30K 100Mb SFP fiber transceiver, sm, 30 km n Vibration and shock – IEC60068-2-6, -27 n Transient protection 15,000 watts peak NOTE: Contact SIXNET for special or long haul transceivers up to 120 Km. n Spike protection 5,000 watts (10x for 10 uS) FSFIBER-SFP-60K 100Mb SFP fiber transceiver, sm, 60 km ENVIRONMENTAL Americas As the global experts in communication, monitoring and control for industrial automation and networking, Red Lion has been delivering SIXNET Technology Park [email protected] FSFIBER-SFP-100 100Mb SFP fiber transceiver, sm, 100 km n Operating temperature: Our SLX-10MG-1 award-winning 331 Ushers Road • Ballston Lake, NY 12019 • USAinnovative solutions for over forty years.Datasheet ET-PS-024-02 Power supply – AC to 24VDC, 2A p -40 to 75 °C (cold startup at -40 °C) • FaxAsia-Pacific technology enables companies worldwide to gainRevreal-time data JUN2011 1.518.877.5173 1.518.877.8346 • [email protected] [email protected] n Storage temperature -40 to +85 °C SP-ETH-2 Dual port Product Ethernet surge & lightning visibility that drives productivity. brands includeprotector Red Lion, SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES the 10/100WWW.SIXNET.COM portsinonly n Humidity (non-condensing) 5 to 95% RH (optional conformal coating N-Tron and Sixnet. Withforheadquarters York, Pennsylvania, the Europe is available) company has offices across the port Americas, Asia-Pacific RJ45-DB9F-CBL Console cable, DB9 to RJ45 and Europe. Middle East n Vibration and shock – IEC60068-2-6, -27 For more information, please visit www.redlion.net. Red Lion is a Africa NOTE: Contact SIXNET for special or long haul transceivers up to 120 Km. w w w. re d l i o n . n e t Spectris company. [email protected] Connect. Monitor. Control. SIXNET Technology ADLD0205 072514 © 2014 Red Lion Controls Park +1 (717) 767-6511 331 Ushers Road • Ballston Lake, NY 12019 • USA 1.518.877.5173 • Fax 1.518.877.8346 • [email protected] Datasheet SLX-10MG-1 Rev JUN2011