PRODUCT DATASHEET SLX-8MG-1 ALL-GIGABIT INDUSTRIAL ETHERNET MANAGED SWITCH The SLX-8MG-1 is an 8 port “all-Gigabit” industrial Ethernet managed switch that is designed to be rugged, reliable, real-time and secure. It combines compact DIN rail packaging, protected circuitry and powerful software to keep your system going even in the toughest conditions. PRODUCT HIGHLIGHTS 8 Gigabit ports for 10/100/1000 Ethernet links 4 advanced combination ports accept copper RJ45 or noise-immune f ber optic links up to 80+ km Fully managed w/ advanced features and security Flexible mounting on DIN rail or direct to panel Truly rugged design for -40 to +75°C operation REAL-TIME SECURE PERFORMANCE Rapid Spanning Tree (RSTP) and Real-T imeRingTM for fast redundant rings SNMPv1 and v2 network management SNMPv3 authentication & encryption for security SNMP notif cations (traps) for report on event Priority Queuing (QoS/CoS) for real-time operation IGMP for Multicast f ltering (snooping & querying) VLAN for convenient traff c segregation Broadcast & multicast storm protection RMON & port mirroring for advanced diagnostics Security with HTTPS, SSL, SSH, SNMPv3 & more Easy configuration via Web, Telnet or CLI Free f eld-installable f rmware upgrades forever TROUBLE FREE OPERATION UL/CSA (CUL), CE, Hazardous Locations (Zone 2) and Maritime rated Wide temperature -40 to +75 °C operation – no fans! Dual (redundant) power inputs with spike protection Self-test and alarm output contact Rugged corrosion-resistant metal packaging DIN rail or direct panel mounting in multiple positions SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM ALL-GIGABIT INDUSTRIAL ETHERNET MANAGED SWITCH SPECIFICATIONS ETHERNET PERFORMANCE 8 Ethernet ports (all Gigabit) Ethernet switch type managed Store and forward wire speed switching Ethernet protocols supported by all IEEE 802.3 RJ45 ports (shielded) 10/100/1000BaseTX RJ45 speed (10, 100 or 1000) auto-negotiation RJ45 MDI/MDIX auto-crossover RJ45 TD and RD polarity auto-polarity Ethernet isolation 1500 VRMS 1 minute Four ports are combination gigabit ports that have both a RJ45 connector and SFP f ber connector. For each of these ports, only one of the connectors can be used at a time. SFP (pluggable) ports accepts mini-GBIC transceivers Fiber optic port speed 1000Base or 100Base depending on transceiver populated Fiber optic port wavelength for typical gigabit transceivers 850 nm (mm), 1310 nm (sm) or 1550 nm (long haul sm) center Fiber multimode (mm) typical 50 or 62.5/125 um (LC typical) Fiber singlemode (sm) typical 9 or 10 /125 um (LC typical) Fiber typ. distance (full duplex) 0.55-1.1 km (mm); 10+ km (sm); up to 70+ km (long haul sm) See separate f ber transceiver datasheet for more details Typical latency <5 us plus frame time; varies on load and settings Full or half duplex operation conf gurable per port MAC addresses supported 8192 Memory bandwidth 32 Gbps Console ports RS232 (RJ45) and USB ETHERNET COMPLIANCE IEEE 802.3ab/z (Gigabit 1000 Mbps Ethernet links) IEEE 802.3u (Fast Ethernet 100Mbps for newer devices) IEEE 802.3 (10Mbps Ethernet supports legacy devices) IEEE 802.3x (Full-Duplex with Flow Control) IEEE 802.1D/w (Rapid Spanning Tree for redundant rings and Spanning Tree for interoperability) IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS) IEEE 802.1Q (VLAN for traff c segregation) MECHANICAL DRAWING 3.80" [9.65 cm] 4.70" [11.94 cm] Removable Snaps to Screw Block standard DIN Rail SFP Fiber EN50022 Ports (35 mm) Removable DIN clip for direct panel mounting Panel mounting ears accept up to a #6 screw on earlier models and up to a #12 screw on newer models. 4.19" [10.65 cm] 5.20" [13.21 cm] Console Ports 2.75" [6.99 cm] See the User Manual for a More Detailed Diagram SLX-8MG-1 POWER INPUT Redundant input terminals Input power (typical with all ports linked and active) 12 W (8-ports without f ber) 15 W (8-ports with 4 f ber) Input voltage (all models) 10-30 VDC Transient protection 15,000 watts peak Spike protection 5,000 watts (10 times for 10 uS) ”OK” OUTPUT Indicates power and operational status Voltage same as switch input voltage Maximum current output 0.5 Amp ENVIRONMENTAL Operating temperature range -40 to +75 °C (cold startup at -40°C) Storage temperature range -40 to +85 °C Humidity (non-condensing) 5 to 95% RH (Conformal coating optional) Vibration and shock IEC60068-2-6, -27, -32 STANDARDS COMPLIANCE Electrical safety UL508/CSA C22.2/14: EN61010-1, CE EMC emissions and immunity FCC part 15, ICES-003; EN61000-6-4, EN61000-6-2, CE Hazardous locations: UL1604, CSA C22.2/213 (Class 1, Div. 2), EN60079-15 (Zone 2, Category 3), CE (ATEX) Marine and offshore rated per ABS PHYSICAL Corrosion-resistant aluminum with IP30 protection Din rail mounting or direct to panel (2 ways) Dimensions - see mechanical drawing Weight 12 oz. (0.34 kg) All specif cations are subject to change. Consult factory for latest info. ORDERING GUIDE SLX-8MG-1 8 RJ45 with 4 SFP slots GMFIBER-SFP-500 Gigabit SFP f ber transceiver, mm, 550 m GMFIBER-SFP-2K Gigabit SFP f ber transceiver, mm, 2 km GSFIBER-SFP-10K Gigabit SFP f ber transceiver, sm, 10 km GSFIBER-SFP-30K Gigabit SFP f ber transceiver, sm, 30 km GSFIBER-SFP-50K Gigabit SFP f ber transceiver, sm, 50 km GSFIBER-SFP-80K Gigabit SFP f ber transceiver, sm, 80 km FMFIBER-SFP-4K 100Mb SFP f ber transceiver, mm, 4 km FSFIBER-SFP-30K 100Mb SFP f ber transceiver, sm, 30 km FSFIBER-SFP-60K 100Mb SFP f ber transceiver, sm, 60 km FSFIBER-SFP-100 100Mb SFP f ber transceiver, sm, 100 km Note: Special (such as Bi-Di) or extra long haul (up to 120 km) are available special order. 331 Ushers Road • Ballston Lake, NY 12019 • USA +1.518.877.5173 • Fax +1.518.877.8346 • [email protected] SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES Datasheet SLX-8MG-1 Rev: 27 Aug, 2009 WWW.SIXNET.COM