1N4740A SERIES_J15 - Taiwan Semiconductor

1N4740A - 1M200Z
Taiwan Semiconductor
CREAT BY ART
1W, 10V - 200V Glass Passivated Junction Silicon Zener Diodes
FEATURES
- Glass passivated chip junction
- Low profile package
- Built-in strain relief
- Low inductance
- Typical IR less than 5μA above 11V
- Compliant to RoHS Directive 2011/65/EU and
in accordance to WEEE 2002/96/EC
- Halogen-free according to IEC 61249-2-21 definition
MECHANICAL DATA
Case: DO-204AL (DO-41)
DO-204AL (DO-41)
Molding compound, UL flammability classification rating 94V-0
Part No. with suffix "H" means AEC-Q101 qualified
Packing code with suffix "G" means green compound (halogen-free)
Terminal: Pure tin plated leads, solderable per JESD22-B102
Meet JESD 201 class 2 whisker test
Weight: 0.3g (approximately)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERSTICS (TA=25°C unless otherwise noted)
SYMBOL
VALUE
UNIT
Peak power dissipation at TA=50°C,
Derate above 50°C (Note 1)
PD
1.0
6.67
Watts
mW/°C
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
IFSM
10
A
TJ
- 55 to +150
°C
TSTG
- 55 to +150
°C
PARAMETER
Operating junction temperature range
Storage temperature range
Note 1: Mounted on Cu-Pad size 5mm x 5mm on PCB
ORDERING INFORMATION
PART NO.
PART NO.
PACKING CODE
PACKING CODE
SUFFIX
1N47xxA
1MxxxZ
(Note 1)
PACKING
DO-41
3000 / Ammo box (26mm taping)
DO-41
5000 / 13" Paper reel
DO-41
5000 / 13" Paper reel (Reverse)
DO-41
1000 / Bulk packing
SUFFIX
A0
H
PACKAGE
R0
G
R1
B0
Note 1: "xx" defines voltage from 10V (1N4740A) to 200V (1M200Z)
EXAMPLE
PREFERRED
PART NO.
1N4740AHA0G
PART NO.
1N4740A
Document Number: DS_D1409040
PART NO.
SUFFIX
H
PACKING CODE
A0
PACKING CODE
SUFFIX
G
DESCRIPTION
AEC-Q101 qualified
Green compound
Version: L15
1N4740A - 1M200Z
Taiwan Semiconductor
CREAT BY ART
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted)
Zener Voltage
Test
Current
[email protected]
IZT
[email protected]
V
mA
Ω
Device
(Note 1)
Zener Impedance
Leakage Current
Surge current
[email protected]
IR
[email protected]
Ω
mA
μA
V
mA
Min.
Nom.
(Note 2)
(Note 3)
Max.
1N4740A
9.50
10
10.50
25.0
7
700
0.25
10
7.6
454
1N4741A
10.45
11
11.55
23.0
8
700
0.25
5
8.4
414
1N4742A
11.40
12
12.60
21.0
9
700
0.25
5
9.1
380
1N4743A
12.35
13
13.65
19.0
10
700
0.25
5
9.9
344
1N4744A
14.25
15
15.75
17.0
14
700
0.25
5
11.4
304
1N4745A
15.20
16
16.80
15.5
16
700
0.25
5
12.2
285
1N4746A
17.10
18
18.90
14.0
20
750
0.25
5
13.7
250
1N4747A
19.00
20
21.00
12.5
22
750
0.25
5
15.2
225
1N4748A
20.90
22
23.10
11.5
23
750
0.25
5
16.7
205
1N4749A
22.80
24
25.20
10.5
25
750
0.25
5
18.2
190
1N4750A
25.65
27
28.35
9.5
35
750
0.25
5
20.6
170
1N4751A
28.50
30
31.50
8.5
40
1000
0.25
5
22.8
150
1N4752A
31.35
33
34.65
7.5
45
1000
0.25
5
25.1
135
1N4753A
34.20
36
37.80
7.0
50
1000
0.25
5
27.4
125
1N4754A
37.05
39
40.95
6.5
60
1000
0.25
5
29.7
115
1N4755A
40.85
43
45.15
6.0
70
1500
0.25
5
32.7
110
1N4756A
44.65
47
49.35
5.5
80
1500
0.25
5
35.8
95
1N4757A
48.45
51
53.55
5.0
95
1500
0.25
5
38.8
90
1N4758A
53.20
56
58.80
4.5
110
2000
0.25
5
42.6
80
1N4759A
58.90
62
65.10
4.0
125
2000
0.25
5
47.1
70
1N4760A
64.60
68
71.40
3.7
150
2000
0.25
5
51.7
65
1N4761A
71.25
75
78.75
3.3
175
2000
0.25
5
56.0
60
1N4762A
77.90
82
86.10
3.0
200
3000
0.25
5
62.2
55
1N4763A
86.45
91
95.55
2.8
250
3000
0.25
5
69.2
50
1N4764A
95.00
100
105.00
2.5
350
3000
0.25
5
76.0
45
1M110Z
104.50
110
115.50
2.3
450
4000
0.25
5
83.6
-
1M120Z
114.00
120
126.00
2.0
550
4500
0.25
5
91.2
-
1M130Z
123.50
130
136.50
1.9
700
5000
0.25
5
98.8
-
1M150Z
142.50
150
157.50
1.7
1000
6000
0.25
5
114.0
-
1M160Z
152.00
160
168.00
1.6
1100
6500
0.25
5
121.6
-
1M180Z
171.00
180
189.00
1.4
1200
7000
0.25
5
136.8
-
1M200Z
190.00
200
210.00
1.2
1500
8000
0.25
5
152.0
-
Max.
Notes:
1. Tolerance and Type Number Designation. The type numbers losted have a standard tolerance on the nominal zener voltage of ±5%
2. Specials Available Include:
A. Nominal zener voltages between the voltages shown and tighter voltage tolerances
B. Matched sets
3. Zener Voltage (Vz) Measurement. Guarantees the zener voltage when messured at 90 seconds while maintaining the lead
temperature(TL) at 30°C±1°C, from the diode body
4. Zener Impedance (Zz) Derivation. The zener impedance is derives from the 60 cycle AC voltage, which results when an accurrent
having and rms value equal to 10% of the DC zener current (IZT or IZK) is superimposed on IZT or IZK.
5. Surge Current (IR) Non-Repetitive. The rating listd in the electrical chatacteristics table is maximum peak, non-repetitive, reverse
surge current of 1/2 square wave or equivalent sine wave pulse of 1/120 second duration superimposed on the test current, IZT per
JEDEC registration; however, actual device capability is as described in Figure 11.
Document Number: DS_D1409040
Version: L15
1N4740A - 1M200Z
Taiwan Semiconductor
CREAT BY ART
RATINGS AND CHARACTERISTICS CURVES
(TA=25°C unless otherwise noted)
FIG. 2 TYPICAL FORWARD CHARACTERISTICS
FIG. 1 POWER TEMPERATURE DERATING CURVE
1000
1.25
1
IF, FORWARD CURRENT (mA)
PD, MAXIMUM POWER DISSIPATION
(WATTS)
MINIMUM
MAXIMUM
0.75
0.5
0.25
100
70°C
25°C
0°C
0
0
25
50
75
100
125
1
150
0.4
AMBIENT TEMPERATURE(oC)
0.6
0.7
0.8
1
1.1
FIG.5 TYPICAL LEAKAGE CURRENT
10000
TYPICAL LEAKAGE CURRENT
AT 80% OF NOMINAL
BREAKDOWN VOLTAGE
47V
100
0.9
VF, FORWARD VOLTAGE (V)
Iz(rms)=0.1 Iz(dc)
f=1KHz
1000
27V
10
100
0.8V
1
0
1
10
100
Iz, ZENER CURRENT (mA)
FIG.4 EFFECT OF ZENER VOLTAGE
ON ZENER IMPEDANCE
1000
Iz = 1mA
Iz(rms)=0.1 Iz(dc)
f=1KHz
IR, LEAKAGE CURRENT(μA)
Zz, DYNAMIC IMPEDANCE (Ω)
0.5
FIG.3 EFFECT OF ZENER CURRENT
ON ZENER IMPEDANCE
1000
Zz, DYNAMIC IMPEDANCE (Ω)
150°C
10
10
1
0.1
100
125°C
5 mA
20mA
0.01
10
25°C
0.001
3
1
1
10
100
4
5
6
7
8
9
10
11
12
13
14
15
Vz, NOMINAL ZENER VOLTAGE(V)
Iz, ZENER CURRENT(mA)
Document Number: DS_D1409040
Version: L15
1N4740A - 1M200Z
Taiwan Semiconductor
CREAT BY ART
FIG. 7 TEMPERATURE COEFFICIENTS
FIG.6 TYPICAL CAPACITANCE versus Vz
12
1000
a-RANGE FOR UNITS TO 12 VOLTS
θVz, TEMPERATURE COEFFICIENT
(mV/oC)
C, CAPACITANCE(pF)
10
0V BIAS
100
1.0V BIAS
50% OF BREAKDOWN
10
1
10
100
8
6
4
2
RANGE Vz@ IZT
0
-2
-4
2
3
4
Vz, FORWARD VOLTAGE (V)
6
7
8
9
10
11
12
Vz, ZENER VOLTAGE(V)
FIG. 9 EFFECT OF ZENER CURRENT
FIG.8 TEMPERATURE COEFFICIENTS
6
100
Vz@ IZT
b-RANGE FOR UNITS 12 TO 100 VOLTS
10
θVz, TEMPERATURE COEFFICIENT
(mV/℃)
θVz, TEMPERATURE COEFFICIENT
(mV/oC)
5
RANGE Vz@ IZT
1
10
100
Vz, ZENER VOLTAGE(V)
4
0.01mA
1 mA
2
20mA
0
-2
NOTE:BELOW 3 VOLTAGE ABOVE a
VOLTS CHANGES IN ZENER CURRENT
NOT AFFECT TEMPERATURE COEFFICIENTS
-4
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
Vz, ZENER VOLTAGE(V)
FIG. 10 TYPICAL THERMAL RESISTANCE
versus LEAD LENGTH
ΘJL, JUNCTION TO LEAD THERMAL
RESISTANCE(oC/W)
175
150
125
100
75
50
25
0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
L, LEAD LENGTH TO HEAT SINK(INCHES)
Document Number: DS_D1409040
Version: L15
1N4740A - 1M200Z
Taiwan Semiconductor
CREAT BY ART
FIG.11 MAXIMUM SURGE POWER
PPK, PEAK SURGE POWER WATTS
100
5% DUTY CYCLE
11V-91V NON-REPETITIVE
RECTANGULAR WAVEFORM
PRIOR TO INITIAL PULSE
0.8V-10V NON-REPETITIVE
10
10% DUTY CYCLE
20% DUTY CYCLE
1
0
0
1
10
100
1000
PW, PULSE WIDTH (ms)
Document Number: DS_D1409040
Version: L15
1N4740A - 1M200Z
Taiwan Semiconductor
CREAT BY ART
PACKAGE OUTLINE DIMENSIONS
DO-204AL (DO-41)
DIM.
Unit (mm)
Unit (inch)
Min
Max
Min
Max
A
2.00
2.70
0.079
0.106
B
0.71
0.86
0.028
0.034
C
25.40
-
1.000
-
D
4.20
5.20
0.165
0.205
E
25.40
-
1.000
-
MARKING DIAGRAM
P/N =
Specific Device Code
G=
Green Compound
YWW =
Date Code
F=
Factory Code
Document Number: DS_D1409040
Version: L15
1N4740A - 1M200Z
Taiwan Semiconductor
CREAT BY ART
Notice
Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf,
assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, to
any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of
sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty,
relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose,
merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify TSC for any damages resulting from such improper use or sale.
Document Number: DS_D1409040
Version: L15