driven by Low side driver (8 channel) features ÿ 8 high current outputs (RON typ. 1.5 Ý / Imax=350mA) ÿ Thermal overload protection ÿ Serial structure for direct µC interfacing ÿ Supply voltage range 5.5V to 25.5V ÿ ÿ ÿ ÿ ÿ Output open- and short-circuit detection Low standby current (typical < 1µA) Cascadable – 40°C to + 125°C operating temperature SO20w package, QFN package coming soon application ÿ Relays ÿ Steppermotors, unipolar ÿ Lamps / LEDs E910.01 LIN transceiver E910.43 features ÿ Supply voltage range (VS) 6V to 18V ÿ LIN 2.0 compatible interface for data rates up to 20kBaud ÿ Short circuit current limitation ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ Output slewrate control to reduce EMI Over temperature protection Bus-line DC voltage range – 24V to + 30V Receiver debounce filter Very low active current consumption Very low standby current (typ. < 10 µA) Wake up output by LIN-Bus transition and EN, battery power on – 40°C to + 125°C operating temperature SO 8n package application ÿ Bus interface for Local Interconnect Network (LIN) E910.43 LIN tranceiver & watchdog & voltage regulator features ÿ Operating voltage range (VS) 3V to 27V ÿ ÿ ÿ Two selectable output voltages: 5V and 3.3V ±2.0% Output current 150mA Reset impulse durations (10ms, 100ms) and threshold levels are programmable ÿ Selectable watchdog windows: ÿ LIN-bus interface, LIN specification 2.0 ÿ Input voltage bus ranges from – 36V to + 40V ÿ ÿ ÿ ÿ ÿ ÿ Fixed: 37ms or 75ms / Variable: 3ms to 50ms Output slew rate control to reduce EMI Wake up via bus Standby current <30µA typical Over temperature and output current protection – 40°C to + 125°C operating temperature SO16 package application ÿ Bus interface for Local Interconnect Network (LIN) communication including µC supervisory E910.48 E910.48 HALIOS® optical switch features ÿ Supply voltage range VDD 3V to 5.5V ÿ Proximity, touch and switch function ÿ ÿ Operational up to 200kLux ambient light Parameter adjustment and functional data read back via SPI ÿ – 40°C to + 85°C operating temperature ÿ ÿ Status output for switch and proximity function TSSOP16 / SO16w package application ÿ Waterproof switches ÿ Switch with background lighting ÿ ÿ ÿ Switch for antiseptic environment function in case of proximity detection Mechanic-less key pad arrays Human Machine Interface (HMI) E909.01 E909.01 Step down converter features ÿ More than 90% efficiency and 100% duty cycle ÿ Supply voltage range 5V to 40V ÿ Wide, adjustable output voltage 0V to (VIN – 0.5V) ÿ On-chip 1.6A peak P-channel MOS power switch ÿ 12μA typical shutdown current ÿ Less than 0.5V drop voltage at 500mA output current ÿ 0.2V or 1.22V selectable internal reference ÿ Controllable VOUT via an external reference ÿ Improved current-limited PFM converter ÿ Maximum operating frequency > 300kHz ÿ Power good, reset or watchdog signal ÿ Under-voltage lockout and thermal shut down ÿ -40°C to +125°C junction temperature ÿ TSSOP-24 exposed pad package application ÿ ÿ Sequenceable POL power supply systems Automotive electronics ÿ Minimum component step-down converter ÿ Externally controllable LED power supply E910.27 E910.27 PIR light controller features ÿ On chip bridge rectifier and supply regulator ÿ Temperature compensation input ÿ Digital signal processing ÿ Low power consumption ÿ Adjustable soft on/off switching (fading) ÿ Light mode: Increase lamp brightness from set brightness to full brightness on movement. to set brightness on movement. ÿ Inductive load switching ÿ Light mode: Increase lamp brightness from off ÿ Dimmer function ÿ Four quadrant TRIAC driver ÿ Suitable for 115V/60Hz and 230V/50Hz applications ÿ SO20w package application ÿ Outdoor and indoor motion (detection sensor lights) ÿ High end lighting switches ÿ Energy saving ÿ Automatic bedroom night lights E910.84 E910.84 Stepper motor driver features ÿ ÿ ÿ H-bridge drivers, with stall detection On-chip over temperature protection Ubat measurement ÿ 8 Bit µC (2 kByte EEPROM, 64 Byte RAM, 3 Byte EEPROM) ÿ 4 MHz On-Chip oscillator with LIN bus synchronisation ÿ ÿ ÿ ÿ 8 Bit ADC, 20 kHz PWM-Unit LIN transceiver, LIN controller LIN autoaddressable (BSM-algorithm) Min. external components ÿ Supply voltage range 8V to 18V ÿ SO16w package E910.79 ÿ ÿ – 40°C to + 85°C operating temperature ROM version on demand application ÿ ÿ ÿ Steppermotors, bipolar HVAC-systems (flap-motors, actuators & sensors) Low-cost LIN-slave (actors & sensors) DC PWM motor control features ÿ ÿ Speed regulation using the ripple signal of motor current Overlap free PWM actuation for external power MOS half bridge ÿ Internal charge pump for 100% actuation ÿ Integrated watchdog E910.94 ÿ ÿ ÿ ÿ ÿ ÿ Conditioning of motor current for external µC and ADC Over voltage and temperature shutdown Low standby current typ. 40µA Supply voltage range 7V to 16V – 40°C to + 125°C operating temperature SO24w package application ÿ ÿ Fan regulator Fuel and hydraulic pumps regulator Pulse count driver E910.71 features ÿ Servo control positioning of actuators ÿ 6 half bridges configurable to drive 3, 4, or 5 DC-motors ÿ Output current max. 400 mA per half bridge ÿ ÿ ÿ Excellent positioning performance Three independent pulse detectors and counters SPI for communication with µC ÿ Short circuit- and over temperature protection ÿ Diagnostic data via SPI ÿ Battery supply and 5V monitor ÿ Supply voltage range 6V to 18V ÿ ÿ – 40°C to + 85°C operating temperature QFN 7*7 32 package application ÿ ÿ Positioning of HVAC flaps (according to US patent 5,203,499 owned by BHTC) Positioning of DC-motors EC-motor control E910.69 features ÿ Gate drives circuit for three external NMOS half bridges (B6 bridge) ÿ 3.3V compatible inputs ÿ Adjustable precision short circuit turn off over shunt resistors ÿ ÿ ÿ ÿ ÿ ÿ ÿ Internal charge pump to generate the supply voltage driver Programmable slew rate control Bootstrap under voltage detection and shutdown Emergency shutdown of all transistors by a separate pin nToff Supply voltage range 8V to 60V – 40°C to + 125°C operating temperature QFN 9x9 64 package application ÿ ÿ Brushless DC-motor control DC-motor full and half bridge control DC-motor driver (8 half bridges) E910.63 features ÿ 8 half bridges - 500mA,each ÿ Serial structure for direct µC drive ÿ Cascadable ÿ Reverse readable ÿ Short-circuit current supervision/limitation ÿ Thermal overload-protection ÿ Reverse voltage-capability up to 16V ÿ Edge-clipping on < 200 mV/µs ÿ Supply voltage range 6V to 18V ÿ ÿ – 40°C to + 85°C operating temperature SO28w package, QFN package coming soon application ÿ DC-motors ÿ Relays ÿ ÿ Steppermotors, unipolar, bipolar Lamps ÿ Control of current distribution of 1 or 2 in parallel power-FETs depending current limitation ÿ ÿ ÿ ÿ Limitation of power dissipation by voltage Overvoltage shut down Externally adjustable minimum current Externally adjustable over temperature protection featuring load current reduction ÿ Diagnosis function (option) E910.16 features Linear fan controller ÿ ÿ Turn on the power-FETs during load-dump Low standby current (power down mode) ÿ Supply voltage range 7.2V to 17.5V ÿ ÿ – 40°C to + 125°C operating temperature SO16w package application ÿ Fan regulator ELMOS Semiconductor AG – Headquarters Heinrich-Hertz-Str. 1 | 44227 Dortmund | Germany Phone + 49 (0) 231 - 75 49 - 0 | Fax + 49 (0) 231 - 75 49 - 149 [email protected] | www.elmos.de Your local partner