SHEET 1 OF 1 n19.00 [.748 in] n22.00 [.866 in] SWITCH FUNCTION POS. 1 POS. 2 n15.50 [.610 in] RING ILLUMINATION n13.25 [.522 in] C 18.45 `.15 [.726 `.006 in] ON (ON) 1-3 1-2 (ON) = MOMENTARY PANEL CUTOUT MAX. PANEL THICKNESS: 11.0 [.43in] STAINLESS STEEL ACTUATOR LASER ETCHED M01 MARKING NON-ILLUMINATED POWER SYMBOL n6.00 B [.236 in] 2.00 [.079 in] FLAT ACTUATOR 3 1 1 STAINLESS STEEL BODY GRN 2 SEE NOTE 15 FOR HARDWARE (-) (+) SPDT CONTACT CONFIGURATION 28.5 [1.12 in] 37.0 [1.46 in] NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT MATERIAL: SILVER 5. RATING: 2A 24VDC 6. ELECTRIC LIFE: 50,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000 MΩ MIN. 8. DIELECTRIC STRENGTH: 2,000 VAC MIN. FOR 1 MINUTE 9. CONTACT RESISTANCE: 50mΩ MAX. @ 1A 12VDC 10. OPERATING TEMP.: -20°C to 55°C 11. TRAVEL: 2.8mm 12. DENOTES CRITICAL PARAMETER. 13. LAMP VOLTAGE: 2.8V @ 20mA 14. INGRESS PROTECTION: IP65 15. HARDWARE SUPPLIED: O-RING AND HEXNUT 16. ILLUMINATION COLOR: GREEN 1 - 1 + 3 + 2.80 [.110 in] .50 [.020 in] .50 [.020 in] 2.80 [.110 in] 2.50 [.098 in] 12.00 [.472 in] 10.00 [.394 in] 18.15 `.15 [.715 `.006 in] ACROSS FLAT C C 21350 CHANGE FLAT SIZE ON BODY AND CUTOUT 1/13/14 EBP B 21333 CORRECT POWER SYMBOL DIAMETER 12/30/13 EBP A 21261 RELEASE FOR PRODUCTION 10/8/13 EBP REV PCR NO DATE BY DESCRIPTION M19 X 1.0 THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE SCALE PV4F2B0SS-331-M01 DATE 10/8/2013 DR EBP DWG 52-PV4F2B0SS331M01 REV C