SHEET 1 OF 1 22.00 .10 [.866 .004 in] 22.00 .10 [.866 .004 in] 10.50 .10 [.413 .004 in] 18.00 [.709 in] 25.00 [.984 in] RING ILLUMINATION: WHITE OPTIONAL PANEL CUTOUT MAX. PANEL THICKNESS 12mm RECOMMENDED PANEL CUTOUT MAX. PANEL THICKNESS 12mm 11.00 [.433 in] 13.80 [.543 in] M03 MARKING (POWER SYMBOL) LASER ETCHED (NON ILLUMINATED) SWITCH FUNCTION 1 3 (-) 2 POS. 1 AUTUATOR: STAINLESS STEEL FLAT ACTUATOR POS. 2 4 10.30 .10 [.406 .004 in] (+) SPDT CONTACT CONFIGURATION 1-2 ON 3-4 OFF 1-2 OFF 3-4 ON M22x1.0 22.2 [.874 in] 30.70 1.00 [1.209 .039 in] 41.00 1.00 NOTE: [1.614 .039 in] 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X = 0.4 X.XX = 0.25 3. TERMINAL NOS. FOR REF. ONLY 4. FUNCTION: SPDT 5. RATING: 2A @ 48VDC 6. ILLUMINATION VOLTAGE: 2.8V 20mA 7. CONTACT RESISTANCE: 50m MAX. @ 1A 12VDC 8. INSULATION RESISTANCE: 1,000M @ 500VDC 9. DIELECTRIC STRENGTH: 2,000VAC MIN. FOR 1 MINUTE 10. ELECTRICAL LIFE: 50,000 CYCLES 11. OPERATING TEMPERATURE: -20 C TO 55 C 12. INGRESS PROTECTION: IP65 13. DENOTES CRITICAL PARAMETER 14. 2002/95/EC (ROHS) COMPLIANT 15. ILLUMINATION COLOR: WHITE (FORWARD), WHITE (REVERSE) 16. HARDWARE INCLUDED: HEX NUT AND O-RING (NOT SHOWN) A 21868 REV PCR NO BODY: STAINLESS STEEL 2.00 [.079 in] RELEASE FOR PRODUCTION DESCRIPTION 6/10/15 MW DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED FLAT (+) 4 3 1 (+) 2 4 .50 [.020 in] 7.00 [.276 in] SCALE 2.80 [.110 in] 6.00 [.236 in] 13.60 [.535 in] TITLE (-) 2 PV7F2T0SS-301-M03 1:1 DATE 6/10/2015 DR MW DWG 52-PV7F2T0SS301M03 REV A