SHEET 1 OF 1 n16.00 [.630 in] n18.00 [.709 in] SWITCH FUNCTION POS. 1 POS. 2 RING ILLUMINATION n11.90 [.469 in] PANEL CUTOUT MAX. PANEL THICKNESS 10.0mm [.315 in] OFF (ON) OPEN 1-2 n9.20 [.362 in] (ON) = MOMENTARY FLAT ACTUATOR MACHINE FINISH STAINLESS STEEL (304 GRADE) 1 2 - + 1.50 [.059 in] CIRCUIT: SPST NOTE: 16.50 `.50 1. ALL DIMENSIONS IN MM [INCH] [.650 `.020 in] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT MATERIAL: GOLD OVER SILVER PLATED COPPER (AgCdO) 5. RATING: 0.4VA MAX. @ 20V (AC OR DC) MAX. 6. ELECTRIC LIFE: 200,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000 MΩ MIN. 8. DIELECTRIC STRENGTH: 2,000 VAC MIN. FOR 1 MINUTE 9. CONTACT RESISTANCE: 50mΩ MAX. @ 1A 12VDC 10. OPERATING TEMP.: -20°C to 55°C 11. TRAVEL: 1.8mm 12. DENOTES CRITICAL PARAMETER. 9.80 13. ILLLUMINATION VOLTAGE: BASE VOLTAGE, 20mA 2.8V [.386 in] 14. ILLUMINATION COLOR: RED (FORWARD), GREEN (REVERSE) 15. HARDWARE SUPPLIED: O-RING AND HEXNUT (NOT SHOWN) A 20315 REV PCR NO BODY FINISH MACHINE FINISH STAINLESS STEEL (304 GRADE) RELEASE FOR PRODUCTION DESCRIPTION 11/30/11 BGL DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE SCALE NOTE 15 HARDWARE SUPPLIED 15.50 [.610 in] 2 (-) 20.00 `.50 [.787 `.020 in] M16x1.0 (-) 1 1 (+) 2.00 [.079 in] .50 [.020 in] 8.40 [.331 in] PV6F240SSG-3G1 2:1 DATE 11/30/2011 DR BGL DWG 52-PV6F240SSG3G1 REV A