9104 SERIES/HIGH VOLTAGE SIP REED RELAYS

9104 SERIES/HIGH VOLTAGE SIP REED RELAYS
9104 Series Hi Voltage SIP Reed Relays
Molded SIP relays are the industry standard when high reliability and consistent
performance are desired in a compact package. The 9104 Series adds high voltage
switching capability and high voltage standoff capability to a SIP relay package. These
high voltage, high performance relays are ideally suited for Automatic Test Equipment,
Instrumentation, and Process Control applications where voltage isolation is a key
design requirement.
9104 Series Features
u High voltage switching up to 1000 V
u High dielectric strength (2000 V DC)
u High Insulation Resistance – 1011Ω minimum
u High reliability, hermetically sealed contacts for long life
u High speed switching compared to electromechanical relays
u Molded thermoset body on integral lead frame design
u Optional Coil Suppression Diode – protects coil drive circuits
u Magnetic Shield – reduces interaction
u UL File #E67117 - Contact factory for details
u RoHS compliant
DIMENSIONS
in Inches (Millimeters)
TOP VIEW
PIN #1
.103 Typ.
(2.6)
.120
(3.0)
.154 Typ.
(3.9)
.950 Max.
(24.13)
.245 Max.
(6.22)
.020 Typ.
.(.51)
3
1
.300
(7.62)
5
.200
(5.08)
.320 Max.
(8.13)
7
.018 Typ.
(.46)
.300
(7.62)
.125 ± .005
(3.17 ± .13 )
.010 Typ.
(.25)
Ordering Information
Part Number
Model Number
9104
9XXX-XX-1X
Coil Voltage
05=5 volts 12=12 volts
General Options
0=No Diode
1=Diode2
Magnetic Shield
1=External Magnetic Shield
07082013
tel: (401) 943.2686
|
fax: (401) 942.0920
MODEL NUMBER
Parameters
COIL SPECS.
91042
Test Conditions
Units
4 Pin SIP
Nom. Coil Voltage
VDC
5 12
Max. Coil Voltage
VDC
6.5 15.0
+/- 10%, 25° C
Ω
175 500
Operate Voltage
Must Operate by
VDC - Max.
3.75 9.0
Release Voltage
Must Release by
VDC - Min.
0.5 1.0
Coil Resistance
CONTACT RATINGS
Switching Voltage3
Max DC/Peak AC Resist.
Volts
1000
Switching Current
Max DC/Peak AC Resist.
Amps
0.5
Carry Current
Max DC/Peak AC Resist.
Amps
1.3
Contact Rating
Max DC/Peak AC Resist.
Watts
10
Life Expectancy-Typical1
Signal Level 1.0V, 10mA
x 106 Ops.
300
Static Contact
Resistance (max. init.)
50mV, 10mA
Ω
0.150
Dynamic Contact
Resistance (max. init.)
0.5V, 50mA
at 100 Hz, 1.5 msec
Ω
0.200
Insulation Resistance
(minimum)
Between all Isolated Pins
at 100V, 25°C, 40% RH
Ω
1011
Capacitance - Typical
Across Open Contacts
No Shield
pF
1.0
Open Contact to Coil
No Shield
pF
-
Dielectric Strength
(minimum)
Between Contacts
Contacts to Coil
Contacts/Shield to Coil
VDC/peak AC
VDC/peak AC
VDC/peak AC
2000
3000
3000
Operate Time including bounce - Typical
At Nominal Coil Voltage,
30 Hz Square Wave
msec.
0.75
msec.
0.5
RELAY SPECIFICATIONS
Release Time - Typical
Top View:
Dot stamped on top of relay refers to pin #1 location
Grid = .1”x.1” (2.54mm x 2.54mm)
1
3
5
7
Notes:
Consult factory for life expectancy at other switching loads.
Optional diode is connected to pin #3(+) and pin #5(-). Correct coil polarity must be observed.
3
Switch current limited to 1.0mA @ 1000V.
1
2
Environmental Ratings:
Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C; Solder Temp: 270°C max; 10 sec. max
All electrical parameters measured at 25°C unless otherwise specified.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
For most recent data visit www.cotorelay.com
COTO TECHNOLOGY, INC.
07082013