9094 HIGH POWER MINIATURE SIP REED RELAYS 9094 Series High Power Miniature Molded SIP Reed Relays The 9094 Series is the high power 20W version of Coto Technology’s industry standard 9091 MiniSIP relay. The robust contacts and small size of the 9094 series make it ideal for ATE and other high-reliability test and measurement applications where high board density and long life are key requirements. 9094 Series Features u 9094 is a 20W SIP relay measuring .600” x .150” x .275” u 40% less board space (LxW) than the 9001 series u Optional coil suppression diode protects coil drive circuits u High insulation resistance, 1012Ω minimum u Molded thermoset body on integral lead frame design u High reliability, hermetically sealed contacts for long life u RoHS compliant DIMENSIONS in Inches (Millimeters) .615 Max. (15.62) .020 (0.5) .020 Ref. (0.51) .150 Max. (3.81) .125 (3.18) .150 Typ. (3.81) .275 Max. (6.98) .010 (0.25) .140 (3.56) Ordering Information Part Number 9094-XX-0X Model Number General Options2 9094 0=No Diode 1=Diode Coil Voltage 05=5 volts 12=12 volts 07082013 tel: (401) 943.2686 | fax: (401) 942.0920 MODEL NUMBER Parameters 90942 Test Conditions Units (20 Watt) 1 Form A SIP COIL SPECS. Nom. Coil Voltage VDC Max. Coil Voltage 5 12 VDC 6.5 15.0 +/- 10%, 25° C Ω 125 500 Operate Voltage Must Operate by VDC - Max. 3.75 9.0 Release Voltage Must Release by VDC - Min. 0.4 1.0 Max DC/Peak AC Resist. Volts 200 Switching Current Max DC/Peak AC Resist. Amps 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.5 Max DC/Peak AC Resist. Watts 20 Coil Resistance CONTACT RATINGS Switching Voltage Contact Rating Signal Level 1.0V, 10mA x 10 Ops. 500 Static Contact Resistance (max. init.) 50mV, 10mA Ω 0.125 Dynamic Contact Resistance (max. init.) 0.5V, 50mA at 100 Hz, 1.5 msec Ω 0.150 Between all Isolated Pins at 100V, 25°C, 40% RH Ω 1012 Capacitance - Typical Across Open Contacts pF 0.1 Open Contact to Coil pF 2.0 Between Contacts Contacts to Coil VDC/peak AC VDC/peak AC 200 1500 At Nominal Coil Voltage, 30 Hz Square Wave msec. 0.5 msec. 0.30 Life Expectancy-Typical 1 6 RELAY SPECIFICATIONS Insulation Resistance (minimum) Dielectric Strength (minimum) Operate Time including bounce - Typical Release Time - Typical Top View: Dot stamped on top of relay refers to pin #1 location Grid = .1”x.1” (2.54mm x 2.54mm) 1 2 3 4 Notes: 1 2 Consult factory for life expectancy at other switching loads. Resistance >0.5Ω defines end of life or failure to open. Optional diode is connected to pin #2 (+) and pin #3(-). Correct coil polarity must be observed. Environmental Ratings: Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C; Solder Temp: 270°C max; 10 sec. max All electrical parameters measured at 25°C unless otherwise specified. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s 07082013 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.