CX93040/CX20548 CSPM92/34/32 SPI Modem ImagingSmart™ Product Brief SPI Controller-Based Modem with Fourth Generation SmartDAA® for Embedded Applications Product Overview The CX93040 modem paired with the CX20548 SmartDAA® 4 LSD, is well suited to embedded applications such as POS terminals, STBs, video recorders, meters, security systems, remote site management, and other applications that require robust dial-up connectivity. Integrating a microcontroller, DSP, memory, and a SmartDAA interface onto a single die, the CX93040 is easily adaptable for just about any application, and is completely independent of the host processor and operating system. In addition, the SmartDAA interface hooks directly to Conexant's field-proven, marketleading fourth-generation silicon DAA, supporting the lowest component LSD and permitting a single-cost, optimized SKU that is capable of meeting and exceeding global PTT standards. Setting the CX93040 apart is the addition of an SPI interface, which allows for maximum flexibility in the main processor. Found in virtually every SoC and/or main processor, SPI is a shared bus working in a master/slave configuration and requires only one set of I/Os for all peripherals that attach to the SPI bus. This is in stark contrast to a UART port for an RS232 serial bus, which requires a set of dedicated I/Os for each peripheral. Using an SPI bus allows the CX93040 to eliminate a UART port on the SoC and its associated pins that would have otherwise been dedicated for the modem. The CX93040 controller-based SPI modem device set is available in the smallest footprint and environmentally friendly, RoHS/green-compliant packages that consist of a CX93040 SPI interface modem device in a 6mmx6mm 20-pin QFN package, and the CX20548 SmartDAA 4 LSD in a 4mmx4mm 16-pin QFN package. Applications • • • • • • POS terminals STBs Security systems Remote site management Meters Videophone terminals Key Features • • • • • • • • SPI Interface Controller-based modem—No external memory required Up to V.92 Robust and field-proven CID support Support for POS-specific fast connect protocols SmartDAA support Optional serial NVRAM interface Reference design that supports 6kV System Block Diagram DAA Hardware The CX93040 is offered in V.32bis, V.34, and V.92 versions. Furthermore, the CX93040 leverages three generations of firmware expertise and know-how that, coupled with Conexant’s market-leading and fieldproven DAA and full reference design kits, makes this modem the easiest, most mature and robust modem in which to design. Conexant Confidential • www.conexant.com • 026PBR00 CX93040 Modem CX93040-1x Modem 20-Pin QFN SPI Bus Interface 28.224 MHz Crystal or Clock Source Telephone Line DTE/Host Interface RAM ROM CX20548 SmartDAA 4 Line Side Device (LSD) 16-Pin QFN Digital Isolation Barrier (DIB) MCU/DSP SmartDAA Interface Optional NVRAM Line Side DIB Interface (LSDI) Codec Telephone Line Interface External Discrete Components TIP RING CX93040/CX20548 CSPM92/34/32 SPI Modem | ImagingSmart™ Product Brief Additional Features • • • • • • • • • • Modulations and protocols – ITU-T V.92 = Quick connect, modem-on-hold, and PCM upstream – V.90/V.34/V.32bis/V.32 – V.22bis/V.22/V.23/V.21 – V.23 reverse and half-duplex – Bell 212A/103 – V.29 FastPOS and V22 Fast Connect – SIA protocol and contact ID for alarm equipment – V.80 synchronous access mode – V.17/V.29 fax class 1/1.0 and fax class 2 V.44/V.42bis/MNP5 data compression V.42/MNP2-4 Error correction Call waiting detection for selected countries Hardware and software flow control and speed buffering 63 embedded and upgradeable country profiles Optional serial NVRAM interface for country profile storage and code upgrades Full-duplex 8-bit/16-bit PCM voice pass-through mode 28.224MHz Xtal or clock input Worldwide operation – • • Complies to TBR21 and other country requirements – Type I caller ID decoding – Type II caller ID snooping – Call progress, blacklisting – Meets worldwide DC mask requirements Low power and voltage – Single 3.3V supply – Low-power consumption mode – 3.3V I/O level Compact, robust board design – Reference design files provided for quick time-to-market – Reference design tested for PTT and TBR21 approvals – Small, low-profile modem packages – Reference design supports 6kV isolation Benefits • • • • • • Uses an I/O that is shared with other SPI peripherals—Alleviates the need for the host to support a traditional serial interface OS independent and minimal host intervention Robust dial-up connectivity Allows worldwide support with a single design Allows additional country profile storage and code upgrades Quick time-to-market and low system cost SmartDAA Features • • • • • • • Extension pick-up detection Digital line protection Line reversal detection Remote hang-up detection Worldwide compliance CX20548 SmartDAA 4 LSD in a 16-pin QFN Worldwide support with a single design www.conexant.com Headquarters: 1901 Main Street, Suite 300 Irvine, CA,92614 General Information: U.S. and Canada: 888-855-4562 | International: 1 + 949-483-3000 © 2014 Conexant Systems, Inc. All rights reserved. 026PBR00