eBOX738 Series Quick Installation Guide(v.A1) Another CD-ROM contains the User’s Manual of the CPU card installed in your eBOX738 system. If you encounter any difficulties, please consult your dealer for assistance. I. Checklist 9 Power Cord x 1 (For AC power supply only) 9 Wall-Mount Kit x 1 (Option) 9 Ebox738 series Quick Installation Guide 9 Screw kit x 1 Do not attempt to apply power to the system if there is damage to any of its components. 9 Ebox738-FL system unit x 1 9 SBC83810 Driver & Utilities CD x 1 9 K/B Mouse PS2 Y cablet x 1 II. Working Precautions 1. Always disconnect the unit from the power outlet whenever you are working inside the chassis. 2. If possible, wear a grounded wrist strap when you are working inside the computer chassis. Alternatively, discharge any static electricity by touching the bare metal chassis of the unit , or the bare metal body of any other grounded appliance. 3. Hold electronic circuit boards (such as the SBC83810 board) by the edges only. Do not touch the components on the board unless it is necessary to do so. Do not flex or stress the circuit board. 4. Use correct screws and do not over tighten screws. 5. Keep the original packaging and static-protective bag in case the unit has to be returned. ©Copyright 2005 AXIOMTEK Co., Ltd. Version A1 March 2005 Printed in Taiwan 94160738000L 1 eBOX738 Series Quick Installation Guide(v.A1) Step 1 Open/close the chassis cover by fasten/loose 8 screws on the top of the chassis. Step 2 Firmly insert a DDR DIMM module into the socket. 2 ©Copyright 2005 AXIOMTEK Co., Ltd. Version A1 March 2005 Printed in Taiwan 94160738000L Components in the eBOX738 Series are very fragile and sensitive. Should you replace or return any component for repair, consult an authorized technician to dismantle it. III. Installing/Unstalling Memory eBOX738 Series Quick Installation Guide(v.A1) Another CD-ROM contains the User’s Manual of the CPU card installed in your eBOX738 system. If you encounter any difficulties, please consult your dealer for assistance. IV. Installing/Unstalling Compact Flash Card Step 1 Fasten/Loosen the indicated four screws. ©Copyright 2005 AXIOMTEK Co., Ltd. Version A1 March 2005 Printed in Taiwan 94160738000L 3 eBOX738 Series Quick Installation Guide(v.A1) V. Installing/Unstalling Wall Mount Kit Step 1 Fasten/Loosen the indicated four screws. VI. Installing/Unstalling HDD Step 1 Open/close the chassis cover by fasten/loose 4 screws on the bottom of the chassis. 4 ©Copyright 2005 AXIOMTEK Co., Ltd. Version A1 March 2005 Printed in Taiwan 94160738000L Components in the eBOX738 Series are very fragile and sensitive. Should you replace or return any component for repair, consult an authorized technician to dismantle it. Step 2 Insert/remove a compact flash card into the socket. eBOX738 Series Quick Installation Guide(v.A1) Another CD-ROM contains the User’s Manual of the CPU card installed in your eBOX738 system. If you encounter any difficulties, please consult your dealer for assistance. Step 2 Fasten/Loosen the indicated four screws on the HDD bracket. ©Copyright 2005 AXIOMTEK Co., Ltd. Version A1 March 2005 Printed in Taiwan 94160738000L 5 eBOX738 Series Quick Installation Guide(v.A1) Step 4 Plug/unplug the IDE cable as the the indicated to the hard disk. 6 ©Copyright 2005 AXIOMTEK Co., Ltd. Version A1 March 2005 Printed in Taiwan 94160738000L Components in the eBOX738 Series are very fragile and sensitive. Should you replace or return any component for repair, consult an authorized technician to dismantle it. Step 3 Fasten/Loosen the HDD on the HDD bracket by the indicated four screws.