SBC81872 Series Quick Installation Guide Checklist 9 SBC81872 Pentium ® M SBC All-in- One Board x 1 9 Quick Installation Guide x 1 9 Product Information CD-ROM x 1 9 3.5” FDD cable x 1 9 3.5” Ultra DMA66 HDD cable x 1 9 2-pin mini jumper caps x 8 9 CPU Cooler x 1 9 PS/2 Keyboard/Mouse adapter x1 9 COM, Printer extension cables with bracket x1 9 SATA cable X2 9 SATA power cable x2 If there are damaged or missing parts, contact your supplier and/or dealer immediately. Do not attempt to apply power to the board if there is damage to any of its components. ©Copyright 2000 AXIOMTEK Co., Ltd. Version A1 June 2005 Printed in Taiwan 1 The complete version of the User’s Manual, along with the drivers/utilities software programs are in the Product Information CD of the SBC81872 Series CPU Card Kit. I. SBC81872 Series Quick Installation Guide II. Jumper Settings The complete version of the User’s Manual, along with the drivers/utilities software programs are in the Product Information CD of the SBC81872 Series CPU Card Kit. Jumper JP1 Definiens LCD voltage selection Jumper setting Short 1-2 : 5V, Short 2-3 : 3.3V (Default) JP2 Reserved JP3 Reserved JP4 Reserved JP5 Reserved JP6 Reserved JP7 Reserved JP8 Clear CMOS Short 1-2 : Normal (Default) JP9 FSB selection Short 1-3, 2-4 : Auto for Dothan B stepping CPU (Default) Short 2-3 : Clear CMOS Short 3-5 : 400MHZ for Banias or Dothan A , Dothan B stepping CPU Short 3-5, 4-6 : 533MHZ For Dothan A and B stepping CPU JP10 LAN1Ext. Link / Active LED #1 : 3.3V JP11 LAN2 Ext. Link / Active LED #1 : 3.3V JP12 LAN1 Ext. Speed LED #1 : 100 #2 : ACT / Link #2 : ACT / Link #3 : 1000 #2 : 3.3V JP13 LAN1 Ext. Speed LED #1 : 100 #3 : 1000 #2 : 3.3V 2 ©Copyright 2000 AXIOMTEK Co., Ltd. Version A1 June 2005 Printed in Taiwan SBC81872 Series Quick Installation Guide III. Connectors Connectors Label Connectors Labe l ATX 5VSB power connector CN1 COM1 CN13 System Fan1 CN2 COM2 CN14 System Fan2 CN3 Printer port CN15 ATX +12V power CN4 Serial ATA Channel 1 CN16 LVDS LCD Channel B CN5 Serial ATA Channel 0 CN17 LVDS LCD Channel A CN6 LAN2 RJ45 CN18 Pallare IDE port CN7 LAN1 RJ45 CN19 Floppy port CN8 VGA function CN20 CN9 CPU Fan Internal Mouse CN21 General output panel CN10 Internal Keyboard CN22 LCD power CN11 Mini PCI socket CN23 CN12 External KB/MS (Mini Din) CN24 USB 1,2 ©Copyright 2000 AXIOMTEK Co., Ltd. Version A1 June 2005 Printed in Taiwan 3 The complete version of the User’s Manual, along with the drivers/utilities software programs are in the Product Information CD of the SBC81872 Series CPU Card Kit. The connectors allow the CPU card to connect with other parts of the system. Some problems encountered by your system may be a result from loose or improper connections. Ensure that all connectors are in place and firmly attached. The following table lists the function of each connector on the SBC81872. SBC81872 Series Quick Installation Guide The complete version of the User’s Manual, along with the drivers/utilities software programs are in the Product Information CD of the SBC81872 Series CPU Card Kit. ©Copyright 2000 AXIOMTEK Co., Ltd. Version A1 June 2005 Printed in Taiwan 4 Board Layout V.