SMD Color Series CLM4B Blue and Green (pdf)

CLD-CT1302.001
PRODUCT FAMILY DATA SHEET
Cree® PLCC4 1-in-1 SMD LED
CLM4B-BKB/GKB
PRODUCT DESCRIPTION
FEATURES
APPLICATIONS
SMD LEDs is packaged in the industry
• Size (mm):3.2 x 2.7
• Light Strip
standard package. These LEDs have
• Color and Typical Dominant
Wavelength:
Blue (470nm)
Green (527nm)
• Channel Letter
high reliability performance and are
designed to work under a wide range
of environmental conditions.
This high reliability feature makes
them ideally suited to be used under
illumination application conditions.
Its wide viewing angle makes these
• Architectural Lighting
• Luminous Intensity (mcd)
CLM4B-BKB:(355 - 900)
CLM4B-GKB:(1120 - 2800)
• Lead-Free
• RoHS Compliant
LEDs ideally suited for channel letter,
or general backlighting and illumination applications. The flat top emitting
surface makes it easy for these LEDs
WWW.CREE.COM/HB
to mate with light pipes.
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
the Cree logo are registered trademarks of Cree, Inc.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Cree PLCC4 1 in 1 SMD LED
CLM4B-BKB/GKB
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
Blue/Green
Forward Current
IF
30
mA
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
126
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Junction Temperature
TJ
110
°C
Junction/Ambient
RTHJA
350
°C/W
Junction/Solder Point
RTHJS
200
°C/W
Peak Forward Current
Note
Note: Pulse width ≤0.1 msec, duty ≤1/10.
TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)
Characteristics
Color
Symbol
Condition
Forward Voltage
Blue/Green
VF
IF = 30 mA
V
Reverse Current
Blue/Green
IR
VR = 5 V
μA
Blue
λD
IF = 30 mA
nm
460
470
480
Green
λD
IF = 30 mA
nm
515
527
535
Blue
IV
IF = 30 mA
mcd
355
550
Green
IV
IF = 30 mA
mcd
1120
1800
Dominant Wavelength
Luminous Intensity
Unit
Minimum
Typical
Maximum
3.6
4.2
10
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
2
Cree PLCC4 1 in 1 SMD LED
CLM4B-BKB/GKB
INTENSITY BIN LIMIT (IF = 30 mA)
Blue (CLM4B-BKB)
Bin Code
Min.(mcd)
Max.(mcd)
Green (CLM4B-GKB)
Bin Code
Min.(mcd)
Max.(mcd)
Tb
355
450
Wa
1120
1400
Ua
450
560
Wb
1400
1800
Ub
560
710
Xa
1800
2240
Va
710
900
Xb
2240
2800
Tolerance of measurement of luminous intensity is ±10%.
COLOR BIN LIMIT (IF = 30 mA)
Blue (CLM4B-BKB) Green (CLM4B-GKB) Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
B3
460
465
G6
515
520
B4
465
470
G7
520
525
B5
470
475
G8
525
530
B6
475
480
G9
530
535
Tolerance of measurement of dominant wavelength is ±1 nm.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
3
Cree PLCC4 1 in 1 SMD LED
CLM4B-BKB/GKB
ORDER CODE TABLE*
Luminous Intensity (mcd)
Dominant Wavelength
Color
Kit Number
Min.
Max.
Color Bin
Min.(nm)
Color Bin
Max.(nm)
Blue
CLM4B-BKB-CTbVa363
355
900
B3
460
B6
480
Blue
CLM4B-BKB-CUaVa453
450
900
B4
465
B5
475
Color
Kit Number
Min.
Max.
Color Bin
Min.(nm)
Color Bin
Max.(nm)
Green
CLM4B-GKB-CWaXb693
1120
3550
G6
515
G9
535
Green
CLM4B-GKB-CWbXb793
1400
2800
G7
520
G9
535
Luminous Intensity (mcd)
Dominant Wavelength
Notes:
1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one
intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin
codes will not be orderable.
2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
4
Cree PLCC4 1 in 1 SMD LED
CLM4B-BKB/GKB
GRAPHS
(RELATIVE LUMINOUS INTENSITY)
5.0
IF (mA)
100.0
4.0
80.0
Blue
60.0
3.0
Green
40.0
2.0
20.0
1.0
Blue
Green
0.0
VF(V)
3.0
3.4
3.8
4.6
4.2
5.0
-50
-40
-30
-20
-10
20
60
40
80
IF(mA)
100
FIG.2 RELATIVE LUMINOUS INTENSITY VS.
FORWARD CURRENT
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
Vr(V)
0.0
0
0
0
(RELATIVE LUMINOUS INTENSITY)
100%
-10
80%
-20
60%
-30
40%
-40
20%
Blue
-50
Ir(uA)
FIG.3 BLUE & GREEN REVERSE CURRENT
VS. REVERSE VOLTAGE.
0%
300
Green
400
500
600
700
WL(nm)
800
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
WAVELENGTH.
(RELATIVE LUMINOUS INTENSITY)
IF(mA)
1.0
50
40
Rth j-s=200 C/W
30
0.5
20
Rth j-a=350 C/W
10
0
0
20
40
60
80
Ta( C)
100
FIG.5 BLUE&GREEN MAXIMUM FORWARD DC CURRENT VS AMBIENT
TEMPERATURE (Tjmax=110 C)
0
-90
Angle
-60
-30
0
30
60
90
FIG.6 FAR FIELD PATTERN
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
5
Cree PLCC4 1 in 1 SMD LED
CLM4B-BKB/GKB
MECHANICAL DIMENSIONS
All dimensions are in mm.
NOTES

RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
6
Cree PLCC4 1 in 1 SMD LED
CLM4B-BKB/GKB
KIT NUMBER SYSTEM
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and
brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp
Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
7
Cree PLCC4 1 in 1 SMD LED
CLM4B-BKB/GKB
PACKAGING
•
•
•
•
•
The boxes are not water resistant and they must be kept away from water and moisture.
The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
The reel pack is applied in SMD LED.
Max 2000 pcs per reel.






 
防潮珠。不可食

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
8