CLD-CT1083.001 PRODUCT FAMILY DATA SHEET Cree® PLCC6 3-in-1 SMD LED CLP6C-RKW/AKW PRODUCT DESCRIPTION FEATURES APPLICATIONS These SMD LEDs are packaged in the • Size (mm):6.0 x 5.0 • Light Strip industry standard CLPP6 package. • Color and Typical Dominant Wavelength: Red (618-630nm) Amber (584-596nm) • Channel Letter These high-reliability and high- brightness LEDs are designed to work in a wide range of environmental conditions and are ideally suited for use in illumination applications. Their wide viewing angle makes these LEDs ideally suited for channel • Backlight • Luminous Intensity (mcd) CLP6C-RKW:(3550 - 7100) CLP6C-AKW:(3550-9000) • Lead-Free • RoHS Compliant letter, or general backlighting and illumination applications. The flat top emitting surface makes it easy for WWW.CREE.COM/HB these LEDs to mate with light pipes. Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC6 3 in 1 SMD LED CLP6C-RKW/AKW ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Red/Amber Forward Current IF 3 x 80 mA IFP 3 x 200 mA Reverse Voltage VR 5 V Power Dissipation PD 3 x 240 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/Ambient RTHJA 3 x 250 °C/W Junction/Solder Point RTHJS 3 x 150 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD Peak Forward Current Note Class 2 Note: Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Color Symbol Condition Unit Forward Voltage Red/Amber VF IF = 50 mA V Reverse Current Red/Amber IR VR = 5 V μA Dominant Wavelength Luminous Intensity Minimum Typical Maximum 2.4 3.0 10 Red λD IF = 3 x 50 mA nm 618 624 630 Amber λD IF = 3 x 50 mA nm 584 591 596 Red IV IF = 3 x 50 mA mcd 3550 4800 Amber IV IF =3 x 50 mA mcd 3550 5000 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC6 3 in 1 SMD LED CLP6C-RKW/AKW INTENSITY BIN LIMIT (IF = 3 × 50 mA) Red (CLP6C-RKW) Bin Code Min.(mcd) Max.(mcd) Amber (CLP6C-AKW) Bin Code Min.(mcd) Max.(mcd) Yb 3550 4500 Yb 3550 4500 Z0 4500 5600 Z0 4500 5600 A0 5600 7100 A0 5600 7100 B0 7100 9000 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (IF = 3 × 50 mA) Red (CLP6C-RKW) Amber (CLP6C-AKW) Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) RA 618 630 AA 584 596 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC6 3 in 1 SMD LED CLP6C-RKW/AKW ORDER CODE TABLE* Luminous Intensity (mcd) Dominant Wavelength Color Kit Number Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Red CLP6C-RKW-CYbA0AA3 3550 7100 RA 618 RA 630 Red CLP6C-RKW-CZ0A0AA3 4500 7100 RA 618 RA 630 Color Kit Number Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Amber CLP6C-AKW-CYbB0AA3 3550 9000 AA 584 AA 596 Amber CLP6C-AKW-CZ0B0AA3 4500 9000 AA 584 AA 596 Luminous Intensity (mcd) Dominant Wavelength Notes: 1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC6 3 in 1 SMD LED CLP6C-RKW/AKW GRAPHS (RELATIVE LUMINOUS INTENSITY) IF (mA) 100.0 2.5 80.0 2.0 60.0 1.5 Red Yellow Red 40.0 1.0 20.0 0.5 0.0 VF(V) 1.8 2.0 2.2 2.4 2.6 2.8 Yellow 0.0 0 20 40 60 80 IF(mA) 100 FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. (RELATIVE LUMINOUS INTENSITY) Vr(V) -50 -40 -30 -20 -10 0 0 -10 100% 80% Amber -20 60% -30 40% -40 20% -50 Ir(uA) FIG.3 RED &YELLOW REVERSE CURRENT VS. REVERSE VOLTAGE. 0% 300 400 500 Red 600 700 WL(nm) 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. (RELATIVE LUMINOUS INTENSITY) IF(mA) 1.0 100 Rth j-s=150 C/W 80 60 0.5 40 Rth j-a=250 C/W 20 0 0 20 40 60 80 Ta( C) 100 FIG.5 RED &YELLOW MAXIMUM FORWARD DCCURRENT VS AMBIENT TEMPERATURE (Tjmax=110 C) 0 -90 -60 -30 0 30 60 90 Angle FIG.6 FAR FIELD PATTERN The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC6 3 in 1 SMD LED CLP6C-RKW/AKW MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC6 3 in 1 SMD LED CLP6C-RKW/AKW KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC6 3 in 1 SMD LED CLP6C-RKW/AKW PACKAGING • • • • • The boxes are not water-resistant, and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 900 pcs per reel. 10% 20% 30% 40% DANGEROUS DO NOT EAT DESICCANT 防潮 珠。 不可食 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8