Download Data Sheet

WMIPEM1024 SERIES
16~36 Watts, Medical AC/DC Wall Mount Power
Supplies
Rev A
FEATURES
• RoHS & WEEE Compliant
• Single Outputs Ranging from 5VDC to
• 90-264VAC Input Voltage Range
48VDC
• 16~36 Watts Output Power
• UL/cUL 60601-1: 3rd Edition & TUV/SUD
• Over Voltage & Short Circuit Protection
EN/IEC 60601-1: 3rd Edition Medical
• 0 to +40°C Operating Temperature Range
Approvals
• CEC Level V, VI Compliant
• United States, China, United Kingdom,
• Several Output Connector Options
Europe, Australia, and South Africa Plug
Available
Size:
2.90 x 1.69 x 1.28 inches
Types Available
DESCRIPTION
Weight:
7.05oz (200g)
AC Plug Types:
• Unites States (“U” Suffix)
• China (“C” Suffix)
• South Africa (“S” Suffix)
• Europe (“E” Suffix)
• United Kingdom (“K” Suffix) • Australia (“A”
Suffix”)
The WMIPEM1024 series of medical AC/DC wall mount power supplies provides up to 36
watts of output power in a 2.90” x 1.69” x 1.28” package. This series consists of single
output models ranging from 5VDC to 48VDC with an input voltage range of 90~264VAC.
This series is RoHS and WEEE compliant and meets CEC Level V, VI requirements. This
series also has UL/cUL 60601-1 and TUV/SUD EN/IEC 60601-1: 3rd edition medical
approvals. These supplies are protected against over voltage and short circuit conditions.
Interchangeable plugs are sold separately and are available in United States (U suffix),
China (C suffix), United Kingdom (K suffix), Europe (E suffix), Australia (A suffix), and
South Africa (S suffix) types.
MODEL SELECTION TABLE
Model Number
(1)
Input Voltage
Range
Output Voltage
(2)
Output Current
Min
Max
Load
Line
Ripple & Noise (3)
Regulation Regulation
Output
Power
WMIPEM1024Ax
5 ~ 8 VDC
0A
2.0A
±5%
±1%
100mVp-p
16W
WMIPEM1024Bx
5 ~ 8 VDC
0A
3.0A
±5%
±1%
100mVp-p
20W
WMIPEM1024Cx
5 ~ 8 VDC
0A
4.0A
±5%
±1%
100mVp-p
24W
WMIPEM1024Dx
9 ~ 11 VDC
0A
1.5A
±5%
±1%
250mVp-p
18W
WMIPEM1024Ex
9 ~ 11 VDC
0A
2.0A
±5%
±1%
250mVp-p
24W
WMIPEM1024Fx
9 ~ 11 VDC
0A
3.0A
±5%
±1%
250mVp-p
27W
WMIPEM1024Gx
12 ~ 17 VDC
0A
1.66A
±5%
±1%
250mVp-p
20W
12 ~ 17 VDC
0A
2.5A
±5%
±1%
250mVp-p
30W
WMIPEM1024Jx
18 ~ 24 VDC
0A
1.33A
±5%
±1%
350mVp-p
24W
WMIPEM1024Kx
18 ~ 24 VDC
0A
1.66A
±5%
±1%
350mVp-p
30W
WMIPEM1024Mx
36 ~ 48 VDC
0A
0.55A
±5%
±1%
480mVp-p
20W
WMIPEM1024Nx
36 ~ 48 VDC
0A
0.83A
±5%
±1%
480mVp-p
30W
WMIPEM1024Px
12 VDC
0A
3.0A
±5%
±1%
250mVp-p
36W
WMIPEM1024Qx
12 VDC
0A
2.0A
±5%
±1%
250mVp-p
24W
WMIPEM1024Rx
24 VDC
0A
1.5A
±5%
±1%
350mVp-p
36W
WMIPEM1024Hx
10/02/2014
100 ~ 240 VAC
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 1 of 3
Rev A
WMIPEM1024 SERIES
16~36 Watts, Medical AC/DC Wall Mount Power
Supplies
SPECIFICATIONS: WMIPEM1024 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
100
90
47
0.5
115/230
115/230
50/60
240
264
63
1.0
60
0.3
Unit
INPUT SPECIFICATIONS
Rated input voltage range
Operating input voltage range
Input Voltage
Input Frequency
Input Current
Inrush Current
Cold start
No load Power Consumption
115VAC/60Hz; 230VAC/50Hz
OUTPUT SPECIFICATIONS
Output Voltage(2)
Line Regulation
Load Regulation
Output Power
Output Current
Minimum Load
Ripple & Noise(3)
20MHz limited bandwidth
Hold-Up Time
Turn-on Time
PROTECTION
Over Voltage Protection
Short Circuit Protection
GENERAL SPECIFICATIONS
Efficiency
Withstand Voltage
5mA, 2 sec between primary and secondary circuit
Isolation Resistance
500VDC, 3 seconds between primary and secondary
Leakage Current
240VAC/50Hz
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Cooling
MTBF
PHYSICAL SPECIFICATIONS
Dimensions (L x W x H)
Weight
Output Connector
AC Plug Types
SAFETY & COMPLIANCE
Compliance
Safety Approvals
10/02/2014
“U” suffix
“K” suffix
“E” suffix
“A” suffix
“C” suffix
“S” suffix
-1
-5
VAC
Hz
A
A
W
See Table
+1
+5
See Table
See Table
%
%
0
mA
See Table
8.3
3
ms
s
Automatic recovery
Automatic recovery
Meets CEC Level V, VI
4000
50
VAC
MΩ
µA
100
0
-20
10
5
+40
+85
90
95
Free air convection
°C
°C
%
%
30,000
hours
2.90 x 1.69 x 1.28 inch
(73.6 x 42.9 x 32.4 mm)
7.05oz (200g)
Contact factory for options
United States
United Kingdom
Europe
Australia
China
South Africa
RoHS, WEEE, and CEC Level V, VI
UL/cUL 60601-1: 3rd Edition
TUV/SUD EN/IEC 60601-1: 3rd Edition
CB, CE, FCC CCC
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 2 of 3
Rev A
WMIPEM1024 SERIES
16~36 Watts, Medical AC/DC Wall Mount Power
Supplies
NOTES
1. The “x” in the model number represents the type of AC plug: “x” can be “U” for United States type, “C” for China type, “K” for United
Kingdom type, “E” for Europe type, “A” for Australia type, or “S” for South Africa type.
2. The output voltage is specified as a range (Ex: 36~48 VDC); the customer must specify what they want the voltage set at.
3. Ripple and Noise is measured at nominal line and full load with 20MHz bandwidth and a 0.1µF ceramic capacitor and 47µF aluminum
capacitors in parallel across the output.
4. Optional output connectors are available. Please call factory for ordering details.
MECHANICAL DRAWING
COMPANY
INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will
provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example
of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its
customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for
your project above and beyond the design and production phases. Give us a call today to discuss your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
10/02/2014
(603)778-2300
(888)597-9255
(603)778-9797
sales@wallindustries.com
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 3 of 3