Thyristors Module Teccor® brand Thyristors 90A AC Controller Module MS0690J-DL1TE RoHS Description Thyristor AC controller module for mains frequency (50Hz/60Hz), utilizing two SCR dies in anti-parallel configuration for applications such as heating. Robust SOT227B package with isolation voltage 2500V minimum Features & Benefits • High current handling capability, IT(RMS)=90A • Glass – passivated junctions • Surge capability up to 950 A Applications Agency Approval Agency • Compact and robust SOT227B package High power electrical tankless water heater Agency File Number E71639 Main Features Symbol Value Unit IT(RMS) 90 A VDRM /VRRM 600 V IGT 50 mA Schematic Symbol G1 K1/A2 K2/A1 G2 MS0690J-DL1TE ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 10/19/15 Thyristors Module Teccor® brand Thyristors 90A AC Controller Module Absolute Maximum Ratings Symbol Parameter On-State RMS Current - 360° as module IT(RMS) IT(AV) Test Conditions Average On-State Current - 360° as module ITSM Peak Non-Repetitive Surge Current, single cycle 60Hz 64 It I t Value for fusing di/dt Critical Rate-of-Rise of On-State Current PGM Peak Gate Power Dissipation PG(AV) Average Gate Power Dissipation 41 Unit A A 950 A tp =8.3ms 3745 A2s IG = 150mA, f=60Hz, TJ=125°C 200 A/μs TJ = 125°C, Tp=30μs 10 TJ = 125°C, Tp=300μs 5 TJ = 125°C 1.0 W Storage Junction Temperature Range -40 to 150 °C Operating junction Temperature Range -40 to 125 °C 2 TJ 65 TC = 92°C Average On-State Current - 180° as single SCR Tstg 90 TC = 92°C On-State RMS Current - 180° as single SCR 2 Value W Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol Parameter Test Conditions IGT DC Gate Trigger Current VGT DC Gate Trigger Voltage IH VD = 12V; RL = 30 Ω Value min. 5 max. Unit 50 mA 1.6 V 80 mA Holding Current IT=400mA (initial) Critical Rate-of-Rise of Off-State Voltage TJ = 125°C, VD = VDRM/VRRM, Exponential Waveform, Gate Open tq Turn-Off Time IT=2A, TP=50μs, dv/dt=5V/μs, di/dt=-30A/μs 35 μs tgt Turn-On Time IG = 150mA, PW =15 μs, IT = 130A(pk) 3 μs Value Unit 1.8 V dv/dt 500 V/μs Static Characteristics Symbol Test Conditions VTM Peak On-State Voltage IDRM IRRM VD = VDRM / VRRM IT = 130 A Peak, TP =380μs TJ = 25°C TJ = 125°C MAX. MAX. 20 μA 3000 μA Thermal Resistances Symbol Rθ(J-C) MS0690J-DL1TE Parameter Value Unit Thermal Resistance, Junction to Case 0.3 °C/W ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 10/19/15 Thyristors Module Teccor® brand Thyristors 90A AC Controller Module Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature Figure 2: Normalized DC Gate Trigger Voltage vs. Junction Temperature 2.0 Ratio of VGT /VGT (TJ=25°C) Ratio of IGT /IGT (TJ = 25°C) 2.0 1.5 1.0 0.5 0.0 -40 -15 10 35 60 85 110 1.5 1.0 0.5 0.0 125 -40 -15 10 Junction Temperature (TJ) -- (°C) Figure 3: Normalized DC Holding Current vs. Junction Temperature 60 85 110 125 Figure 4: On-State Current vs. On-State Voltage (Typical, per SCR) 200 Instantaneous On-state Current (iT) – Amps 2.0 Ratio of IH /IH (TJ =25°C) 35 Junction Temperature (TJ) -- (°C) 1.5 1.0 0.5 TJ = 25°C 180 160 140 120 100 80 60 40 20 0 0.0 -40 -15 10 35 60 85 110 0.7 125 0.8 Junction Temperature (TJ) -- (°C) 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Instantaneous On-state Voltage (vT) – Volts Figure 5: Power Dissipation (Typical) vs. RMS On-State Current per SCR Figure 6: Maximum Allowable Case Temperature vs. RMS On-State Current per module 130 60 Maximum Allowable Case Temperature (TC)-°C Average On-State Power Dissipation [PD (AV)] - (W atts) 125 120 50 115 110 40 105 100 30 20 10 0 0 10 20 30 40 50 RMS On-State Current [IT(R MS)] - (Am ps) MS0690J-DL1TE 60 70 95 90 85 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 75 70 0 10 20 30 40 50 60 70 80 90 100 RMS On-State Current [IT(RMS)] - Amps ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 10/19/15 Thyristors Module Teccor® brand Thyristors 90A AC Controller Module Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current per module 130 Maximum Allowable Case Temperature (TC)-°C 125 120 115 110 105 100 95 90 85 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 75 70 0 10 20 30 40 50 60 70 80 90 100 Average On-State Current [IT(AVE)] - Amps Figure 7: Surge Peak On-State Current vs. Number of Cycles SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Peak Surge (Non-repetitive) On-state Current (ITSM) – Amps 1000 Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. 100 10 1 10 100 1000 Surge Current Duration -- Full Cycles MS0690J-DL1TE ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 10/19/15 Thyristors Module Teccor® brand Thyristors 90A AC Controller Module Physical Specifications Environmental Specifications Test Terminal Finish 100% Nickel Plated Body UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy Specifications and Conditions AC Blocking Intermittent Operational Life Temperature/ Humidity High Temp Storage Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours MIL-STD-750, Method 1037, 15000cycles, ΔTJ ≥ 100°C EIA / JEDEC, JESD22-A101 504 hours; 160V - DC: 85°C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150°C Low-Temp Storage 1008 hours; -40°C Temperature Cycling MIL-STD-750, M-1051, 20 cycles; -25°C to +125°C; 15-min dwell-time Dimensions SOT-227 B Dimension 4 3 1 2 PIN 1: K2/A1 PIN 2: G1 PIN 3: K1/A2 PIN 4: G2 Note: M4x7.5MM screw, 4 screws per unit. MS0690J-DL1TE A B C D E F G H J K L M N O P Q R S T U V Inches Millimeters Min Max Min Max 1.240 0.307 0.161 0.161 0.161 0.587 1.186 1.489 0.460 0.351 0.030 0.497 0.990 0.078 0.193 1.045 0.155 0.186 0.968 0 0.130 1.256 0.323 0.169 0.169 0.169 0.595 1.193 1.505 0.481 0.378 0.033 0.507 1.001 0.084 0.232 1.059 0.174 0.191 0.987 0.005 0.180 31.50 7.80 4.09 4.09 4.09 14.91 30.12 37.80 11.68 8.92 0.76 12.62 25.15 1.98 4.90 26.54 3.94 4.72 24.50 0 3.30 31.90 8.20 4.29 4.29 4.29 15.11 30.30 38.20 12.22 9.60 0.84 12.88 25.42 2.13 5.89 26.90 4.42 4.85 25.07 0.127 4.57 ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 10/19/15 Thyristors Module Teccor® brand Thyristors 90A AC Controller Module Packing Options Part Number Weight Packing Mode Base Quantity 30g Tube 160 MS0690J-DL1TE Part Numbering System Part Marking System M S 06 90 J - D L1TE Module products MS0690J-DL1TE Manufacturing Location Code ® SCR module Voltage Rating 60: 600V Current Rating 90: 90A MS0690J-DL1TE YMXXX Circuit Variation D: 2 SCR die in anti-parallel configuration Package Type J: SOT227B Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 10/19/15