GDSSF2814E DESCRIPTION The SSF2814E uses advanced trench technology to provide excellent RDS(ON), low gate charge and operation with gate voltages as low as 2.5V. GENERAL FEATURES ● VDS = 20V,ID = 7A RDS(ON) < 28mΩ @ VGS=2.5V RDS(ON) < 26mΩ @ VGS=3.1V RDS(ON) < 22mΩ @ VGS=4V RDS(ON) < 20mΩ @ VGS=4.5V Schematic diagram ESD Rating：2000V HBM ● High Power and current handing capability ● Lead free product is acquired ● Surface Mount Package Marking and pin Assignment Application ●Battery protection ●Load switch ●Power management TSSOP-8 top view PACKAGE MARKING AND ORDERING INFORMATION Device Marking Device Device Package Reel Size Tape width Quantity SSF2814E SSF2814E TSSOP-8 Ø330mm 12mm 3000 units ABSOLUTE MAXIMUM RATINGS(TA=25℃unless otherwise noted) Parameter Symbol Limit Unit Drain-Source Voltage VDS 20 V Gate-Source Voltage VGS ±12 V ID 7 A IDM 25 A PD 1.5 W TJ,TSTG -55 To 150 ℃ RθJA 83 ℃/W Drain Current-Continuous@ Current-Pulsed (Note 1) Maximum Power Dissipation Operating Junction and Storage Temperature Range THERMAL CHARACTERISTICS Thermal Resistance,Junction-to-Ambient (Note 2) Suzhou Goodark Electronics Co., Ltd Version 1.0 GDSSF2814E ELECTRICAL CHARACTERISTICS (TA=25℃unless otherwise noted) Parameter Symbol Condition Min Typ Max Unit OFF CHARACTERISTICS Drain-Source Breakdown Voltage BVDSS VGS=0V ID=250μA 20 V Zero Gate Voltage Drain Current IDSS VDS=20V,VGS=0V 1 μA nA IGSS VGS=±4.5V,VDS=0V ±200 Gate-Body Leakage Current VGS=±10V,VDS=0V ±10 uA 0.75 1.2 V VGS=4.5V, ID=6.5A 14 20 mΩ VGS=4V, ID=6A 16 22 mΩ VGS=3.1V, ID=5.5A 19 26 mΩ VGS=2.5V, ID=5.5A 24 28 mΩ VDS=10V,ID=6.5A 6.6 S 650 PF 360 PF PF ON CHARACTERISTICS (Note 3) Gate Threshold Voltage Drain-Source On-State Resistance Forward Transconductance VGS(th) VDS=VGS,ID=250μA 0.6 RDS(ON) gFS DYNAMIC CHARACTERISTICS (Note4) Input Capacitance Clss VDS=8V,VGS=0V, F=1.0MHz Output Capacitance Coss Reverse Transfer Capacitance Crss 154 Turn-on Delay Time td(on) 11 22 nS Turn-on Rise Time tr 12 28 nS 35 73 nS 33 65 nS 11 16 nC SWITCHING CHARACTERISTICS (Note 4) Turn-Off Delay Time td(off) Turn-Off Fall Time tf Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd VDD=10V,ID=1A VGS=4.5V,RGEN=6Ω VDS=10V,ID=7A, VGS=4.5V 2.5 nC 3.2 nC DRAIN-SOURCE DIODE CHARACTERISTICS Diode Forward Voltage (Note 3) VSD VGS=0V,IS=1.5A 0.84 NOTES: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. Surface Mounted on FR4 Board, t ≤ 10 sec. 3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%. 4. Guaranteed by design, not subject to production testing. Suzhou Goodark Electronics Co., Ltd Version 1.0 1.2 V GDSSF2814E TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS Vdd Vgs Rgen D Vout toff tf td(off) 90% Rl Vin ton tr td(on) VOUT 90% INVERTED 10% 10% G 90% VIN S 50% 50% 10% PULSE WIDTH Figure 2:Switching Waveforms r(t),Normalized Effective Transient Thermal Impedance Figure 1:Switching Test Circuit Square Wave Pluse Duration(sec) Figure 3 Normalized Maximum Transient Thermal Impedance Suzhou Goodark Electronics Co., Ltd Version 1.0 GDSSF2814E TSSOP-8 PACKAGE INFORMATION NOTES： 1. Dimensions are inclusive of plating 2. Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than 6 mils. 3. Dimension L is measured in gauge plane. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact. Suzhou Goodark Electronics Co., Ltd Version 1.0