DATA SHEET SKY65450-92LF: 40 MHz to 1 GHz Broadband 75 Ω CATV Low-Noise Amplifier with Bypass Mode Applications Terrestrial and cable set-top box RF Input Cable modem LNA RF Output Home gateway Personal video recorder (PVR) 203094E-001 Digital video recorder (DVR) Figure 1. SKY65450-92LF Block Diagram Features Description Small signal gain: 15 dB typical Best in Class linearity Low noise figure: 2.9 dB typical Bypass mode current consumption < 5 mA Input/output impedance internally matched to 75 Ω Minimal number of external components required The SKY65450-92LF is a Microwave Monolithic Integrated Circuit (MMIC) front-end low-noise amplifier (LNA) designed especially for set-top box applications. The device provides high linearity, excellent gain, and best in class Composite Triple Beat (CTB) and Composite Second Order (CSO). There are minimal external components. Small, 6-pin SC-70 (SC-88, SOT-363) plastic SMT package Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. 5 The SKY65450-92LF is fabricated using SiGe BiCMOS technology. The LNA uses surface-mount technology (SMT) in a 6-pin SC-70 package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. 4 203094E-002 6 The SKY65450-92LF is optimized to operate between 40 MHz and 1 GHz, which makes it ideal for cable and terrestrial set-top box and home gateway applications. 1 2 3 Figure 2. SKY65450-92LF Pinout (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203094F • Skyworks Proprietary Iinformation • Products and Product Information are Subject to Change Without Notice • February 18, 2016 1 DATA SHEET • SKY65450-92LF: 40 MHz TO 1 GHz BROADBAND 75 Ω CATV LNA WITH BYPASS MODE Table 1. SKY65450-92LF Signal Descriptions Pin Name Description Pin Name Description 1 RFOUT RF output 4 Bypass CTRL Bypass CTRL (0 = bypass mode, 1 = gain mode, floating = gain mode) 2 VCC Source voltage 5 GND Ground 3 NC Not connected 6 RFIN RF input Technical Description Electrical and Mechanical Specifications The SKY65450-92LF is a single-stage, low-noise amplifier with a bypass switch that operates with a single 3.3 V power supply connected through an RF choke (inductor L1) to the output signal (pin 1). The bias current is set by the R1 external resistor. The device is internally RF-matched and only requires input and out blocking capacitors C1 and C2 to operate over a frequency range of 40 MHz to 1 GHz. The absolute maximum ratings of the SKY65450-92LF are provided in Table 2. The recommended operating conditions are specified in Table 3, and electrical specifications are provided in Table 4. Table 2. SKY65450-92LF Absolute Maximum Ratings1 Parameter Symbol RF input power PIN Supply voltage VCC Logic high voltage VHIGH Storage temperature TSTG Junction temperature TJ Electrostatic discharge: ESD Minimum Maximum Units 20 dBm 1.4 3.6 V VCC V –55 +125 C +125 C 1500 1500 V V Human Body Model (HBM), Class 1C Charged-Device Model (CDM), Class C3 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. SKY65450-92LF Recommended Operating Conditions Parameter Frequency Symbol f Supply Minimum 40 3.1 Logic high voltage VIH Logic low voltage VIL Ambient temperature Typical 1.4 3.3 Maximum Units 1000 MHz 3. 5 V VCC V 0 0.7 V –40 +85 C Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 February 18, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203094F DATA SHEET • SKY65450-92LF: 40 MHz TO 1 GHz BROADBAND 75 Ω CATV LNA WITH BYPASS MODE Table 4. SKY65450-92LF Electrical Specifications1 (VCC = 3.3 V, Bypass Control = 3.3 V, TC = +25 °C, f = 500 MHz, PIN = –15 dBm/Tone, Unless Otherwise Noted) Parameter Symbol Minimum Typical Maximum Units Main Input to Output 75 Ω Supply current2 Icc 42 mA Supply current (bypass mode) Icc_BYPASS 2.5 5 mA Gain |S21| 15 16 dB Impedance I/O 14 Gain (bypass mode) –2.5 dB Gain flatness 0.6 dB Reverse isolation Noise figure NF Noise figure (bypass mode) Third order output intercept point @ 42 mA3 OIP3 Third order output intercept point (bypass mode3 19 dB 2.9 dB 3.0 dB +28.4 dBm +28 dBm Input return loss |S11| 21 dB Output return loss |S22| 19 dB Input return loss (bypass mode) 11 dB Output return loss (bypass mode) 11 dB 1 Performance is guaranteed only under the conditions listed in this table. 2 ICC Test Condition: No RF is applied to devices and RF input/output are 75 Ω terminated. 3 OIP3 Test Condition: f1 = 1000 MHz, f2 = 1001 MHz. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203094F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 18, 2016 3 DATA SHEET • SKY65450-92LF: 40 MHz TO 1 GHz BROADBAND 75 Ω CATV LNA WITH BYPASS MODE Evaluation Board Description The Skyworks SKY65450-92LF Evaluation Board is used to test the performance of the SKY65450-92LF low-noise amplifier. Figure 3 shows an application schematic for the SKY65450-92LF. An assembly drawing for the Evaluation Board is shown in Figure 4, and the layer detail physical characteristics are noted in Figure 5. Typical part marking is shown in Figure 6. Capacitor C5 provides DC bias decoupling for the output stage collector voltage. Pins 6 and 1 are the RF input and output signals, respectively. External DC blocking is provided on the input and output by capacitors C1 and C2. Ground pin 5 and the center ground pad provide the DC and RF ground. Resistor R1 is the bias resistor that can be used to optimize the current and performance of the LNA and L1 is a choke inductor which connects the Vcc to the output stage of the LNA. Pin 2 provides an enable function and has an optional RC circuit held in place by resistor R2 and capacitor C3. Pin 3 is a no connect pin and can be left floating or may be grounded. The input and output RF traces are 75 Ω traces. VCC R1 6Ω L1 Bead (1.5 KΩ) RF Output 75 Ω trace J1 C2 1 U1 RFOUT RFIN 2 VCC GND 3 N/C EN C4 10 nF U1_3 RF Input 75 Ω trace J2 10 nF 10 nF C5 10 μF C1 6 5 4 R2 1.8 KΩ VEN C3 10 nF P1 VCC VEN U1_3 6 5 4 3 2 1 Header 4 203094E-003 Figure 3. SKY65450-92LF Application Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 February 18, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203094F DATA SHEET • SKY65450-92LF: 40 MHz TO 1 GHz BROADBAND 75 Ω CATV LNA WITH BYPASS MODE RFIN RFOUT C2 J1 L1 C1 C4 J2 U1 C3 R1 R2 C5 P1 203094E-004 Figure 4. SKY65450-92LF Evaluation Board Assembly Diagram 75 Ω Cross Section W = 1.270 mm Thickness Materials Tmask L1 0.010 mm 0.025 mm Solder Resist Cu – 1 oz Dielectric 1.500 mm FR4 L4 Bmask 0.025 mm 0.010 mm Cu – 1 oz Solder Resist Name 203094E-005 Figure 5. Layer Detail Physical Characteristics Skyworks Part Number 450 203094E-006 Pin 1 Indicator Figure 6. Typical Part Marking Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203094F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 18, 2016 5 DATA SHEET • SKY65450-92LF: 40 MHz TO 1 GHz BROADBAND 75 Ω CATV LNA WITH BYPASS MODE Package Dimensions The SKY65450-92LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note: Solder Reflow Information, document number 200164. The SKY65450-92LF is packaged in a standard 6-Lead SC-70 (SC-88 or SOT-363). Figure 7 shows the package dimensions. Tape and reel dimensions are shown in Figure 8. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Package and Handling Information Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. 0.079 (2.00 mm) ±0.008 (0.20 mm) 0.0256 (0.65 mm) BSC 0.087 (2.20 mm) ±0.008 (0.20 mm) 0.049 (1.25 mm) ±0.004 (0.10 mm) 0.009 (0.23 mm) Ref Pin 1 Indicator 0.035 (0.90 mm) ±0.004 (0.10 mm) 0.010 (0.25 mm) ±0.006 (0.15 mm) 0.0055 (0.14 mm) ±0.0015 (0.04 mm) 0.002 (0.005 mm) ±0.002 (0.005 mm) 0.037 (0.95 mm) ±0.006 (0.15 mm) 0.008 (0.20 mm) ±0.004 (0.10 mm) 203094E-006 Figure 7. SKY65450-92LF Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 February 18, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203094F DATA SHEET • SKY65450-92LF: 40 MHz TO 1 GHz BROADBAND 75 Ω CATV LNA WITH BYPASS MODE 4.00 ± 0.10 4.00 (See Note 5) 2.00 ± 0.05 ø1.50 +0.10 –0 3.50 ± 0.05 1.75 ± 0.10 8.00 + 0.30 –0.10 Pin 1 Indicator R0.3 Typ ø1.00 Min. 0.30 ± 0.05 Notes: 1. Carrier tape: black conductive polystyrene. 2. Cover tape: transparent conductive HSA. 3. Cover tape size: 5.4 mm width. 4. All dimensions are in millimeters. 5. 10-sprocket hole pitch cumulative tolerance: ±0.20. 2.25 ± 0.10 1.20 ± 0.10 Ao Ko 2.70 ± 0.10 Bo 203094E-007 Figure 8. SKY65450-92LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203094F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 18, 2016 7 DATA SHEET • SKY65450-92LF: 40 MHz TO 1 GHz BROADBAND 75 Ω CATV LNA WITH BYPASS MODE Ordering Information Model Name SKY65450-92LF: 40 MHz to 1 GHz Broadband 75 Ω CATV Low-Noise Amplifier Manufacturing Part Number SKY65450-92LF Evaluation Board Part Number TW21-D850 Copyright © 2014-2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 February 18, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203094F